Stamp 3040 Laser Engraver Price CO2 Rubber Engraving Machine

Now the seal has penetrated into all aspects of our current food, clothing and use. The traditional engraving method is labor-intensive and low-efficiency. It can be easily engraved by laser seal engraving machine processing, which can fully meet the needs of fine processing of seal engraving.

The advantages of DW-6040 Laser engraving cutting:
1.It can great control over beam intensity, length and heat output,
2.It uses an extremely low level of power consumption,
3.It can work with a huge range of materials.

The Dowin Acrylic Laser Cutting Machine Application:
It is widely used in electronic, craft and gift, garment, leather, toy, computerized embroidery, packing and printing, shoe making, furniture, advertising industries ect.
Application:
1) Acrylic engraving and cutting
2) Wood/MDF engraving and cutting
3) Leather engraving and cutting
4)Paper engraving and cutting
5) Rubber sheet engraving and cutting
6) Double color board & coated board engraving
7) Marble and stone engraving

When using a laser seal engraving machine, after engraving the seal, it is necessary to clean the seal to ensure that the seal is clean.
You can usually clean or scrub the stamp with detergent

Laser engraving machines can be subdivided into non-metallic laser engraving machines, such as wooden handicraft engraving machines, stone shadow engraving machines, etc.
The 6040 laser engraving machine is mainly used to engrave and cut non-metallic materials, such as wood, acrylic, stone and so on.

Model: Laser Cutting And Engraving Machine
Laser Power:60W/80W/100W/130W/150W
Engraving Area:1300*900mm
Engraving Speed:1000mm/s
Cutting Speed:600mm/s
Repeating Location Accuracy:±0.0125mm
Working Voltage:100/220V ±10% 50HZ/60HZ

Maintenance of rubber stamp laser engraving machine accessories: tighten the screws.
After the motion system works for a certain period of time, the screws at the motion connection will become loose, and the loosening of the screws will affect the stability of the mechanical movement. Maintenance method: Use the supplied tools to tighten the screws one by one.

The progressive motor driver is an important part of the progressive motor of the laser engraving machine. Common faults and solutions are what we should understand.

Co2 laser cutting machine 6090 1390 applied to cutting trademark, woven label, garment leather, clothing toys, computer embroidery cutting , template and paper goods cutting. Applicable materials: leather, fabric, rubber, bamboo and wood, bag and shoes, garment and toys cutting and engraver.

Advantages of Dowin co2 laser engraving:
1. Saving environmental protection: the diameter of light beam and spot is small, generally less than 0.5mm; cutting and
processing saves materials, safety and health;
2. Consistent effect: ensure that the processing effect of the same batch is completely consistent.
3. High speed and fast: high speed carving and cutting can be carried out immediately according to the drawings output by the computer.

Dowin adopts ZnSe focusing lens for CO2 laser engraving machine, which has better focusing effect, scratch resistance and long service life.

High Precision130W Lazer Engraving Machine Wood Co2 CNC Laser Cutting Machine can automatically adjust the working table to satisfy the demands of cutting different thicknesses materials. The lifting height can reach 35cm.

1390 laser cutter optional parts:
1. Motorized up-down table.
To increase virtual working distance of Z. For thick materials and rotary attachment.
2. Rotary
Used to engrave round materials, such as bottles.
3. Red dot
For finding the light
4. Auto focusing
Machine adjusts the focal length automatically before engraving and cutting, which replaces manual focusing, improving working efficiency.

The laser engraving and cutting machine uses a focused high-power density laser beam to irradiate the workpiece to rapidly melt, vaporize, ablate or reach the ignition point of the irradiated material, and then use the coaxial high-pressure gas or the generated metal vapor pressure to melt the material. Blow off, with the relative linear movement of the beam and the material, the hole is continuously formed into a very narrow slit, thus completing the cutting

When using a CO2 engraving machine to engrave wood, the engraving depth is generally required to be relatively deep, so the power is generally set to be relatively high. If you encounter hard wood it may make the engraved graphic presentation darker. If you want to make the color lighter, you can increase the engraving speed and try to engrave several times

The 6040 laser engraving machine is widely used, and it is commonly used in the advertising industry and the clothing industry. The advantage of laser processing is that it can quickly engrave and hollow out various patterns on the surface of various upper materials. Since laser processing is a non-contact processing method, it will not produce any external deformation on the upper. It also has many advantages such as high engraving precision, hollow without burrs, and can process any shape.

CO2 laser engravers are very good at cutting and engraving non-metallic materials, the materials that can be cut and engraved include:
wood, acrylic, paper, cloth, epoxy resin, plastic, rubber, crystal, etc.
CO2 laser cutting machines are widely used in clothing, leather, cloth toys, computer embroidery and cutting, electronic appliances, models, handicrafts, advertising and other industries, as well as decoration, packaging and printing, paper products and other industries.

