Factory Price Wood Plywood Engraving Machine Ruida Laser Engraving Machine

The laser rubber engraving machine uses the thermal energy of the laser to engrave the material, and the laser in the laser engraving machine is its core. Generally speaking, laser rubber stamp engraving machines are more widely used and have higher engraving accuracy.

6040 CO2 engraving machine has almost no consumption when working, high processing efficiency, 10 to 15 of manual engraving, high precision, low cost and good printing effect.
CO2 engraving machine has been widely used in printing and packaging industry, craft gift industry, advertising industry and leather garment industry in recent years

Using a laser stamp engraving machine to engrave stamps, the engraving effect is more fine, and complex stamp patterns can be engraved.
The laser stamp engraving machine should pay attention to the cleanliness of the work surface when engraving, and the surface needs to be cleaned in time

The package content of stamp making machine,
Laser engraving software package (English Version)
User manual (CD)
Water pump
Air exhaust fan
Air pump
Communication cable
3 Reflect optics (installed in the machine)
1 Focus optics (installed in the machine)
1 Laser tube

Laser stamp engraving machines can engrave a variety of text, symbols and patterns.
The focused very fine laser beam is like a tool, which can remove the material on the surface of the object point by point, and the engraving content is extremely fine

The advantages of 1390 co2 laser engraving machine:

1. Wide range: CO2 laser can engrave and cut almost any non-metallic material. And it’s cheap!

2. Safe and reliable: non-contact processing will not cause mechanical extrusion or mechanical stress to the material. No “knife marks”, no damage to the surface of the workpiece; no deformation of the material;

3. Precise and meticulous: the machining accuracy can reach 0.02mm;

4. Saving and environmental protection: the diameter of the beam and the spot is small, generally less than 0.5mm; the cutting process saves materials and is safe and hygienic;

Features of the engraving machine
Air assist,remove heat and combustible gases from the cutting surface.
Intuitive control panel, set speed, power and more controls directly from the laser

he discharge tube of the CO2 laser is filled with mixed gases such as CO2, N2, He, etc., the ratio and the total pressure can be changed within a certain range (generally: CO2:N2:He=1:0.5:2.5 The total pressure is 1066.58pa) .Any molecule has three different forms of motion, one is the movement of electrons in the molecule, which determines the energy state of the electrons, and the other is the vibration of atoms in the molecule, that is, the atoms constantly vibrate periodically around their equilibrium positions. It determines the vibrational energy of the molecule, and the third is the rotation of the molecule, which determines the rotational energy state of the molecule. The CO2 laser uses the transition between the vibrational and rotational energy levels of the CO2 molecule to generate laser light.

Dowin laser engraving machine is a professional seal engraving equipment. When using laser engraving, input the pattern you want to engrave into the computer, and the laser can engrave, which is convenient and fast.

The engraving depth is related to factors such as the absorption of the laser by the engraved material, the power of the laser, and the duration of the laser on the engraved material. The laser can perform deep and shallow engraving on the surface of various materials, such as engraving identification codes, trademarks and more complex images.

EFR laser tube makes the discharge more stable, with the lifespan is up to 10,000 hours, stable product structure, good spot uniformity pattern, and high efficiency

Features of the machine
Adjustable speed and power, smooth and precise engraving and cutting USB interface, U-flash disk supported, work with a PC

The laser head of the CO2 engraving machine has high working efficiency and can cut acrylic, paper, cloth, rubber, bamboo, wood, pvc, leather, etc.

Dowin acrylic bending machine or acrylic hot bending machine can bend acrylic, organic board, pvc and other plastic materials. It is widely used in various industries and has the advantages of simple operation and convenient portability.

6090 100W CO2 laser engraving cutting machine is a ideal product to process wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics and glass.

Rubber stamps should pay attention to clear and clear requirements after use:
(1) Cleaning the seal should remove oil, dirt, mildew and rust on the seal.
(2) After cleaning, the seal should be complete, clean, and not deformed, and the handwriting and pattern on the printed surface and the edge should be kept intact and clear.

In recent years, with the wide application of laser engraving machines, the printing and packaging industry printing plates have also gradually applied laser engraving technology. The most common packaging in the printing and packaging industry is carton packaging.

