Hot Sale Wood Acrylic Laser Cutting Machine and Engraving

Using a stamp engraving machine can improve work efficiency and save work time. Compared with the traditional use of expensive handwork, the laser stamp engraving machine has higher engraving efficiency and lower cost, and is more suitable for mass production

Dowin laser engraving machine focuses on lenses, exquisite craftsmanship, ultra-high standard materials, and checks at every level to ensure that 100% of the products delivered to customers meet international standards, with better and faster cutting and engraving effects and higher cost performance.

The Dowin stepping motor adopts imported core components, and the raw materials have undergone strict testing and screening. The product materials are better, and the service life is longer, which can fully guarantee the long-term stable operation of the equipment using the stepping motor.

Rubber stamps should pay attention to clear and clear requirements after use:
(1) Cleaning the seal should remove oil, dirt, mildew and rust on the seal.
(2) After cleaning, the seal should be complete, clean, and not deformed, and the handwriting and pattern on the printed surface and the edge should be kept intact and clear.

3040 CO2 laser engraving machine is mainly used in wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics and glass, etc.
It is widely used in advertising, gifts, shoe materials, toys and other industries.
At the same time, CO2 laser engraving machine has a variety of image formats, such as HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI.

Dowin laser engraving machine rotating shaft, faster speed, wide application, simple operation, flexible use, energy saving and environmental protection, easy to clean.

DOWIN CO2 laser engraving and cutting machine has obvious advantages. The optimized design of the mechanical structure saves space, and the structure is not deformed, and the cutting precision is high. Taiwan imported square linear guide, long service life.
With automatic focus, red light positioning and other functions, the accuracy of the machine is improved and its functions are maximized. Able to work on most non-metallic materials, saving time and efficiency.

The CO2 laser engraving machine made by Dowin adopts reci laser tube, which has a fine spot, long life, good stability and fast engraving speed.

The advantages of carbon dioxide laser engraving machines when engraving objects are very obvious: low cost and not limited by the number of processing. For low volume machining services, laser machining is cheaper.
The materials that CO2 laser engraving machine can cut and engrave include wood, acrylic, paper, cloth, epoxy, plastic, rubber, crystal, etc.
3040 CO2 laser engraving and cutting machine is small in size and does not take up space, it is very suitable for DIY or home studio use

Applicable materials:
Non-metal materials such as double color board, acrylic glass, bamboo and wood, rubber, marble, granite and tiles, leather etc

Applicable industry:
Billboards, artistic gifts, crystal ornaments, paper-cut, bamboo and wooden product, garment and leather, embroidery, decoration and upholster industry etc.

Top Sales 6090 100W Co2 Laser Engraving and Cutting Machine Price
-High-end precision linear rails with ball bearings for fast, smooth motion
-Large working engraveable area of up to 35” x 24”
-Front pass through doors open for larger pieces to put into machine
-Motorized Z table, autofocus sensor, and visible red laser pointers are included
-Capable of cutting up to ½” thick acrylic and wood
-Can engrave bottles and round objects with the rotary attachment included

“对比深雕的传统方式，激光深雕印章具有无污染、精度高、雕刻内容灵活、可满足复杂雕刻工艺等优势。

”

The parameter of 1390 co2 laser cutting machine:
Model 1390A
Working Size 1300mm*900mm
Laser Type DC glass laser tube (Co2)
Wavelength 10.6um
Laser Power 60W,80W,130W,150W
Reposition Accuracy ≤±0.01mm
Cooling System Water cooling system
Control System Digital Offline control system

Laser engraving and processing of rubber requires relatively high laser power to achieve a certain level of production efficiency. The higher the laser power, the faster the laser engraving speed.

This Rubber self-inking stamp laser making engraving machine could both engraving and cutting one time to make a Rubber self-inking stamp, high precision and fast.
Main Technical Parameters of the rubber stamp laser making machine
Processing area DW-3040B
Laser tube 40W (60W option)
Engraving speed 0-300mm/s
Cutting speed 0-500mm/s
Resolution ratio <0.01mm Motor Step motors Voltage 110V±10%/ 220V±10% ,50HZ ~60HZ Minimum character Letter 1.0 x 1.0mm Laser tube's life 5000+ hours Control system Coreldraw (Ruida option) Working table Alumina and Honeycomb working table Graphic Format Supported PLT, DXF, AI, BMP, DST, etc. Cooling system Water pump Standard configurations Air compressor,exhaust fan, water pump , handle up-down included Options Chiller CW-3000,Ruida software,Bracket stand

The engraving depth of the stamp laser engraving machine is related to factors such as the absorption of the laser by the engraved material, the power of the laser, and the time of the laser on the engraved material. images, etc.

