Laser Marking Machine EZCAD2 JPT MOPA Laser Marking Machine 2.5D Laser Marking Machine For Metal
Fiber laser marking machine uses laser beams to make permanent marks on the surface of various materials.
The marking effect of the fiber laser marking machine is to expose the deep material through the evaporation of the surface material, or to burn off part of the material through light energy, and to display various graphics such as patterns, characters, and barcodes that need to be etched.
Laser Marking Machine EZCAD2 JPT MOPA Laser Marking Machine 2.5D Laser Marking Machine For Metal
Fiber laser marking machine uses laser beams to make permanent marks on the surface of various materials.
The marking effect of the fiber laser marking machine is to expose the deep material through the evaporation of the surface material, or to burn off part of the material through light energy, and to display various graphics such as patterns, characters, and barcodes that need to be etched.
Fiber laser marking machine parameters:
| Model | DW-20F Fiber Laser Marker |
| Laser Power | 20W/30W/50W/60W/70W/100W |
| Laser source | JPT/Raycus (IPG optional) |
| Laser Wavelength | 1064nm |
| Q-frequency | 20KHz~30KHz |
| Divergence | 0.3mard |
| Marking Range | 110*110mm/200*200mm/300*300mm |
| Minimum Line Width | 0.02mm |
| Indicate light | Double red light |
| Minimum Character | 0.15mm |
| Marking Depth | 0 ~0.5mm |
| Engraving Line Speed | ≤7000mm/s |
| Repeatability Accuracy | ±0.001mm |
| Beam Quality | M2:1.2~1.8 |
| Marking Format | Graphics, Text, Bar Codes, Two-dimensional Code, AutomaticallyMarking the Date,Batch number,Serial number,Frequency,etc. |
| Support operation system | Win7/8/10 system |
| Graphic Format Supported | BMP,IPG,GIF,TGA,PNG,TIF,AI,DXF,DST,PLT,etc |
| Working Voltage | 110V/220V 50~60Hz |
| Unit Power | <0.5kw |
| Use of the Environment | Clean and Dust Free or Dust less |
| Working Condition:Humidity | 5%-75%,Free of Condensed Water |
| Laser Module Life | >100000 hours |