Main configuration:

*Famous brand RECI CO2 laser tube
*Laser head with auto focus pen
*High precision HIWIN guide rail
*Leadshine 3 phase 57 motors
*Leadshine drivers
*Moving platform controlled by software
*Ruida 6445 software
*S&A brand CW-5200 water chiller
*Double smoke cleaning system
*550W exhaust fan
*008 air pump

Dowin laser is China laser machine manufacturer supply Trophy Medal Logo Engraving Laser Trophies Cup Engraving Machine Cnc Laser Engraver
Laser engraving machine is perfect for engraving a wide variety of trophies, plaques, medals, awards and more. Our machines go through a strict quality control process so you know every engraved, marked, routed or cut item using the proper tools & setting will exude the same quality. We have a variety of systems that can handle flat, curved, odd-shaped, and cylindrical items in a wide range of materials. Our laser engraving machine offer the flexibility, capability and quality you need for all your awards engraving needs.

Application:
Laser processing can be carried out on bamboo, crystal, horn, paper plate, plexiglass, marble, cloth, leather, rubber, plastic and
other non-metallic materials.Clothing, embroidery, cloth toys, home decoration cloth, handbags, gloves, toy industry leather, leather cutting and surface carving.
3）

This Rubber self-inking stamp laser making engraving machine could both engraving and cutting one time to make a Rubber self-inking stamp, high precision and fast.
Main Technical Parameters of the rubber stamp laser making machine
Processing area DW-3040B
Laser tube 40W (60W option)
Engraving speed 0-300mm/s
Cutting speed 0-500mm/s
Resolution ratio <0.01mm Motor Step motors Voltage 110V±10%/ 220V±10% ,50HZ ~60HZ Minimum character Letter 1.0 x 1.0mm Laser tube's life 5000+ hours Control system Coreldraw (Ruida option) Working table Alumina and Honeycomb working table Graphic Format Supported PLT, DXF, AI, BMP, DST, etc. Cooling system Water pump Standard configurations Air compressor,exhaust fan, water pump , handle up-down included Options Chiller CW-3000,Ruida software,Bracket stand

The Samples of 1390 Co2 laser cutter.
The common processing materials of co2 engraving machine include acrylic, glass, wood, leather, cloth, plastic, two-color board, horn, cardboard, MDF, marble, and other non-metallic materials. And widely used in advertising processing, gift processing, packaging engraving, leather processing, fabric proofing, seal engraving, product marking, seal engraving and many other industries.

CO2 laser engraving machine can engrave LOGO trademark, text, two-dimensional code, pattern, serial number, symbol, name, anti-counterfeiting code, code, barcode on wood products, bamboo products, leather, paper and other products only through computer control Wait

Dowin adopts CW-3000 water cooler, economical cooling device, easy to install and operate, compact and easy to move, good cooling effect, specially designed for CO2 laser engraving machine.

Applicable Materials
1390 Co2 laser cutting and engraving machine can work on non-metal materials such as double-color sheets ,acrylic ,glass,wood planks,paper,leather,rubber,marble,granite and tiles,etc

When using a laser seal engraving machine, after engraving the seal, it is necessary to clean the seal to ensure that the seal is clean.
You can usually clean or scrub the stamp with detergent

1325 Co2 laser cutting engraving machine is widely used in electronic, craft and gift, garment, leather, toy, computerized embroidery, packing and printing, shoe making, furniture, advertising industries ect.
Application:
1) Acrylic engraving and cutting
2) Wood/MDF engraving and cutting
3) Leather engraving and cutting
4)Paper engraving and cutting
5) Rubber sheet engraving and cutting
6) Double color board & coated board engraving
7) Marble and stone engraving

In our daily engraving process, the engraving depth of the rubber seal engraved by the laser engraving machine is related to factors such as the absorption of the laser by the engraved material, the power of the laser, and the time of the laser on the engraved material.

Machine Features
✦The drive system adopts high-precision linear guides and sliders, with high precision, wear resistance, low resistance, and fast speed; stable transmission, strong shock absorption capacity, and low noise.
✦The positioning of the red light is accurate, and it is convenient and quick to locate the engraving and cutting position.
✦The laser head is responsive and accurate to ensure the quality of engraving.

