6040 Laser Cutting Machine Tumbler Wood Laser Cutting And Engraving Machine

The CO2 laser engraving machine has obvious advantages in processing:
1. Energy saving and environmental protection: the diameter of the beam and the spot is small, generally less than 0.5mm; the cutting process saves materials and is safe and hygienic;
2. Consistent effect: ensure that the processing effect of the same batch is completely consistent.
3. High-speed and fast: high-speed engraving and cutting can be performed immediately according to the pattern output by the computer.

Rubber stamp engraving machine is mainly application for rubber stamp making , with super accuracy and high precision , engraving and cutting effect very smoothly, no glitch, even if mini letters can show super clear 

6090 1390 Co2 laser cutting machine widely used in electronic, craft and gift, garment, leather, toy, computerized embroidery, packing and printing, shoe making, furniture, advertising industries ect.
Application:
1) Acrylic engraving and cutting
2) Wood/MDF engraving and cutting
3) Leather engraving and cutting
4)Paper engraving and cutting
5) Rubber sheet engraving and cutting
6) Double color board & coated board engraving
7) Marble and stone engraving

With the maturity of the development of laser engraving technology, laser engraving machine engraving seals are widely used for graphic processing of products, and laser engraving machines are rapidly used in various materials that need to be engraved.

Dowin newly plexiglass 6090 laser engraving machine 80W 100W 130W Co2 lazer cutting machines are a ideal product to process wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics and glass.

The Main Features of 1390 Co2 laser machine:
1. High speed laser cutting machine adopts high efficiency CWG/YL/RECI laser tube,the laser beam is more stable than the traditional type,and have long life time.

2. Compared with the ordinary laser machine,the series adopts more scientific design and high strength steel-frame structure,which increase the fuselage strength more than 40% to prevent the machine from distortion during long term work.

3. The humanized and modern appearance makes the operation and maintenance quite easy.

6090 Co2 laser cutting machine FEATURES:
100W Co2 Laser tube
RUDIA 6445 control system, support output from RUIDA directly
CW5200Water chiller, which ensures the service life of laser tube efficiency.
Standard red dot positioning system, auto focus function help operators to locate laser beam easily.

New Laser Engraving and Cutting Machine. The machine is a kind of Laser Engraving Machine System equipped with CO2 laser Tube, it is used to engrave on wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics and glass and etc. It is most suitable and the preferred choice of equipments in industries such as advertisement, gifts, shoes,toys and etc. It supports multiple graphic formats, such as HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI and so on.

*Famous brand CO2 laser tube
*Laser head with auto focus pen
*High precision HIWIN guide rail
*Leadshine 3 phase 57 motors
*Leadshine drivers
*Moving platform controlled by software
*Ruida 6445 software
*S&A brand CW-5200 water chiller
*Double smoke cleaning system
*550W exhaust fan
*008 air pump

Application:
Laser processing can be carried out on bamboo, crystal, horn, paper plate, plexiglass, marble, cloth, leather, rubber, plastic and
other non-metallic materials.Clothing, embroidery, cloth toys, home decoration cloth, handbags, gloves, toy industry leather, leather cutting and surface carving.
3）

The parameter of Co2 laser machine:
Work Area (Inches): 35 x 51
Focusing: Automatic
Red Dot Alignment Pointer: Yes
Vertical Travel of Table (Inches): 13(Powered)
Laser Power (Watts): 80, 100, or 130
Power Supply (V/Ph/Hz): 220/1/60
Compatible Software: Ruida, CorelDraw, Photoshop, Lightburn

Dowin laser engraving machine rotating shaft, faster speed, wide application, simple operation, flexible use, energy saving and environmental protection, easy to clean.

Dowin 1325 co2 laser cutting engraving machine with RECI,CWG,YL famous brand laser tube, Electrical moving table with stainless steel ball screw and CW5200 water chiller.

The cover of the CO2 engraving machine adopts a translucent design, which can see the specific situation of the work, and it is easier to control the effect of the work.

The Feature of stamp engraving machine:
1)Perfectly tidy power supply system.The power supply system of the whole machine is strictly in accordance with international standards. Different control power signal lines adopt separate routing design, avoiding electromagnetic interference between various types of signal lines.

2)Adopt high-precision guide rails imported from South Korea.Improve laser engraving and cutting accuracy and ensure that the laser machine runs efficiently and stably for a long time.

3)5mm thick aluminum alloy oxidation work platform, to ensure the level of the work platform, improve the accuracy of object carving.

Laser engraving machine has a wide range of applications, mainly used to engrave various non-metallic materials: MDF, bamboo and wood products; two-color board, cloth; acrylic, leather; glass, jade, plexiglass, etc.

