Fiber Laser Marker 30w 50w Laser Marking Machine EZCAD3 for Deep Engraving Fiber Engraving Machine
Fiber laser marking machine uses laser beams to make permanent marks on the surface of various materials.
Equipment features of fiber laser marking machine:
1. It can process a variety of metal and non-metal materials. It is especially advantageous for marking high hardness, high melting point, and brittle materials.
2. It belongs to non-contact processing, no damage to products, no tool wear, and good marking quality.
3. The laser beam is thin, the consumption of processing materials is small, and the processing heat-affected zone is small.
Fiber Laser Marker 30w 50w Laser Marking Machine EZCAD3 for Deep Engraving Fiber Engraving Machine
Fiber laser marking machine parameters:
| Model | DW-20F Fiber Laser Marker |
| Laser Power | 20W/30W/50W/60W/70W/100W |
| Laser source | JPT/Raycus (IPG optional) |
| Laser Wavelength | 1064nm |
| Q-frequency | 20KHz~30KHz |
| Divergence | 0.3mard |
| Marking Range | 110*110mm/200*200mm/300*300mm |
| Minimum Line Width | 0.02mm |
| Indicate light | Double red light |
| Minimum Character | 0.15mm |
| Marking Depth | 0 ~0.5mm |
| Engraving Line Speed | ≤7000mm/s |
| Repeatability Accuracy | ±0.001mm |
| Beam Quality | M2:1.2~1.8 |
| Marking Format | Graphics, Text, Bar Codes, Two-dimensional Code, AutomaticallyMarking the Date,Batch number,Serial number,Frequency,etc. |
| Support operation system | Win7/8/10 system |
| Graphic Format Supported | BMP,IPG,GIF,TGA,PNG,TIF,AI,DXF,DST,PLT,etc |
| Working Voltage | 110V/220V 50~60Hz |
| Unit Power | <0.5kw |
| Use of the Environment | Clean and Dust Free or Dust less |
| Working Condition:Humidity | 5%-75%,Free of Condensed Water |
| Laser Module Life | >100000 hours |
Fiber laser marking machine uses laser beams to make permanent marks on the surface of various materials.
Equipment features of fiber laser marking machine:
- It can process a variety of metal and non-metal materials. It is especially advantageous for marking high hardness, high melting point, and brittle materials.
- It belongs to non-contact processing, no damage to products, no tool wear, and good marking quality.
- The laser beam is thin, the consumption of processing materials is small, and the processing heat-affected zone is small.