The feature of 3040 40w co2 laser engraving machine DIY
1)Perfectly tidy power supply system.The power supply system of the whole machine is strictly in accordance with international standards. Different control power signal lines adopt separate routing design, avoiding electromagnetic interference between various types of signal lines.

2)Adopt high-precision guide rails imported from South Korea.Improve laser engraving and cutting accuracy and ensure that the laser machine runs efficiently and stably for a long time.

3)5mm thick aluminum alloy oxidation work platform, to ensure the level of the work platform, improve the accuracy of object carving.

4)High precision drive motor.The X / Y axis uses a high-precision belt-driven Leadshine motor to improve response speed and cutting engraving accuracy.

5)The latest manual rotary lifting system is fast and stable.

6) Red dot positioning Synchronize with the laser, which make the operation more convenient.

When carrying out laser engraving, select the corresponding laser machine and power according to the material to be engraved. Generally speaking, CO2 laser engraving machine is selected for the engraving of non-metallic materials.
When engraving rubber stamps, choose a professional laser stamp engraving machine. The engraving accuracy is higher, the efficiency is faster, and it is more suitable for fine engraving.

Engrave stamps with a laser stamp engraver to laser engrave a large number of personalized stamps in minutes. The engraving in the mass production of stamp writing boards has also been significantly simplified and accelerated.
How to choose a stamp engraving machine is a problem encountered by many customers at present
The general seal laser engraving machine is small in size, light in weight and easy to move.
DOWIN laser stamp engraving machine is a machine specially designed for laser engraving, with high engraving precision and flexibility

Rubber stamps are generally engraved by hand or laser engraved, and most of the stamps are now engraved by laser stamp engraving machines.
The stamp engraved by the laser stamp engraving machine is more fine and suitable for the engraving of complex patterns. Compared with traditional manual engraving, laser stamp engraving machine has higher precision and higher efficiency.

The package content of stamp making machine,
Laser engraving software package (English Version)
User manual (CD)
Water pump
Air exhaust fan
Air pump
Communication cable
3 Reflect optics (installed in the machine)
1 Focus optics (installed in the machine)
1 Laser tube

To understand the difference between ordinary engraving machines and laser engraving machines, we must first understand what are ordinary engraving machines and laser engraving machines. Ordinary engraving machine refers to the equipment that uses the tool on the engraving machine to cut and engrave materials; laser engraving machine refers to the equipment that uses the melting, evaporation and photochemical reactions generated by the laser beam on the surface of the material to make the surface of the material turbid and achieve the desired pattern.

Application and sample of Co2 laser engraving cutting machine:
1. The 1390 co2 laser cutter engraving machine co2 can engrave wood, bamboo, Ivory, bone, rubber, leather, marble, shell and cut paper, acrylic, felt etc.
2.Mainly used in large plastic character cutting, color plate engraving, organic glass engraving and cutting, sign engraving, crystal engraving, trophy engraving etc.
3.Leather Clothing Processing Industry: engraving and cutting complex patterns on genuine leather, synthetic leather, leather, woolens, clothing, furnishings, glove, handbag, shoes, hats, toys, etc.

CO2 engraving machines are very widely used in the leather industry. The use of laser cutting machines breaks the problems of traditional manual and electric shears, such as slow speed, difficult typesetting, low efficiency and serious material waste. It is fast and easy to operate
Applicable industries:
advertisement, arts and crafts, leather, toys, garments, model , building upholster, computerized embroidery and clipping, packaging and paper industry.

The Motor and Driver of 1325 laser cutting machine.
Dowin all co2 laser cutting machine use famous brand Leashine motor and driver with high quality.
And if the cusotmers want to custom the machine , Dowin also can produce laser macine to the cusotmers’ need!

Co2 1390 CNC Laser Cutting Edge Features:

ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to around 8cm or be fully retracted, allowing more control over different focal distance setups.
AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise.
Front REAR PASS THROUGH: There’s always extra room! And it can accommodate materials larger than the workbed size.
BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine.

When using the rubber laser engraving machine, pay attention to the maintenance of the laser head. The laser head is the main tool for work. In order to prolong the life of the laser head, our small engraving machine should try to rest for about 10-15 minutes after engraving for 50 minutes.

The advantages of DW-6040 Laser engraving cutting:
1.It can great control over beam intensity, length and heat output,
2.It uses an extremely low level of power consumption,
3.It can work with a huge range of materials.

Dowin 1390 Co2 laser cutting machine factory.
*Famous brand CO2 laser tube
*Laser head with auto focus pen
*High precision HIWIN guide rail
*Leadshine 3 phase 57 motors
*Leadshine drivers
*Moving platform controlled by software
*Ruida 6445 software
*S&A brand CW-5200 water chiller
*Double smoke cleaning system
*550W exhaust fan
*008 air pump

The cost of a rubber stamp laser engraving machine is lower than that of traditional hand engraving. The laser seal engraving machine has fine engraving, stable work efficiency, and will not be affected by other factors. The engraving speed is fast, and the cost of mass production using a laser rubber engraving machine is lower than manual engraving.

