Fiber Laser Marking Machine for Stainless Steel Engraving Metal Laser Machine

The basic principle of laser marking machine:
The laser emitted by the laser undergoes a series of treatments, and after being focused by the lens, the energy is highly concentrated in a small range, so that the surface material is instantly melted or even vaporized, and the required image is formed by controlling the path of the laser on the surface of the material. Text mark. Depending on the material properties, the workpiece will undergo a series of physical or chemical changes, such as melting, vaporization, oxide formation, discoloration, and so on. This is how laser processing works

Laser marking technology can be used on all types of aluminum. When laser engraving aluminum, deep marking can be easily achieved that is not possible with other materials. Aluminum laser engraving creates strong marks that are resistant to heat, abrasion, coatings and finishes. With aluminum laser marking machines, permanent, high-contrast marks can be produced that are immediately visible. When you use a laser marking system on aluminum, you can expect to save money with minimal maintenance requirements for a consumable-free operation. Laser engraving marks identifiers on aluminum surfaces with maximum speed and efficiency.

Good permanent, laser marking is the use of high energy density laser to local irradiation of the workpiece, so that the bathroom material vaporization or color change chemical reaction, thereby leaving a permanent mark. Flexibility, using software drawing, you can quickly draw and generate a variety of words and graphics, the pattern is clear and beautiful. Safe and environmentally friendly, no toxic gases are produced in the laser marking process, which can reduce the harm to the human body.

Fiber laser marking machine uses fiber laser to output laser, with high electro-optical conversion rate, small size, no external water cooling equipment, and good beam quality. The components use domestic fiber lasers and high-speed digital scanning galvanometer systems.
1) Wavelength: 1064±10nm
2) Min Line Width: 0.01mm
3) Min Character: 0.15mm
4) Marking Speed: ≤10000mm/s

There are many advantages to marking QR codes with a laser marker:
1. Non-contact marking will not cause damage to the workpiece
2. Laser marking has high processing accuracy, which can meet the needs of marking on very small materials

Composition of fiber laser marking machine
Fiber laser marking machine is mainly composed of laser generator, laser generator, scanner scanning galvanometer system software, field mirror, and laser marking automatic control system.
The marking of the fiber laser marking machine is long-term. Laser engraving is essentially a “destructive removal” process. The marked marks are not easy to be copied and changed, and the marks are not easy to disappear due to environmental factors.

Laser marking machine is a machine that uses laser to mark various materials. The effect of laser marking is to expose the deep material through the evaporation of the surface material for marking.
The handheld laser marking machine is mainly used for marking large mechanical parts, which is easy to carry

Laser marking machines can also be used for shallow engraving. The laser marking machine is mainly used on some molds, seals, etc. for shallow engraving. Dowin laser marking machine adopts EZCAD3 software, which can meet the special needs of customers

Fiber laser marking machine high quality laser, choose professional quality laser, long life, fast speed, uniform beam, high precision, is the core component of the equipment. Adopt high-end technology vibrating mirror scanning system, making high efficiency, no distortion, improve marking quality and speed.

Features of fiber optic marking machine:
The laser beam is thin, the processing material consumption is small, and the processing heat affected zone is small
High processing efficiency, computer control, easy to automate

The handheld laser marking machine is designed to solve the problem of laser marking of large parts.
The whole machine of Dowin hand-held laser marking machine is about the same size as the host computer, small and convenient, it can be hand-held for operation, and can mark large-scale machinery in any direction.

Laser marking machines are widely used in small studios or home DIY applications.
The laser marking machine adopts flexible variable text processing, changes the text in real time during processing, and can directly read and write text files and Excel files dynamically.

Fiber laser marking machine has good beam quality, smaller focusing spot, can realize ultra-fine marking, wider application range, small heat affected area, no thermal effect, no burning problem, fast marking speed, high efficiency, complete machine It has the advantages of stable performance, small size and low power consumption.

Excellent laser beam, fine and beautiful marking lines, the marking effect processed on the same material is obviously better than other similar products on the market. The marking speed is fast, the order processing time is short, and the profit per unit time and single order is maximized. The laser output power is stable and the reliability is high, which can meet the production needs of continuous and stable processing for hours. High electro-optical conversion rate, no power coupling loss, no consumables, and maintenance-free, saving customers a lot of use costs.

The optical parts of the machine are specially used for high speed laser marking of metal materials. The machine needs no daily maintenance, no consumable parts, and has a long service life. The machine adopts general air cooling system. Optical fiber output, suitable for blackening. This machine is mainly used for bar code marking, data matrix marking, serial number marking, technical data table marking, security code marking and so on. The machine is compact, easy to use, easy to move, save space, flexible to use, easy to operate.

