20w 30w 50w 60w Jewelry silver gold portable JPT M7 mopa fiber laser marking machine metal deep engraving laser engraver machine
Deep engraving laser marking machine wavelength is short, focusing spot is extremely small, so the thermal impact of the marking process in the mold is extremely small, there will be no mold scorching, melting, deformation and other problems. The laser marking machine has a small spot, and the precision of marking graphics on the mold is very high, and the laser words are very fine points and lines, so the fine quality of the engraved graphics is good. Processing method is simple and flexible, only need to set up the need to mark the graphics on the computer, you can complete the marking needs through the laser, marking trademark logo in just a few seconds to complete. With the traditional screen printing and other ways to greatly reduce processing costs, and improve the efficiency of processing, can bring considerable economic benefits for enterprises.
Versatility: You can use laser marking technology on all types of aluminum.
Depth: When laser engraving aluminum, you can easily achieve a depth of marking that is not possible with other materials.
Durability: Aluminum laser engraving creates strong marks that are resistant to heat, abrasion, coatings and finishes.
Marking Durability: With aluminum laser markers, you can produce permanent, high-contrast marks that are immediately visible.
Cost-effective: When you use a laser marking system on aluminum, you can expect to save money by operating without consumables with minimal maintenance requirements.
Fast operation: Laser engraving allows you to mark identifiers on aluminum surfaces as fast and efficiently as possible.
| Marking scope | 100*100(200*200)mm |
| Power | 20W(Optional 30W/50W) |
| Laser sources | Fiber module |
| Laser Head | Sino-Galvo SG7110 |
| Red light dot | From Xi’an |
| Wave length of laser | 1064nm |
| Minimal character | 0.001mm |
| Marking speed | 7000mm/s |
| Support format | PLT, BMP, DXF, JPG, TIF, AI etc |
| Power supply | Taiwan MW |
| Power supply | 110V/220V/ 50Hz/2kVA |
| Process Material | All kinds of metal and part of Non-metal Materials |
| Cooling ways | Inner Installed-air Cooling |
| Interface | USB |
| Warranty | 3 years |