The parameter of 1390 co2 laser cutting machine:
Model 1390A
Working Size 1300mm*900mm
Laser Type DC glass laser tube (Co2)
Wavelength 10.6um
Laser Power 60W,80W,130W,150W
Reposition Accuracy ≤±0.01mm
Cooling System Water cooling system
Control System Digital Offline control system

1390 Laser engraving cutting machine is generally used in wood products, plexiglass, stone, crystal, Corinne, paper, two-color plate, alumina, leather, resin and so on.

Co2 1390 CNC Laser Cutting Edge Features:

ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to around 8cm or be fully retracted, allowing more control over different focal distance setups.
AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise.
Front REAR PASS THROUGH: There’s always extra room! And it can accommodate materials larger than the workbed size.
BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine.

The stamp laser engraving machine can engrave stamps of non-metallic materials, such as wood stamps, rubber stamps, crystal stamps, etc.

At present, the commonly used seals on the market include stone seals, jade seals, and rubber seals. In recent years, the demand for rubber seals is increasing, and the engraving demand for rubber seals is increasing day by day. It is particularly important to have a professional seal engraving machine.

The Co2 laser is a gas molecular laser, the working substance is CO2 gas, and the auxiliary gas is nitrogen, helium, xenon and hydrogen. Since the energy conversion efficiency of this laser is as high as 25%, it is often used as a laser with high power output. The wavelength of carbon dioxide laser is 10.6 microns. It is impossible to see infrared light, has good stability, and is widely used.

Co2 Laser engraving machine well work for all non-metal material such as wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper, leather, rubber, ceramic, glass, etc.

The DOWIN black series CO2 laser power supply is currently the most widely used and widely used laser power supply. It has been sold well at home and abroad for more than ten years. It has strong versatility, good compatibility and high security.

Dowin 3040 60W min co2 laser engraving machine laser cutter
1)Perfectly tidy power supply system.The power supply system of the whole machine is strictly in accordance with international standards. Different control power signal lines adopt separate routing design, avoiding electromagnetic interference between various types of signal lines.

2)Adopt high-precision guide rails imported from South Korea.Improve laser engraving and cutting accuracy and ensure that the laser machine runs efficiently and stably for a long time.

3)5mm thick aluminum alloy oxidation work platform, to ensure the level of the work platform, improve the accuracy of object carving.

4)High precision drive motor.The X / Y axis uses a high-precision belt-driven Leadshine motor to improve response speed and cutting engraving accuracy.

5)The latest manual rotary lifting system is fast and stable.

6) Red dot positioning Synchronize with the laser, which make the operation more convenient.

Advantages and disadvantages of traditional mechanical processing seals: traditional process applications such as machining for engraving depth, the waste and coolant generated will also cause environmental pollution. Although the efficiency is improved, the accuracy is not high, and sharp angles cannot be engraved.
Laser stamp engraving machine can overcome this shortcoming

CO2 Laser Engraving & Cutting Machine is a laser engraving machine system equipped with CO2 laser tube for engraving on materials such as wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics and glass.
The main application industries are advertising, gifts, shoe materials, toys, etc.
CO2 laser engraving and cutting machines generally support various graphic formats such as HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI, etc., which are convenient for engraving and cutting work.

The principle of laser engraving is that the laser beam is transmitted and focused on the surface of the material by the optical mechanism, and the material at the action point of the high-energy density laser beam is rapidly vaporized to form pits.
Mainly used in the engraving and cutting of non-metallic materials, such as wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper

6090 Co2 laser engraving machine can be used to engrave and cut non-metallic materials. According to different materials and thickness, we sell DW-6090 with different powers: 60W, 80W, 100W, 130W and 150W. You can also choose different accessories, such as water cooler chiller, standard rotation and simple rotation.

1390 Co2 laser cutting engraving machine ,Laser Tube Lifetime:
More than 80W CO2 laser tube with an estimated lifetime of up to 5,000 operation hours depending on power setting usage and water cooling performance
PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime.

The application of co2 engraving machine can be found in almost every industry, and it has become a very common equipment in our daily work. Now, it is mainly used in advertising industry, craft industry, mould industry, construction industry, printing and packaging industry, wood industry, decoration industry, leather industry…

The CO2 laser engraving machine has obvious advantages in processing:
1. Energy saving and environmental protection: the diameter of the beam and the spot is small, generally less than 0.5mm; the cutting process saves materials and is safe and hygienic;
2. Consistent effect: ensure that the processing effect of the same batch is completely consistent.
3. High-speed and fast: high-speed engraving and cutting can be performed immediately according to the pattern output by the computer.