The laser marking machine does not need to open the abrasive tool in the production process, it can be edited with a computer, the operation is simple, and it is not limited by the output, which greatly shortens the development cycle of new products and reduces the development cost.

Features of enclosed fiber laser marking machine:
1. Long life, more than 100,000 hours.
2. The production efficiency is 2 to 5 times that of the traditional laser marking machine or laser engraving machine.

With the development of laser technology, different styles of laser marking machines have appeared. 2 5D 3D deep engraving and embossing fiber laser marking machine is a special marking software that uses laser marking to carry out a deep marking on the surface of aluminum alloy materials to achieve deep engraving effect.

2D worktable/XY worktable, small XY manual translation worktable, manual adjustment, flexible and convenient, and reliable precision.

Hand held fiber laser marking machine 20W/30W
Hand held fiber Laser marking machine adopts the third generation (the most advanced) solid-state fiber laser to create the super fine effect of marking. This model is compact structure, no pollution, no optical power coupling loss, air cooling, high efficiency and stability, its life is more than 100000 hours. Fiber Laser engraver output power:20W. The software is easy to use and can work with any content such as graphic,charters,letters,barcode,qrcode etc.It can widely used in various metal and some non-metallic surface to create the permanent mark.

Fiber laser marking is an application field of laser in industry. At this point, it would be useful to give some information and definitions about fiber laser marking. Laser marking is the process of using a laser to leave the desired mark on any product to be applied. Fiber laser marking machines use a computer-controlled laser beam to complete this process without the help of any tools or ink. Fiber laser marking machine does not need consumables, numbers, text, bar codes, trademarks and other signs are produced with the help of computers. As a result, the areas of application are very flexible.

The laser marking machine is easy to use, and any employee can learn the operation of the laser marking machine in a short time, so that the machine can operate normally.
At the same time, the laser marking machine is beneficial to protect the environment, and there is no material that is not conducive to the environment, which can further create profit value in environmentally friendly shipping.

The fiber laser marking machine does not have any mechanical pressure on the workpiece during processing, and the thermal influence is small, which will not cause deformation or damage to the workpiece.
The flexibility of fiber laser marking machine is very high, and it can be freely applied to various shapes, materials, specifications and sizes, and is not limited by the processing environment. It is also suitable for small-batch product development and large-scale mass production.

If you want to start a side business or open a small studio, a portable laser marker is perfect. The Dowin mini laser marking machine is very small and can be carried around.
#High speed Digital Galvo scanner with double red pointer
# 110*110mm-175*175mm Working size
#Packing size : 75*57*34cm
#Gross Weight : 28Kgs

The portable handheld laser machine has a small area and is easy to carry. The laser head can be moved, and it can print large-scale products, and can meet the products that cannot be printed by desktop computers. the
The handheld laser marking machine uses laser for marking and engraving, which has low loss, good stability, and is not affected by external dust and mechanical looseness. the
The maintenance-free operation of the handheld laser marking machine, the laser does not require any maintenance, and there is no need to adjust or clean the lens, and the marking speed is fast

“Dowin fiber laser marking machine main features:
1) Superior laser beam and uniform power density, very stable laser power.
2) Quick speed without deviation, small volume, compact design, good stability, performance reached the international advanced standard.
3) Portable design, environmental protection
4) High efficiency for photoelectric conversion, simple operation, Compact in structure, support harsh working environment, no consumables.
5) Mark on most high reflective materials such as aluminum, copper, gold and silver without the shadow and virtual open phenomenon.”

Handheld portable laser marking machine is currently very advanced laser marking equipment.
Handheld laser marking machines are mainly used for marking products on various large workpieces and places with relatively limited space.
The handheld laser marking machine occupies a very small area and can be put into the trunk of a car, making it very portable. However, the hand-held laser marking machine has high marking accuracy, fast speed and stable performance.

Ear tag is a tool managed by animal husband Gao Xiang, choosing high-quality ear tag is not only less harmful to animals, but also durable. The ear tag pattern marked by the laser marking machine is clear and wear-resistant, so the laser marking machine is widely used in marking ear tags.

High-quality laser beam, fine spot, no consumables, imported scanning galvanometer, small size, fast speed, accurate positioning, simple software operation and powerful functions.

The handheld laser marking machine is designed to solve the problem of laser marking of large parts.
The whole machine of Dowin hand-held laser marking machine is about the same size as the host computer, small and convenient, it can be hand-held for operation, and can mark large-scale machinery in any direction.

