laser engraving machine 3040

CO2 laser engravers are very good at cutting and engraving non-metallic materials, the materials that can be cut and engraved include:
wood, acrylic, paper, cloth, epoxy resin, plastic, rubber, crystal, etc.
CO2 laser cutting machines are widely used in clothing, leather, cloth toys, computer embroidery and cutting, electronic appliances, models, handicrafts, advertising and other industries, as well as decoration, packaging and printing, paper products and other industries.

The advantages of carbon dioxide laser engraving machines when engraving objects are very obvious: low cost and not limited by the number of processing. For low volume machining services, laser machining is cheaper.
The materials that CO2 laser engraving machine can cut and engrave include wood, acrylic, paper, cloth, epoxy, plastic, rubber, crystal, etc.
3040 CO2 laser engraving and cutting machine is small in size and does not take up space, it is very suitable for DIY or home studio use

The CO2 laser engraving machine has obvious advantages in processing:
1. Energy saving and environmental protection: the diameter of the beam and the spot is small, generally less than 0.5mm; the cutting process saves materials and is safe and hygienic;
2. Consistent effect: ensure that the processing effect of the same batch is completely consistent.
3. High-speed and fast: high-speed engraving and cutting can be performed immediately according to the pattern output by the computer.

The advantages of co2 laser engraving machine processing:
1. Wide range: carbon dioxide laser can engrave and cut almost any non-metallic material. And it’s cheap!
2. Safe and reliable: non-contact processing will not cause mechanical extrusion or mechanical stress to the material. No “knife marks”, no damage to the surface of the workpiece; no deformation of the material;
3. Precise and meticulous: the machining accuracy can reach 0.02mm

Laser engraving is to use the computer to control the x-y console to drive the laser head to move, and to control the laser switch as needed. The image information processed by the software has been stored in the computer in a certain way. When the information is sequentially read from the computer, the laser head scans back and forth line by line from left to right and top to bottom along the scanning track.
The 3040 laser engraving machine meets the engraving needs of most materials, such as wood, acrylic, etc.

The co2 laser engraving machine is an engraving machine using co2 laser technology. This type of laser equipment is a general-purpose model with a rear focus method, small size and high degree of integration.
The laser beam is transmitted and focused on the surface of the material by the optical mechanism, and the material at the action point of the high-energy density laser beam is rapidly vaporized to form pit points, thereby realizing engraving and cutting.

CO2 laser engraving and cutting machines are widely used in life, and most materials and industries use CO2 laser engraving machines
Applicable materials:
CO2 laser cutting and engraving machine is usually used for non-metallic materials such as acrylic, wood, leather, paper, plexiglass, rubber, etc.
Applicable industries:
Rubber, plastic, cloth toys, leather, computerized embroidery cutting, molds, handicrafts, bamboo and wood, advertising and architectural decoration, packaging and printing, paper products.

The 3040 CO2 laser engraver can be used to engrave and cut a wide variety of materials, such as wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics, and glass.
Widely used in advertising, gifts, shoe materials, toys and other industries.
At the same time, the CO2 laser engraving machine has various image formats such as HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI and so on.

CO2 laser engravers are very good at cutting and engraving non-metallic materials, the materials that can be cut and engraved include:
wood, acrylic, paper, cloth, epoxy resin, plastic, rubber, crystal, etc.
CO2 laser cutting machines are widely used in clothing, leather, cloth toys, computer embroidery and cutting, electronic appliances, models, handicrafts, advertising and other industries, as well as decoration, packaging and printing, paper products and other industries.

The co2 laser engraving machine has low cost when engraving items, and is not limited by the number of processing. For small batch processing services, laser processing is cheaper.
Low cost: Not limited by the number of processing, for small batch processing services, laser processing is cheaper.
The materials that CO2 laser engraving machine can cut and engrave include wood, acrylic, paper, cloth, epoxy resin, plastic, rubber, crystal, etc.

The advantages of co2 laser engraving machine processing:
1. Saving and environmental protection: the diameter of the beam and the spot is small, generally less than 0.5mm; the cutting process saves materials and is safe and hygienic;
2. Consistent effect: ensure that the processing effect of the same batch is completely consistent.
3. High-speed and fast: high-speed engraving and cutting can be performed immediately according to the pattern output by the computer.