The Applicable Industries of 100W Laser Cutter:
Rubber,plastic,cloth toys,leather ,computer embroidery cutting, mould, crafts ,bamboo and wood, advertising and building decoration ,packaging and printing ,paper products.

CO2 engraving machine is very efficient. The CO2 engraving machine has no “knife marks” during use, and does not damage the surface of the workpiece

1.DW-1390 CO2 laser engraving machine, able to engrave and cut various non-metals, like acrylic, double-color plate, marble, wood, MDF, plywood, textile, leather, glass, paper etc.

2.Widely applied in craft gifts, souvenir, Chinese paper cutting, advertising signs, clothes, furniture and many other industries.

3.Fast engraving and cutting speed, high precision. Can be configured with up-down lifting table, honeycomb table, rotary, etc.

4.Machine working size can be selected according to your needs.we have 600x400mm, 900x600mm, 1300x900mm, 1400x900mm, 1600x1000mm, 1300x2500mm, and so on.

Parameters of laser rubber stamp engraving machine:
Working area: 300mm x 400mm

Laser power: 40w/50w/60w
Laser type: CO2 sealed laser tube, water cooled

Dowin stepper motor driver adopts new DSP technology, ultra-low vibration and noise, built-in high subdivision, automatic parameter tuning, automatic halving of current when stationary, and precise current control to reduce motor heating.

The Motor and Driver of 1325 laser cutting machine.
Dowin all co2 laser cutting machine use famous brand Leashine motor and driver with high quality.
And if the cusotmers want to custom the machine , Dowin also can produce laser macine to the cusotmers’ need!

It is widely used in electronic, craft and gift, garment, leather, toy, computerized embroidery, packing and printing, shoe making, furniture, advertising industries ect.
Application:
1) Acrylic engraving and cutting
2) Wood/MDF engraving and cutting
3) Leather engraving and cutting
4)Paper engraving and cutting
5) Rubber sheet engraving and cutting
6) Double color board & coated board engraving
7) Marble and stone engraving

Main Features of Dowin dw-1390 laser engraving machine
80W CO2 LASER ENGRAVING MACHINE ENGRAVER
Control system:Ruida software(Lightburn supported)
Working size:130×90cm
Laser tube type: Co2 Glass sealed laser tube
Laser power: 80W/100W/130W/150W/180W…
Driver type: Leadshine Stepping Motor

The DOWIN black series CO2 laser power supply is currently the most widely used and widely used laser power supply. It has been sold well at home and abroad for more than ten years. It has strong versatility, good compatibility and high security.

The lens of Dowin laser engraving machine has stable focusing, accurate and reliable focusing, better cutting and engraving effect, can withstand high power, and the surface film is firm, not easy to fall off, and resistant to friction.

Compared with the traditional manual engraving, the laser rubber engraving machine has a faster engraving speed, and the engraving effect is also very delicate, which is no less than the manual engraving process. The laser rubber engraving machine gradually replaces the traditional manual engraving, and the proportion in the market increases

The Application of stone laser engraving machine:
It is widely used in cutting, engraving, through-carved, hole drilling on fabric, garment, leather, wood and bamboo, acrylic, craft and gift, marble and granite, ceramic, glass and other non-metal materials. Mainly applicable for engraving for heavy materials, such as gravestone, granite, marble etc.

Stone Laser engraving Machine
Model:DW-6090/DW-1390
Working area:130cm*90cm
Laser power:80W-150W
Laser type:CWG CO2 laser tube,water-cooled
Engraving speed:0-60000mm/min
Laser Output:1-100%software setting
Resetting positioning accuracy:≤±0.01mm
Power supply:220V/50HZ , 110V/60HZ
Operating temperature:0 – 45°C
Operating humidity:5 – 95%
Min. shaping character:English 1.0 x 1.0mm
Graphic format supported:BMP, PLT, DST, DXF, AI
Software supported:Ruida, PhotoShop, Lightburn
Driving system：Leadshine 57 stepper motor

The principle of laser engraving is that the laser beam is transmitted and focused on the surface of the material by the optical mechanism, and the material at the action point of the high-energy density laser beam is rapidly vaporized to form pits.
Mainly used in the engraving and cutting of non-metallic materials, such as wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper

Machine Features
✦Drive system with high precision linear guide and slide block, high precision ,wearresistance, small resistance, high
speed;arc-gear synchronous belt 3m,stabletransmission, strong shock absorption ability and small noise.
✦Red cross accurate position, convenient and quick in finding engraving and cutting position.
✦Equipment with automatic / manual modulation focused laser head, responsive andaccurate to ensure sculpture quality.