The Samples of 1390 Co2 laser cutter.
The common processing materials of co2 engraving machine include acrylic, glass, wood, leather, cloth, plastic, two-color board, horn, cardboard, MDF, marble, and other non-metallic materials. And widely used in advertising processing, gift processing, packaging engraving, leather processing, fabric proofing, seal engraving, product marking, seal engraving and many other industries.

1390A model Co2 laser engraving&cutting machine
Model: DW-1390A
Working Area: 1300mm*900mm
Speed: 0-1200 mm/s
Drive: Stepper Motor
weight: 450kgs

The co2 engraving machine can be applied to logs, which are unprocessed wood. It is one of the most common laser processing materials in our daily life, and it is also easy to be engraved and cut. For example, light-colored woods such as birch, cherry or maple are easily vaporized by the laser and are more suitable for carving.
The machine can be used in wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper, leather, rubber, ceramic,glass and other nonmetal materials.

The advantages of co2 laser engraving machine processing:
1. Wide range: carbon dioxide laser can engrave and cut almost any non-metallic material. And it’s cheap!
2. Safe and reliable: non-contact processing will not cause mechanical extrusion or mechanical stress to the material. No “knife marks”, no damage to the surface of the workpiece; no deformation of the material;
3. Precise and meticulous: the machining accuracy can reach 0.02mm

-100W/130W/150W CDWG brand water cooling sealed CO2 glass laser tube

-Laser head with red laser pointer and auto focus system  

-Ruida 6445 software ,Compatible with Light Burn ,Coreldraw .Support incorruptible engraving recovery after power-off

-Z axis use Double leadshine motors with belt Electric ball screw lifting working table controlled by software,intelligent and high precision,with debris drawer

-Standard model with High speed Square rails (can upgrade to module rails)

-Double smoke cleaning system with 550W exhaust fan,move smoking fast protect machine from smoke

Dowin laser is China laser machine manufacturer supply Trophy Medal Logo Engraving Laser Trophies Cup Engraving Machine Cnc Laser Engraver
Laser engraving machine is perfect for engraving a wide variety of trophies, plaques, medals, awards and more. Our machines go through a strict quality control process so you know every engraved, marked, routed or cut item using the proper tools & setting will exude the same quality. We have a variety of systems that can handle flat, curved, odd-shaped, and cylindrical items in a wide range of materials. Our laser engraving machine offer the flexibility, capability and quality you need for all your awards engraving needs.

Machine Features
✦The drive system adopts high-precision linear guides and sliders, with high precision, wear resistance, low resistance, and fast speed; stable transmission, strong shock absorption capacity, and low noise.
✦The positioning of the red light is accurate, and it is convenient and quick to locate the engraving and cutting position.
✦The laser head is responsive and accurate to ensure the quality of engraving.

1390 wood co2 laser engraving machine adopts imported linear guide and DSP system control software. The machine has stable performance and applicable for different industries. It is the ideal choice for non-metal processing industry.

Laser engraving and processing stamps requires relatively high laser power to achieve a certain level of production efficiency. The greater the laser power, the faster the laser engraving speed.

Top Sales 6090 100W Co2 Laser Engraving and Cutting Machine Price
-High-end precision linear rails with ball bearings for fast, smooth motion
-Large working engraveable area of up to 35” x 24”
-Front pass through doors open for larger pieces to put into machine
-Motorized Z table, autofocus sensor, and visible red laser pointers are included
-Capable of cutting up to ½” thick acrylic and wood
-Can engrave bottles and round objects with the rotary attachment included

CO2 engraving machine is very economical and environmentally friendly.
The beam and spot diameter are small, generally less than 0.5mm; cutting process saves materials

Maintenance of rubber stamp laser engraving machine accessories: tighten the screws.
After the motion system works for a certain period of time, the screws at the motion connection will become loose, and the loosening of the screws will affect the stability of the mechanical movement. Maintenance method: Use the supplied tools to tighten the screws one by one.

