3040 Best Quality Wood Acrylic Engraver Laser Engraving Machine

Dowin 1390 co2 laser engraving machine is suitable for cutting and engraving most non-metallic materials, such as paper packaging, plastic products, label paper, leather cloth, glass ceramics, resin plastics, bamboo and wood products, PCB boards, etc.

The laser cutting and engraving machine can work on crylic, plywood, wood, leather, cloth, plastic, glass(engraving only), double layer plastic, maylar, pet film and so on
nonmetal materials, if metal with coating or Alumina also can be engraved.

About Dowin machine warranty:

No need to worry! We offer a 12-months parts warranty on all machines.
12-month warranty on laser tube and laser power supplies 80W and upper

Dowin adopts ZnSe focusing lens for CO2 laser engraving machine, which has better focusing effect, scratch resistance and long service life.

The cover of the CO2 engraving machine adopts a translucent design, which can see the specific situation of the work, and it is easier to control the effect of the work.

Features of the engraving machine
Air assist,remove heat and combustible gases from the cutting surface.
Intuitive control panel, set speed, power and more controls directly from the laser

When using a laser seal engraving machine, after engraving the seal, it is necessary to clean the seal to ensure that the seal is clean.
You can usually clean or scrub the stamp with detergent

Our DW-1390 laser machine can be installed with a 130 Watt CO2 laser tube. Our 130 Watt tube can cut up to 3/4″ hard wood and 1″ acrylics. This DW-1390 laser machine comes with a steel honeycomb cutting bed, exhaust fan, air assist compressor, full technical support for the life of your machine. We also offer optional personalized training, in which our staff makes sure you know how to use and maintain your laser machine.

Laser engraving is to use the computer to control the x-y console to drive the laser head to move and control the switch of the laser as required. The image information processed by the software has been stored in the computer in a certain way. When the information is read from the computer in sequence, The laser head scans back and forth line by line from left to right and top to bottom along the scanning track.
The 3040 laser engraver meets the engraving needs of most materials

Laser engraving seals have more advantages in terms of work efficiency and production cost. The traditional corrosion process will not only bring environmental pollution, but also lower efficiency. Machining and other traditional process applications for engraving depth, the generated waste and coolant will also cause environmental pollution. Although the efficiency is improved, the accuracy is not high, and sharp angles cannot be engraved.

1390 Co2 laser cutter
—Applicable industries
Advertisement, arts and crafts, leather, toys, garments, model , building upholster, computerized embroidery and clipping, packaging and paper industry.

Now seal engraving generally uses materials such as hard glue and rubber as the bottom surface of the seal. Using a small laser engraving machine to engrave the pattern of the seal greatly improves the production efficiency and reduces the production cost.

Dowin products are of reliable quality, attention to detail and after-sales service. The hardware accessories of the laser engraving machine are made of high-quality materials, which are durable and not afraid of deformation. Multi-layer electroplating coating, corrosion-resistant and not fading, often maintains luster.

Laser engraving and processing of rubber requires relatively high laser power to achieve a certain level of production efficiency. The higher the laser power, the faster the laser engraving speed.

The advantages of DW-6040 Laser engraving cutting:
It is a non-contact process.This reduces heat damage to the surrounding area, which increases productivity by decreasing downtime and repair costs

Co2 laser cutting machine 6090 1390 applied to cutting trademark, woven label, garment leather, clothing toys, computer embroidery cutting , template and paper goods cutting. Applicable materials: leather, fabric, rubber, bamboo and wood, bag and shoes, garment and toys cutting and engraver.

The CO2 engraving machine can also engrave plywood, which is a man-made wooden board and one of the commonly used materials for furniture. Carving on plywood is actually not much different from carving on wood, but one thing to pay attention to is that the carving depth should not be too deep

Dowin laser engraving machine 6040, the red dot positioning is synchronized with the laser, and the operation is more convenient. Guaranteed accuracy is higher than similar models in the market. The knife and honeycomb double cutting platform can meet the cutting requirements of various products. DSP control system and Ritar board can ensure that engraving and cutting can be completed quickly at one time.

Dowin laser machines suitable material
Wood products, paper, leather, cloth, plexiglass, epoxy resin, acrylic, wool, plastic, rubber, ceramic tile, crystal, jade, bamboo products and other non-metallic materials.
High-power CO2 lasers can also cut metal materials.