The hand-held laser marking machine exhibits superior performance using optical fiber as the medium for transmitting high-power laser light. The hand-held fiber laser marking machine has the advantages of good winding, small aperture and low loss.
In daily applications, mobile phone laser marking machines are often used in tire marking

The deep carving laser marking machine uses the special marking software for laser marking to carry out a deep marking on the surface of the aluminum alloy material. The processing efficiency of the laser marking machine is high and the speed is fast.

The machine can process all metal materials, such as gold, silver, copper, stainless steel, aluminum, etc.; and some non-metal materials.
1.Electronic Components: Resistors, Capacitors, Chips, Printed Circuit Boards, Keyboard, etc.
2.Mechanical Parts: Bearings, Gears, Standard Parts, Motor, etc.
3.Instrument: Panel Board, Nameplates, Precision equipment, etc.
4.Hardware Tools: Knives, Tools, Measuring Tools, Cutting Tools, etc.
5.Automobile Parts: Pistons&Rings, Gears, Shafts, Bearings, Clutch, Lights.
6. Daily Necessities: Handicrafts, Zipper, Key Holder, Sanitary Ware, etc.
7. Part of nonmetals such as plastic animal ear tag, ear tag marking, pig ear tag marking, pet bowl marking etc.

It can be customized according to customer requirements, with stable output power, good optical mode, excellent beam quality, fast marking speed, good effect, high efficiency, simple operation, no consumables, and maintenance-free, which can fully meet the needs of industrial continuous work.
1) Marking Speed: ≤10000mm/s
2) Marking Depth: ≤0.5mm
3) Power Supply: 110V/220V(±10%)/50Hz/4A
4) Work Area: 110x110mm/200x200mm/300*300mm (Optional)

The laser marking machine is controlled by computer software, no need for consumables and saves manpower. Marking on the surface of the workpiece to form a permanent mark that does not fade due to external environmental factors. High processing accuracy and fast drawing of marking system to achieve fine marking of products.

The non-contact processing method has no mechanical effect during the processing, and will not cause damage to the product, and the yield is high. Full computer control, intuitive operation, simple and friendly interface, using general software to input pattern documents, easy input and powerful.

Features of enclosed fiber laser marking machine:
1. Long life, more than 100,000 hours.
2. The production efficiency is 2 to 5 times that of the traditional laser marking machine or laser engraving machine.

Fiber laser marking machine uses laser beams to make permanent marks on the surface of various materials.
The marking effect of the fiber laser marking machine is to expose the deep material through the evaporation of the surface material, or to “carve” traces through the physical changes of the surface material caused by light energy.
The fiber laser marking machine burns part of the material through light energy to display various graphics such as patterns, text, and barcodes that need to be etched.

Fiber laser marking machine adopts fiber laser, oscilloscope scanning system, stable output power, good optical mode, excellent beam quality, fast marking speed, good effect, high efficiency. Beautiful appearance, simple operation, no consumables, low depreciation costs for long-term operation without failure, maintenance-free, can fully meet the needs of industrial continuous work.

Flying laser marking machine, also known as online laser marking machine and laser inkjet printer, is a high-tech product developed and designed by our company for online marking of product packaging in various industries. Ultraviolet and other models are combined with an automatic assembly line workbench, and a flying marking system that meets customer requirements can realize assembly operations and improve production efficiency.

The content marked by the laser marking machine is not easy to erase and change, and has the characteristics of permanent marking, which can basically be operated anytime and anywhere when you have a rest day or when you are free from get off work.
Bringing the mini laser marking machine to mark bird rings and ear tags during rest is very economical

High optical and electrical conversion rate, professional for marking special materials in industrial processing. Hardware control technology and intelligent software, low energy consumption and easy maintenance, high precision marking quality and work stability. Full computer control, intuitive operation, easy, friendly interface, using common software to input pattern manuscript, easy to input, powerful.

Laser marking machine Laser processing system combined with computer numerical control technology can constitute fast automatic processing equipment, can type all kinds of text, symbols and patterns, easy to use software design marking pattern, change the marking content, to meet the requirements of modern production efficiency, fast pace. Laser processing without pollution sources, with good beam quality, small size, fast speed, long working life, flexible and convenient installation and maintenance free characteristics.