The package content of stamp making machine,
Laser engraving software package (English Version)
User manual (CD)
Water pump
Air exhaust fan
Air pump
Communication cable
3 Reflect optics (installed in the machine)
1 Focus optics (installed in the machine)
1 Laser tube

Compared with the traditional manual engraving method, laser engraving can also make the engraving effect very delicate, which is no less than the craftsmanship level of manual engraving. It is precisely because the laser engraving machine has so many advantages that the application of the laser engraving machine has gradually replaced the traditional engraving equipment and methods, and has become the main engraving equipment.

The light sensor switch used in the co2 laser engraving machine manufactured by Dowin has fast response, sensitive induction, strong anti-interference, excellent wire, multiple protection, and stable performance, just to bring you the best experience.

The DOWIN black series CO2 laser power supply is currently the most widely used and widely used laser power supply. It has been sold well at home and abroad for more than ten years. It has strong versatility, good compatibility and high security.

CO2 laser engraving and cutting machine is extremely high and responsive, the main machine features
①The drive system adopts high-precision linear guides and sliders, with high precision, wear resistance, low resistance and fast speed; stable transmission, strong shock absorption ability and low noise.
②The positioning of the red light is accurate, and it is convenient and quick to locate the engraving and cutting position.
③The laser head is sensitive and accurate to ensure the quality of engraving.

1)Red dot positioning Synchronize with the laser, which make the operation more convenient.
2)Ensure the accuracy higher than similar models on the market.
3) Knives and cellular dual cutting platform can meet the cut requirement of a variety of products.
4)DSP control system and Ruida board can ensure the engraving and cutting task completed quickly at one time.
5)Make the processing of various thickness material more convenient.
6)Wide range of applications: Advertising industry, Office industry, Packing industry, Gift industry, Decoration industry, Printing Industry.

The main feature of stamp engraving machine:
1.Laser tube, include 50w ,60w,80w,100w. It is CO2 Laser glass tube.
2.Linear guideway or round guideway
3.Work plate: honeycomb plate or blade
4.English Panel: can customize according to clients’ request.

Co2 1390 CNC Laser Cutting Edge Features:
EXHUAST FAN: It can expel smoke and fumes to create a safer workspace and extend the service life of your machine.
WATER COOLING SYSTEM: Installed CW5200 water chiller to ensure tube cool down in time ,although for a long working time, the machine also can work smoothly.
WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube.

6090 Co2 laser cutting and engraving machine is for cutting or engraving wood, bamboo, jade, marble, glass, crystal, plastic, textiles, paper, leather, rubber, ceramic, and other non-metal materials.

Stone Laser engraving Machine
Model:DW-6090/DW-1390
Working area:130cm*90cm
Laser power:80W-150W
Laser type:CWG CO2 laser tube,water-cooled
Engraving speed:0-60000mm/min
Laser Output:1-100%software setting
Resetting positioning accuracy:≤±0.01mm
Power supply:220V/50HZ , 110V/60HZ
Operating temperature:0 – 45°C
Operating humidity:5 – 95%
Min. shaping character:English 1.0 x 1.0mm
Graphic format supported:BMP, PLT, DST, DXF, AI
Software supported:Ruida, PhotoShop, Lightburn
Driving system：Leadshine 57 stepper motor

Maintenance of rubber stamp laser engraving machine accessories: tighten the screws.
After the motion system works for a certain period of time, the screws at the motion connection will become loose, and the loosening of the screws will affect the stability of the mechanical movement. Maintenance method: Use the supplied tools to tighten the screws one by one.

The laser engraving machine uses the thermal energy of the laser to engrave the material, and the laser in the laser engraving machine is its core. Generally speaking, laser engraving machines are used in a wider range, with higher engraving precision and faster engraving speed. Moreover, compared with the traditional manual engraving method, laser engraving can also make the engraving effect very delicate, which is no less than the craftsmanship level of manual engraving.

The Dowin stepping motor adopts imported core components, and the raw materials have undergone strict testing and screening. The product materials are better, and the service life is longer, which can fully guarantee the long-term stable operation of the equipment using the stepping motor.

The Advantages of co2 laser engraving cutting machine:
1. Saving and environmental protection: the diameter of the beam and the spot is small, generally less than 0.5mm; the cutting process saves materials, and is safe and hygienic;

2. Consistent effect: ensure that the processing effect of the same batch is completely consistent.

3. High-speed and fast: high-speed engraving and cutting can be performed immediately according to the pattern output by the computer.