1390A model Co2 laser engraving&cutting machine
Model: DW-1390A
Working Area: 1300mm*900mm
Speed: 0-1200 mm/s
Drive: Stepper Motor
weight: 450kgs

Using laser engraving can improve the efficiency of glass engraving, make the surface of the engraved place smooth and round, quickly reduce the temperature of the engraved glass, and reduce the deformation and internal stress of the glass. Even if the glass object is cylindrical, it can still be engraved by using the rotary attachment. Laser machines are ideal for processing and creating beautiful glass designs because they are less expensive, more flexible, faster and easier to operate.
● Personal Engraving ● Promotional Materials ● Optical ● Decorations ● Gifts ● Interior Design ● Bottomless Drinking Cups ● Mirrors

1390 Co2 laser cutting machine Advantages
1. Equipped with the protection cover, it not only guarantees the personal safety of the operator, and also makes the entire processing production more environmentally friendly.
2. Adopting the imported laser head, it has the advantages of high processing accuracy, high speed and low noise.
3. With a wide range of applications, it widely used in advertising industry handicraft production, decoration, rubber plate furniture and other industries.
4. With High processing accuracy and the processing accuracy can reach 0.02 mm.

Application:
Laser processing can be carried out on bamboo, crystal, horn, paper plate, plexiglass, marble, cloth, leather, rubber, plastic and
other non-metallic materials.Clothing, embroidery, cloth toys, home decoration cloth, handbags, gloves, toy industry leather, leather cutting and surface carving.
3）

How to use the stamp engraving machine
First check whether the laser tube is damaged or not and whether the parts are loose.
Install the exhaust device, connect the exhaust pipe to the exhaust fan, and install the other end outdoors.

The co2 laser engraving machine is an engraving machine using co2 laser technology. This type of laser equipment is a general-purpose model with a rear focus method, small size and high degree of integration.
The laser beam is transmitted and focused on the surface of the material by the optical mechanism, and the material at the action point of the high-energy density laser beam is rapidly vaporized to form pit points, thereby realizing engraving and cutting.

When using laser rubber stamp engraving, it should be noted that only materials within the specified range can be processed. Do not place other irrelevant sundries on the table, and the table needs to be cleaned in time.

The laser cutting and engraving machine has the linear guide, high positioning accuracy, long service life, low coefficient of fricition and low noise

Welcome to Dowin factory , here are the most cost – effective Co2 laser cutting engraving machine , we manufactuer all kinds of Co2 laser cutting machine , all working size is all available , you can also choose different area of table , open type single table or double auto exchangeble table ,with or without protective cover ,we could customize all of these as you request .

The machine has a removable basement, start engraving anytime, anywhere. And the machine has the system of auto focusing.

Maintenance of rubber stamp laser engraving machine accessories: tighten the screws.
After the motion system works for a certain period of time, the screws at the motion connection will become loose, and the loosening of the screws will affect the stability of the mechanical movement. Maintenance method: Use the supplied tools to tighten the screws one by one.

Dowin laser engraving machine belt, no slip, can obtain a constant speed ratio, stable transmission, vibration absorption, low noise, large transmission ratio range, high allowable linear speed, high transmission efficiency, and compact structure.

The CO2 engraving machine has good stability during use, will not deform the material, very suitable for wood, acrylic, leather, etc.

The Dowin laser engraving machine is made of high-quality steel, which is sturdy and durable and has a long service life. Professional manufacturing, stable characteristics and high reliability.

The engraving effect of the CO2 engraving machine is consistent, which ensures that the processing effect of the same batch is exactly the same

The Co2 laser is a gas molecular laser, the working substance is CO2 gas, and the auxiliary gas is nitrogen, helium, xenon and hydrogen. Since the energy conversion efficiency of this laser is as high as 25%, it is often used as a laser with high power output. The wavelength of carbon dioxide laser is 10.6 microns. It is impossible to see infrared light, has good stability, and is widely used.

Model: Laser Cutting And Engraving Machine
Laser Power:60W/80W/100W/130W/150W
Engraving Area:1300*900mm
Engraving Speed:1000mm/s
Cutting Speed:600mm/s
Repeating Location Accuracy:±0.0125mm
Working Voltage:100/220V ±10% 50HZ/60HZ

Stone Laser engraving Machine
Model:DW-6090/DW-1390
Working area:130cm*90cm
Laser power:80W-150W
Laser type:CWG CO2 laser tube,water-cooled
Engraving speed:0-60000mm/min
Laser Output:1-100%software setting
Resetting positioning accuracy:≤±0.01mm
Power supply:220V/50HZ , 110V/60HZ
Operating temperature:0 – 45°C
Operating humidity:5 – 95%
Min. shaping character:English 1.0 x 1.0mm
Graphic format supported:BMP, PLT, DST, DXF, AI
Software supported:Ruida, PhotoShop, Lightburn
Driving system：Leadshine 57 stepper motor

Co2 laser cutting machine 6090 1390 applied to cutting trademark, woven label, garment leather, clothing toys, computer embroidery cutting , template and paper goods cutting. Applicable materials: leather, fabric, rubber, bamboo and wood, bag and shoes, garment and toys cutting and engraver.