Professional laser stamp engraving machines have high flexibility when engraving stamps and can meet the requirements of complex patterns.
Using the laser stamp engraving machine, the speed of rubber materials is fast, the work efficiency is high, and it can undertake large-scale orders

Stone Laser engraving Machine
Model:DW-6090/DW-1390
Working area:130cm*90cm
Laser power:80W-150W
Laser type:CWG CO2 laser tube,water-cooled
Engraving speed:0-60000mm/min
Laser Output:1-100%software setting
Resetting positioning accuracy:≤±0.01mm
Power supply:220V/50HZ , 110V/60HZ
Operating temperature:0 – 45°C
Operating humidity:5 – 95%
Min. shaping character:English 1.0 x 1.0mm
Graphic format supported:BMP, PLT, DST, DXF, AI
Software supported:Ruida, PhotoShop, Lightburn
Driving system：Leadshine 57 stepper motor

The application of co2 engraving machine can be found in almost every industry, and it has become a very common equipment in our daily work. Now, it is mainly used in advertising industry, craft industry, mould industry, construction industry, printing and packaging industry, wood industry, decoration industry, leather industry…

Dowin laser machine produces stone laser machine,There are no limits on your creativity when it comes to engraving stone with a laser. Engrave a wide variety of stones such as marble, slate, granite or porcelain and finish or personalise the stylish natural products.

Dowin has accumulated many years of professional production experience, pursues excellence in design materials and workmanship, regards quality as the life of the enterprise, and uses a strict quality management system to meet national quality standards.

Generally speaking, the depth setting of seal engraving should be 0.5-1.1mm, but the specific content should be judged according to the required engraving.
Dowin laser engraving machine is equipped with its own manual, and provides online technical support to give customers a good experience

The laser engraving machine uses the thermal energy of the laser to engrave the material, and the laser in the laser engraving machine is its core. Generally speaking, laser engraving machines are used in a wider range, with higher engraving precision and faster engraving speed. Moreover, compared with the traditional manual engraving method, laser engraving can also make the engraving effect very delicate, which is no less than the craftsmanship level of manual engraving.

Processing area1300*900mm
Laser tube80W(Option100W/ 130W)
Engraving speed0-60000mm/min
Cutting speed0-10000mm/min
Resolution ratio<0.01mm Location precision<0.01mm Voltage110V±10%/ 220V±10% ,50HZ ~60HZ

Co2 laser cutting machine DW-1390 is a kind of laser engraving cutting machine system equipped with Co2 laser tube,it is used to engrave on acrylic, PVC, rubber sheet, plastic, crystal, glass, wood, bamboo, oxhorn, figuline,marble, leather, cloth, double-color board, etc. nonmetal materials .

CO2 laser engraving machine features:
1. Customized linear slide, high precision, low wear and long service life.
2. high strength, low deformation.

Now the seal has penetrated into all aspects of our current food, clothing and use. The traditional engraving method is labor-intensive and low-efficiency. It can be easily engraved by laser seal engraving machine processing, which can fully meet the needs of fine processing of seal engraving.

CO2 laser engraving machine adopts EFR laser tube, which has stable machine performance and long service life, which is very suitable for engraving rubber seals and other products

Co2 laser cutting machine
Optional accessories

(01)Rotary attachment
(02)Auto focus pen
(03)Laser tube of high power(100W/130W/150W)
(04)Honey comb platform
(05)Water chiller(CW-5000 CW-5200)

At present, the commonly used seals on the market include stone seals, jade seals, and rubber seals. In recent years, the demand for rubber seals is increasing, and the engraving demand for rubber seals is increasing day by day. It is particularly important to have a professional seal engraving machine.

Laser engraving machine is a very mature professional technology at present, and the product has a high technical content of optical, mechanical and electrical integration. In the mid and late 1990s, with the successful research and development of laser engraving technology, the engraving industry began to develop rapidly and is now used in many industries.

Dowin Laser Machine Parts
Dowin 1390 laser machine is equipped with DSP Control System for RDdraw directly,also supports CoreDraw , Lightburn and Auto CAD and other advance software. And Famous brand S&A CW5200 water chiller,can enusre long and stable use of laser machine, Electrical moving table with stainless steel ball screw, will not unform, although long time working.Auto foucs pen can find the correct focal length easily…

When using the laser engraving machine, pay attention to cleaning and maintenance, good ventilation, and wipe the cleaning and maintenance of the machine tool at any time. The machine tool guide rail is a high-precision core component. After each work is completed, it must be wiped clean and kept clean and lubricated.