The advantages of co2 laser engraving machine processing:
1. Wide range: carbon dioxide laser can engrave and cut almost any non-metallic material. And it’s cheap!
2. Safe and reliable: non-contact processing will not cause mechanical extrusion or mechanical stress to the material. No “knife marks”, no damage to the surface of the workpiece; no deformation of the material;
3. Precise and meticulous: the machining accuracy can reach 0.02mm

Laser engraving is to use the computer to control the x-y console to drive the laser head to move and control the switch of the laser as required. The image information processed by the software has been stored in the computer in a certain way. When the information is read from the computer in sequence, The laser head scans back and forth line by line from left to right and top to bottom along the scanning track.
The 3040 laser engraver meets the engraving needs of most materials

The co2 laser engraving machine is an engraving machine using co2 laser technology. This type of laser equipment is a general-purpose model with a rear focus method, small size and high degree of integration.
The laser beam is transmitted and focused on the surface of the material by the optical mechanism, and the material at the action point of the high-energy density laser beam is rapidly vaporized to form pit points, thereby realizing engraving and cutting.

✦Applicable Materials:
CO2 laser cutting and engraving machine is usually used in acrylic,wood, leather, paper, plexiglax,rubber and other nonmetal materials
✦Applicable Industries:
Rubber,plastic,cloth toys,leather ,computer embroidery cutting, mould, crafts ,bamboo and wood, advertising and building decoration ,packaging and printing ,paper products.

Machine Features
✦The drive system adopts high-precision linear guides and sliders, with high precision, wear resistance, low resistance, and fast speed; stable transmission, strong shock absorption capacity, and low noise.
✦The positioning of the red light is accurate, and it is convenient and quick to locate the engraving and cutting position.
✦The laser head is responsive and accurate to ensure the quality of engraving.

3040 CO2 laser engraving machine is mainly used in wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics and glass, etc.
It is widely used in advertising, gifts, shoe materials, toys and other industries.
At the same time, CO2 laser engraving machine has a variety of image formats, such as HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI.

CO2 engraving machines are very widely used in the leather industry. The use of laser cutting machines breaks the problems of traditional manual and electric shears, such as slow speed, difficult typesetting, low efficiency and serious material waste. It is fast and easy to operate
Applicable industries:
advertisement, arts and crafts, leather, toys, garments, model , building upholster, computerized embroidery and clipping, packaging and paper industry.

The application of laser engraving crafts is very wide, which can be divided into: paper laser engraving crafts, fabric laser engraving crafts, bamboo laser engraving crafts, leather laser engraving crafts, glass engraving crafts, metal laser engraving crafts, jewelry and jade laser engraving crafts…

The principle of laser engraving handicrafts refers to the use of high-energy conspiracy laser beams projected onto the surface of the material, so that the surface of the material can undergo physical and chemical changes, so as to obtain engraving handicrafts with visible patterns.
The engraving machine canbe used in crafts, models, advertising, decoration, electrical appliances, plastic industry acrylic board, medium density decorative board and other non-metal sheet precision cutting.

In recent years, with the wide application of laser engraving machines, the printing and packaging industry printing plates have also gradually applied laser engraving technology. The most common packaging in the printing and packaging industry is carton packaging.

When using a CO2 engraving machine to engrave wood, the engraving depth is generally required to be relatively deep, so the power is generally set to be relatively high. If you encounter hard wood it may make the engraved graphic presentation darker. If you want to make the color lighter, you can increase the engraving speed and try to engrave several times

The CO2 engraving machine can also engrave plywood, which is a man-made wooden board and one of the commonly used materials for furniture. Carving on plywood is actually not much different from carving on wood, but one thing to pay attention to is that the carving depth should not be too deep

The co2 engraving machine can be applied to logs, which are unprocessed wood. It is one of the most common laser processing materials in our daily life, and it is also easy to be engraved and cut. For example, light-colored woods such as birch, cherry or maple are easily vaporized by the laser and are more suitable for carving.
The machine can be used in wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper, leather, rubber, ceramic,glass and other nonmetal materials.

The application of co2 engraving machine can be found in almost every industry, and it has become a very common equipment in our daily work. Now, it is mainly used in advertising industry, craft industry, mould industry, construction industry, printing and packaging industry, wood industry, decoration industry, leather industry…

Laser engraving machine is a very mature professional technology at present, and the product has a high technical content of optical, mechanical and electrical integration. In the mid and late 1990s, with the successful research and development of laser engraving technology, the engraving industry began to develop rapidly and is now used in many industries.

Machine Parts
This machine is equipped with Control System for RDdraw directly,also supports CoreDraw and Auto CAD and other advance software.
Main Features
Air exhaust fan
Water cooling

High efficiency tube with stable laser path, make sure working steady.Three Mirror and one lens: high quality reflection mirrors and focus lens. High efficiency and stable performance.

Delta servo motors & drivers of the co2 laser cutting and engraving machine : Very quite and strong, Famous brand. Make sure fast cutting and engraving speed.

Control system of co2 laser cutting and engraving machine adopt China top brand Ruida control system, With LCD digital control panel, English version, easy to understand and easy to operate.