The stamp laser engraving machine can perform deep engraving and shallow engraving on the surface of a variety of non-metallic materials, such as engraving identification codes, trademarks and more complex

In addition to engraving seals, the professional seal engraving machine can also engrave leather pads, leather knife holsters or stainless steel thermos cup sleeves. The engraved patterns are fine and the text is clear.

The 1390 co2 laser engraving machine is an engraving machine using co2 laser technology. This type of laser equipment is a general-purpose model with a rear focus method, small size and high degree of integration.
The 1390 co2 laser engraving machine is suitable for marking most non-metallic materials, such as paper packaging, plastic products, label paper, leather cloth, glass ceramics, resin plastics, bamboo and wood products, PCB boards, etc.

Rubber stamps are generally engraved by hand or laser engraved, and most of the stamps are now engraved by laser stamp engraving machines.
The stamp engraved by the laser stamp engraving machine is more fine and suitable for the engraving of complex patterns. Compared with traditional manual engraving, laser stamp engraving machine has higher precision and higher efficiency.

The laser rubber seal engraving machine needs to use a fan when it is working. After the fan works for a period of time, a large amount of dust will accumulate in the fan and the exhaust pipe, and the dust will affect the exhaust efficiency of the fan. Maintenance method: Loosen the hose clamp connecting the exhaust pipe and the fan, remove the exhaust pipe, and clean the dust in the exhaust pipe and the fan.

New Laser Engraving and Cutting Machine. The machine is a kind of Laser Engraving Machine System equipped with CO2 laser Tube, it is used to engrave on wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics and glass and etc. It is most suitable and the preferred choice of equipments in industries such as advertisement, gifts, shoes,toys and etc. It supports multiple graphic formats, such as HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI and so on.

The Advantage of Dowin CO2 laser machine:
VERSATILITY
SAFETY FRAME
SIMPLE CONTROL
SEASY MAINTENANCE
COMPACT DIMENSIONS
ENERGY-SAVING NO CONSUMABLES

Co2 1390 CNC Laser Cutting Edge Features:

ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to around 8cm or be fully retracted, allowing more control over different focal distance setups.
AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise.
Front REAR PASS THROUGH: There’s always extra room! And it can accommodate materials larger than the workbed size.
BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine.

Dowin factory has a professional engineers team can give you all kinds of plan, we will give you a long warranty, if you have any problem, we can reply shortly. And we also have 24 hours online service. In addation, we have a experienced after-sales team.

Laser head with auto foucs pen.
Optional red light positioning system for better work performance, Automatically adjust the focal length, improve the working efficiency and cutting speed under the premise of ensuring the cutting accuracy.

The professional laser seal engraving machine is easy to operate, with standardized fonts, easy to learn and use, free conversion of orthographic, inverse, and yin and yang characters to meet the diverse needs of customers

The 6040 laser engraving machine is mainly used to engrave and cut non-metallic materials, such as wood, acrylic, stone and so on.
Laser engraving machines are mastered and used by many small and medium-sized handicraft processors, especially non-metallic laser engraving machines and non-metallic marking machines are widely used in wood products, glass, bamboo slips and bamboo tubes, folk paper-cuts, shadow play and other processing industries.

1325 co2 laser marking machine is most suitable for acrylic engraving and cutting,wood/mdf engraving and cuting,leather engraving and cutting,paper engraving and cuting and all non metal materials

At present, the materials of seals are mainly rubber, wood, jade, etc. Among these materials, wood and rubber are the most widely used.
Laser engraving machine is used to engrave rubber and wood stamps, with high work efficiency and fast speed

Laser engraving seals have more advantages in terms of work efficiency and production cost. The traditional corrosion process will not only bring environmental pollution, but also lower efficiency. Machining and other traditional process applications for engraving depth, the generated waste and coolant will also cause environmental pollution. Although the efficiency is improved, the accuracy is not high, and sharp angles cannot be engraved.

CO2 laser cutting and engraving machine has the high precision laser head, professional optical structure design, high stability ,contunuous and long working hours.

1390 Co2 laser cutting engraving machine ,Laser Tube Lifetime:
More than 80W CO2 laser tube with an estimated lifetime of up to 5,000 operation hours depending on power setting usage and water cooling performance
PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime.

*Famous brand CO2 laser tube
*Laser head with auto focus pen
*High precision HIWIN guide rail
*Leadshine 3 phase 57 motors
*Leadshine drivers
*Moving platform controlled by software
*Ruida 6445 software
*S&A brand CW-5200 water chiller
*Double smoke cleaning system
*550W exhaust fan
*008 air pump

1390 Co2 Laser engraving cutting machine well work for all non-metal material such as wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper, leather, rubber, ceramic, glass, etc.

Dowin’s laser cutting machine board adopts RDC6445G system, which has better hardware stability and better anti-high voltage and anti-static interference characteristics.