Fiber laser marking machine can process a variety of metal materials, especially for high hardness, high melting point, brittle material marking more advantages. Non-contact processing, no damage to the product, no tool wear, marking quality is good. The laser beam is thin, the processing material consumption is small, and the processing heat affected zone is small. High processing efficiency, using computer control, easy to realize automation. Adopt the integrated structure, can be equipped with automatic focusing system, the total operation process humanized.

What materials can be marked by laser marking machine
1. The laser marking machine can engrave metal materials and various non-metal materials. It is more suitable for the production and processing of certain products with detailed requirements and high precision.
2. Processing and production of mobile phone accessories, metal products, tool accessories, precision equipment, glasses clocks, jewelry and other materials

The fiber laser marking machine uses professional control software – the latest version of Ezcad, with powerful editing functions, stable system, and easy operation and installation.
The laser galvanometer scanning head of the laser marking machine is highly efficient and energy-saving, with high-definition scanning and fast speed.
The portable laser marking machine is compact, convenient and durable.

Laser marking machine is a combination of computer and marking machine, which greatly improves production efficiency. The user only needs to input the corresponding content on the computer to realize the laser output.

Laser marking machines are widely used and can mark any information such as graphic logos and text on metal products. The marking pattern is fine and beautiful, and it is not easy to fade.

Fiber laser marking machine laser marking technology as a new modern processing technology, compared to traditional processing methods, laser marking technology has high precision, good results, wide range of applications, the use of environmental protection, no consumables, fast, high efficiency and other advantages.

Dowin laser is China laser machine manufacturer supply 50w Brass and aluminum brass cutting fiber laser marking machine

1) Superior laser beam and uniform power density, very stable laser power.
2) Quick speed without deviation, small volume, compact design, good stability, performance reached the international advanced standard.
3) Portable design, environmental protection
4) High efficiency for photoelectric conversion, simple operation, Compact in structure, support harsh working environment, no consumables.
5) Mark on most high reflective materials such as aluminum, copper, gold and silver without the shadow and virtual open phenomenon.

The advantages of laser marking machine:
1 No consumables, low processing cost after use
2 The number of maintenance is less, which can save a lot of warranty costs
3 A wide range of marking can be used for common metals and alloys, rare metals and alloys, metal oxides, crystals with special surface treatment, plastics, etc.

“Machine Features
1.Portable design, flexible application, convenient and efficient operation.

2.Aluminum alloy machine structure.

3.High quality Raycus laser source , good laser beam quality, uniform laser power density, and stable laser power output. It has the characteristics of no laser leakage, resistance of high reflection and so on, meeting the application demand of the mainstream market.

4.High speed galvano scanner has the advantages of small size, high scanning speed and good stability. Its performance reaches the advanced level in the world.

5.Easy to use, no consumables, low power consumption; The marking is more precise and clear. It has an irreplaceable advantage in areas where depth, smoothness and fineness are highly demanded. It fully meet the needs of industrial continuous working.

6.Strong marking software with multiple functions, compatible with software AutoCAD, Coreldraw, Photoshop, etc. supporting formats of PLT、AI、DXF、BMP、JPG, etc,supporting SHX and TIF font library, and itself possessing multi-font library; Support marking of variable numbers, bar codes, QR codes, etc.

7.Based on different working requirements, we can build the machine with optional functions like rotary, 2D/3D work table, auto focusing, dynamic auto focusing, etc.”

The wavelength of the fiber laser marking machine is 1064nm. Infrared light, fiber transmission, thermal processing, and laser high-energy beam engraving have a great influence on the surface heat of the material.
In practical applications, fiber laser marking machines are mostly used for metal material marking, such as bearing marking, engine number marking, metal nameplate marking, etc.

Laser marking technology can be used on all types of aluminum. When laser engraving aluminum, deep marking can be easily achieved that is not possible with other materials. Aluminum laser engraving creates strong marks that are resistant to heat, abrasion, coatings and finishes. With aluminum laser marking machines, permanent, high-contrast marks can be produced that are immediately visible. When you use a laser marking system on aluminum, you can expect to save money with minimal maintenance requirements for a consumable-free operation. Laser engraving marks identifiers on aluminum surfaces with maximum speed and efficiency.

With the development of technology, more and more laser marking machines appear in people’s lives. What are the categories of laser marking machines?
1. Classified by laser: CO2, semiconductor, YAG, optical fiber, green light, ultraviolet light, mopa.
2. Classified by light wavelength: ultraviolet light (355 nm), green light (532nm), lamp pump YAG (1064nm), semiconductor YAG (1064nm), optical fiber line (1064nm), mopa (1064nm), CO2 (10.64um)
Here we talk about the fiber laser marking machine in detail