Rubber stamp Application
Dowin professional seal stamp engraving machine uses high-precision guide rails imported from South Korea selected by Dowin’s professional stamp engraving machine ensure stable mechanical structure and high precision, so the engraved ink storage pad stamp surface is relatively flat, the stamping force is relatively uniform, and there will be no “light printing color in the middle”. , the phenomenon of squeezing ink around the thick “.
The laser spot of Dowin laser tube is thin and the light output is stable, which ensures that the engraving will not have jaggedness, no hair on the edge, and round and blunt corners.
The software is convenient and the engraving and cutting can be completed at one time.

The Machine Features of 100W Laser Cutter:
-Leadshine drive system with high precision, strong shock absorption ability and small noise.
-Red cross laser position, conveniently and quickly engraving and cutting position.
-Equipment with automatic focused laser head, responsive andaccurate to ensure sculpture quality.

6040 engraving machine can cut any complex shape; high efficiency, low cost, computer design graphics, can cut any shape and size of lace. Fast development speed: Due to the combination of laser and computer technology, users can realize laser engraving output as long as they design on the computer. The machine engraving accuracy and cutting speed are very good, and it also has the characteristics of safe operation and simple maintenance.

1390 Co2 laser cutting machine is widely used in electronic, craft and gift, garment, leather, toy, computerized embroidery, packing and printing, shoe making, furniture, advertising industries ect.
Application:
1) Acrylic engraving and cutting
2) Wood/MDF engraving and cutting
3) Leather engraving and cutting
4)Paper engraving and cutting
5) Rubber sheet engraving and cutting
6) Double color board & coated board engraving
7) Marble and stone engraving

Main configuration:
*Famous brand CO2 laser tube
*Laser head with auto focus pen
*High precision HIWIN guide rail
*Leadshine 3 phase 57 motors
*Leadshine drivers
*Moving platform controlled by software
*Ruida 6445 software
*S&A brand CW-5200 water chiller
*Double smoke cleaning system
*550W exhaust fan
*008 air pump

Dowin 1390 Co2 laser cutting machine factory.
*Famous brand CO2 laser tube
*Laser head with auto focus pen
*High precision HIWIN guide rail
*Leadshine 3 phase 57 motors
*Leadshine drivers
*Moving platform controlled by software
*Ruida 6445 software
*S&A brand CW-5200 water chiller
*Double smoke cleaning system
*550W exhaust fan
*008 air pump

The main features of 1390 laser cutting machine :
The unique decelerate design make the mechanical system move stably and smoothly. The edge of cutting is smooth and there is no sawtooth. The software adopts conyinuous curve method to get faster cutting speed

Dowin laser stamp engraving machine is small in size and easy to carry. It can easily engrave on rubber, paper, wood and other materials. It has a lifting function and can meet various needs of customers.

Compared with traditional processing technology, laser rubber seal engraving machine has obvious advantages. Laser cutting combines a high concentration of energy and pressure, enabling stamp engravers to cut smaller and narrower areas of material for engraving

The Dowin laser seal engraving machine is specially designed for engraving seals. The system and configuration of the laser engraving machine are converted into seal engraving design. The engraving accuracy and engraving effect are good, which can meet the various needs of customers.

Rubber stamps engraved with a small laser engraving machine have more flexible patterns and can engrave complex patterns.
Laser stamp engraving machine has high working efficiency and low cost

1325 Co2 laser cutting engraving machine is widely used in electronic, craft and gift, garment, leather, toy, computerized embroidery, packing and printing, shoe making, furniture, advertising industries ect.
Application:
1) Acrylic engraving and cutting
2) Wood/MDF engraving and cutting
3) Leather engraving and cutting
4)Paper engraving and cutting
5) Rubber sheet engraving and cutting
6) Double color board & coated board engraving
7) Marble and stone engraving

The principle of laser engraving is that the laser beam is transmitted and focused on the surface of the material by the optical mechanism, and the material at the point of action of the laser beam with high energy density is rapidly vaporized to form pits. Use the computer to control the xy console to drive the laser head to move and control the laser switch as required. The image information processed by the software has been stored in the computer in a certain way. When the information is read from the computer in sequence, the laser head will move along the The scanning track is scanned back and forth line by line from left to right and top to bottom. Whenever a “1” point is scanned, the laser is turned on, and when a “0” point is scanned, the laser is turned off. The computer stores information in binary, which coincides with the two states of the laser switch.

The principle of laser engraving handicrafts refers to the use of high-energy conspiracy laser beams projected onto the surface of the material, so that the surface of the material can undergo physical and chemical changes, so as to obtain engraving handicrafts with visible patterns.
The engraving machine canbe used in crafts, models, advertising, decoration, electrical appliances, plastic industry acrylic board, medium density decorative board and other non-metal sheet precision cutting.