Two-dimensional code or bar code anti-counterfeiting technology can be used to achieve fine fiber laser marking machine
Fiber laser marking machine photoelectric conversion efficiency, good beam quality, fine lines, small spot, long service life of the laser. High-speed scanning oscillator, suitable for industrial mass production. No mechanical stress, small thermal stress, no damage to the processed material, not to mention the deformation, can be processed on most materials. Laser marking never fall off, high temperature resistance, anti-counterfeiting and environmental protection.
Anti-counterfeiting technology is commonly used bar codes, two-dimensional codes to achieve product security, these bar codes and two-dimensional codes of many metal industry is the use of fiber laser marking machine hit. Fiber laser marking is a marking method that uses a high energy density laser to locally irradiate the metal workpiece, causing the surface material to vaporize or undergo a chemical reaction of color change, thus leaving a permanent mark. This marking does not fade easily and is not easily altered, unless the workpiece is destroyed. This is also the advantage of using laser marking.
At the same time, fiber laser marking machine as a new laser marking technology, marking effect is very fine, the line up to millimeter to micron scale, using the laser marking mark imitation and change are very difficult. For those metal parts with small and complex shapes, fiber laser marking machine can easily complete the marking work, not only the effect is beautiful, and will not have direct contact with the object, no damage to the object. Fiber laser marking machine itself is computer-controlled, can easily achieve and database system docking, in the marking software into the database function, the customer can verify through the database corresponding to the laser code on the product, in order to identify the authenticity of the product.
| Work Area | 110*110mm/150*150mm/200*200mm/300*300mm ( Optional ) |
| Laser Power | 20W/30W/50W/100W |
| Fiber laser generator | Raycus/JPT |
| Laser Pulse Frequency | 20KHz – 200KHz |
| Laser scanner | Sino-Galvo SG7110 |
| Red light dot | Yes |
| Power supply | Taiwan MW (Meanwell) |
| Wavelength | 1064±10nm |
| Beam Quality M2 | <2 |
| Min Line Width | 0.01mm |
| Min Character | 0.15mm |
| Marking Speed | ≤10000mm/s |
| Repeat Precision | ±0.01mm |
| Marking Depth | ≤0.5mm |
| Power Supply | 110V /220V(±10%)/50Hz/4A |
| Gross Power | <500W |
| Laser Module Life | 100000h |
| Cooling Style | Air Cooling |
| System Composition | Laser source, Control System, Industrial Computer, Vibration lens |
| Working Environment | Clean and Dust Free |
| Power | AC220V, 50HZ, 10Amp Stable Voltage |
| Warranty | 3 years |
…
…