The laser rubber seal engraving machine needs to use a fan when it is working. After the fan works for a period of time, a large amount of dust will accumulate in the fan and the exhaust pipe, and the dust will affect the exhaust efficiency of the fan. Maintenance method: Loosen the hose clamp connecting the exhaust pipe and the fan, remove the exhaust pipe, and clean the dust in the exhaust pipe and the fan.

Using a professional rubber laser engraving machine, the processing energy is very low. The laser engraving machine does not have any consumables and consumables of materials. Laser engraving only needs electricity, and it is still very low power consumption. Laser engraving machine processing has the advantage of low energy consumption.

Machine Features
✦Drive system with high precision linear guide and slide block, high precision ,wearresistance, small resistance, high
speed;arc-gear synchronous belt 3m,stabletransmission, strong shock absorption ability and small noise.
✦Red cross accurate position, convenient and quick in finding engraving and cutting position.
✦Equipment with automatic / manual modulation focused laser head, responsive andaccurate to ensure sculpture quality.

Compared with traditional processing technology, laser rubber seal engraving machine has obvious advantages. Laser cutting combines a high concentration of energy and pressure, enabling stamp engravers to cut smaller and narrower areas of material for engraving

Dowin 1390 Co2 laser cutting machine factory.
*Famous brand CO2 laser tube
*Laser head with auto focus pen
*High precision HIWIN guide rail
*Leadshine 3 phase 57 motors
*Leadshine drivers
*Moving platform controlled by software
*Ruida 6445 software
*S&A brand CW-5200 water chiller
*Double smoke cleaning system
*550W exhaust fan
*008 air pump

Dowin can provide certifications:

FDA Compliant
CE Certification
ISO Quality Certification

The common problems of laser engraving and cutting machine when working are that there is no laser when working, or sometimes there is no laser.
What should the laser engraving and cutting machine do when this problem occurs, how to detect and how to deal with it?
Dowin Laser has a complete service system to assist in solving this problem

1390 laser cutter optional parts:
1. Motorized up-down table.
To increase virtual working distance of Z. For thick materials and rotary attachment.
2. Rotary
Used to engrave round materials, such as bottles.
3. Red dot
For finding the light
4. Auto focusing
Machine adjusts the focal length automatically before engraving and cutting, which replaces manual focusing, improving working efficiency.

When using the rubber laser engraving machine, pay attention to the maintenance of the laser head. The laser head is the main tool for work. In order to prolong the life of the laser head, our small engraving machine should try to rest for about 10-15 minutes after engraving for 50 minutes.

The main configuration:
*Famous brand CO2 laser tube
*Laser head with auto focus pen
*High precision HIWIN guide rail
*Leadshine 3 phase 57 motors
*Leadshine drivers
*Moving platform controlled by software
*Ruida 6445 software
*S&A brand CW-5200 water chiller
*Double smoke cleaning system
*550W exhaust fan
*008 air pump

Dowin adopts ZnSe focusing lens for CO2 laser engraving machine, which has better focusing effect, scratch resistance and long service life.

Main configuration:

*Famous brand RECI CO2 laser tube
*Laser head with auto focus pen
*High precision HIWIN guide rail
*Leadshine 3 phase 57 motors
*Leadshine drivers
*Moving platform controlled by software
*Ruida 6445 software
*S&A brand CW-5200 water chiller
*Double smoke cleaning system
*550W exhaust fan
*008 air pump

Dowin laser stamp engraving machine is small in size and easy to carry. It can easily engrave on rubber, paper, wood and other materials. It has a lifting function and can meet various needs of customers.

Dowin progressive motor, adopts variable current control, saves electric energy, does not need complex parameter adjustment, easy to operate, stable and does not shake when running at high speed, does not lose steps, has faster response, low heat generation, and large torque.

1)Red dot positioning Synchronize with the laser, which make the operation more convenient.
2)Ensure the accuracy higher than similar models on the market.
3) Knives and cellular dual cutting platform can meet the cut requirement of a variety of products.
4)DSP control system and Ruida board can ensure the engraving and cutting task completed quickly at one time.
5)Make the processing of various thickness material more convenient.
6)Wide range of applications: Advertising industry, Office industry, Packing industry, Gift industry, Decoration industry, Printing Industry.

Processing area1300*900mm
Laser tube80W(Option100W/ 130W)
Engraving speed0-60000mm/min
Cutting speed0-10000mm/min
Resolution ratio<0.01mm Location precision<0.01mm Voltage110V±10%/ 220V±10% ,50HZ ~60HZ

The co2 laser engraving machine is an engraving machine using co2 laser technology. This type of laser equipment is a general-purpose model with a rear focus method, small size and high degree of integration.
The laser beam is transmitted and focused on the surface of the material by the optical mechanism, and the material at the action point of the high-energy density laser beam is rapidly vaporized to form pit points, thereby realizing engraving and cutting.