4. Low cost: not limited by the number of processing, for small batch processing services, laser processing is cheaper.

Our DW-1390 laser machine can be installed with a 130 Watt CO2 laser tube. Our 130 Watt tube can cut up to 3/4″ hard wood and 1″ acrylics. This DW-1390 laser machine comes with a steel honeycomb cutting bed, exhaust fan, air assist compressor, full technical support for the life of your machine. We also offer optional personalized training, in which our staff makes sure you know how to use and maintain your laser machine.

Now seal engraving generally uses materials such as hard glue and rubber as the bottom surface of the seal. Using a small laser engraving machine to engrave the pattern of the seal greatly improves the production efficiency and reduces the production cost.

In addition to engraving seals, the professional seal engraving machine can also engrave leather pads, leather knife holsters or stainless steel thermos cup sleeves. The engraved patterns are fine and the text is clear.

The advantages of co2 laser engraving machine processing:
1. Wide range: carbon dioxide laser can engrave and cut almost any non-metallic material. And it’s cheap!
2. Safe and reliable: non-contact processing will not cause mechanical extrusion or mechanical stress to the material. No “knife marks”, no damage to the surface of the workpiece; no deformation of the material;
3. Precise and meticulous: the machining accuracy can reach 0.02mm

The CO2 laser engraving machine produced by Dowin adopts S&A water cooling machine:
• Provide stable working conditions for laser equipment.
• Water can be used for a long time.
• High heat dissipation capacity, not easy to block.
• Alarm output port can quickly protect sensitive components

Co2 laser cutting machine DW-1390 is a kind of laser engraving cutting machine system equipped with Co2 laser tube,it is used to engrave on acrylic, PVC, rubber sheet, plastic, crystal, glass, wood, bamboo, oxhorn, figuline,marble, leather, cloth, double-color board, etc. nonmetal materials .

The stamp laser engraving machine can make the engraved surface more round and smooth, and can greatly improve the engraving efficiency. The stamp laser engraving machine can quickly reduce the surface temperature of the engraved object and avoid its deformation. It is specially used for stamp engraving.

To understand the difference between ordinary engraving machines and laser engraving machines, we must first understand what are ordinary engraving machines and laser engraving machines. Ordinary engraving machine refers to the equipment that uses the tool on the engraving machine to cut and engrave materials; laser engraving machine refers to the equipment that uses the melting, evaporation and photochemical reactions generated by the laser beam on the surface of the material to make the surface of the material turbid and achieve the desired pattern.

Dowin laser stamp engraving machine is small in size and easy to carry. It can easily engrave on rubber, paper, wood and other materials. It has a lifting function and can meet various needs of customers.

Both laser engraving machine and CNC engraving machine are controlled by computer numerical control system. First design the engraving file, then open the file through the software, start the CNC programming, after the control system receives the control command, the engraving machine starts to work
The laser engraving and cutting machine adopts the non-contact processing method, and the mechanical engraving machine belongs to the contact processing, and the workpiece needs to be fixed.

Dowin laser is China laser machine manufacturer supply Trophy Medal Logo Engraving Laser Trophies Cup Engraving Machine Cnc Laser Engraver
Laser engraving machine is perfect for engraving a wide variety of trophies, plaques, medals, awards and more. Our machines go through a strict quality control process so you know every engraved, marked, routed or cut item using the proper tools & setting will exude the same quality. We have a variety of systems that can handle flat, curved, odd-shaped, and cylindrical items in a wide range of materials. Our laser engraving machine offer the flexibility, capability and quality you need for all your awards engraving needs.

The Co2 laser is a gas molecular laser, the working substance is CO2 gas, and the auxiliary gas is nitrogen, helium, xenon and hydrogen. Since the energy conversion efficiency of this laser is as high as 25%, it is often used as a laser with high power output. The wavelength of carbon dioxide laser is 10.6 microns. It is impossible to see infrared light, has good stability, and is widely used.

As a professional laser factory,and we are always upgrading our machines,
for now, the configuration of our 1390 co2 laser cutting engraving machine:
-130*90cm working size
-CW5200 water chiller with S&A brand
-Famous HIWIN square rail from Taiwan
-CWG laser tube
-Ball screw electrical moving table controlled by softeware
-Leadshine 57 3DM5800S motor and driver
-Ruida 6445 (work with Lightburn)
-ACO008 air pump and 550w exhaust fan
-Double exhaust pipes
If you have any questions about laser machine,please contact with DOWIN laser.

When making the stamp face, make sure that the design file has been mirrored, otherwise the imprint of the stamp will not be able to be read normally. Using a professional seal engraving machine can maximize the efficiency of seal engraving