CO2 engraving machine is very efficient. The CO2 engraving machine has no “knife marks” during use, and does not damage the surface of the workpiece

Dowin products are of reliable quality, attention to detail and after-sales service. The hardware accessories of the laser engraving machine are made of high-quality materials, which are durable and not afraid of deformation. Multi-layer electroplating coating, corrosion-resistant and not fading, often maintains luster.

Applicable industries
This type of machine is suitable for clothing, leather, cloth toys, computer embroidery and cutting, electronic appliances, models, handicrafts, advertising and decoration, packaging and printing, paper products and other industries.

The Application of stone laser engraving machine:
It is widely used in cutting, engraving, through-carved, hole drilling on fabric, garment, leather, wood and bamboo, acrylic, craft and gift, marble and granite, ceramic, glass and other non-metal materials. Mainly applicable for engraving for heavy materials, such as gravestone, granite, marble etc.

The principle of laser engraving handicrafts refers to the use of high-energy conspiracy laser beams projected onto the surface of the material, so that the surface of the material can undergo physical and chemical changes, so as to obtain engraving handicrafts with visible patterns.
The engraving machine canbe used in crafts, models, advertising, decoration, electrical appliances, plastic industry acrylic board, medium density decorative board and other non-metal sheet precision cutting.

Advantages of carbon dioxide laser engraving machine:
The non-contact processing method is adopted, which minimizes the thermal influence and avoids the deformation of the processing material.

The configuration of the professional laser stamp engraving machine is:
1.Thicker frame and back door let allow long material pass through
2.Electrical up-down system,Double power supply,step motor,Coreldraw software

The Feature of stamp engraving machine:
1)Perfectly tidy power supply system.The power supply system of the whole machine is strictly in accordance with international standards. Different control power signal lines adopt separate routing design, avoiding electromagnetic interference between various types of signal lines.

2)Adopt high-precision guide rails imported from South Korea.Improve laser engraving and cutting accuracy and ensure that the laser machine runs efficiently and stably for a long time.

3)5mm thick aluminum alloy oxidation work platform, to ensure the level of the work platform, improve the accuracy of object carving.

Rubber stamp engraving machine is mainly application for rubber stamp making , with super accuracy and high precision , engraving and cutting effect very smoothly, no glitch, even if mini letters can show super clear 

With the maturity of the development of laser engraving technology, laser engraving machine engraving seals are widely used for graphic processing of products, and laser engraving machines are rapidly used in various materials that need to be engraved.

The Feature of Dowin co2 laser cutting machine:
1)TAIWAN square rails and belt,Leadshine 57 three compartment stepping motor and 3DM580 Driver.
2)Stainless steel electric ball screw lifting table control by software.
3)Famous YL brand Co2 Laser tube
4)RUIDA 6445 control system.
5)Imported ⅡⅥ adnd Wavelength mirror and lens.
6)Honeycomb or Knife working table.
7)Air Compressor ACO-008,550W Exhaust fan.
8)Red light point,Wifi control.
9)S&A Water chiller CW5200

Laser engraving is to use the computer to control the x-y console to drive the laser head to move, and to control the laser switch as needed. The image information processed by the software has been stored in the computer in a certain way. When the information is sequentially read from the computer, the laser head scans back and forth line by line from left to right and top to bottom along the scanning track.
The 3040 laser engraving machine meets the engraving needs of most materials, such as wood, acrylic, etc.

The CO2 laser engraving machine made by Dowin adopts reci laser tube, which has a fine spot, long life, good stability and fast engraving speed.

The main feature of 130W Co2 laser cutting machine for wood:
✦Drive system with high precision linear guide and slide block, high precision ,wearresistance, small resistance, high speed;arc-gear synchronous belt 3m,stabletransmission, strong shock absorption ability and small noise.
✦Red cross accurate position, convenient and quick in finding engraving and cutting position.
✦Equipment with automatic / manual modulation focused laser head, responsive andaccurate to ensure sculpture quality.

The CO2 engraving machine which has low consumption of tools and equipment has a honeycomb worktable, , and is suitable for hard plates such as acrylic, wood, MDF, etc.

Dowin 1390 co2 laser engraving machine is suitable for cutting and engraving most non-metallic materials, such as paper packaging, plastic products, label paper, leather cloth, glass ceramics, resin plastics, bamboo and wood products, PCB boards, etc.

Dowin CO2 lasers are ideal for laser marking, engraving and cutting systems due to their high performance, reliability and low cost. Dowin Rubber Stamp Laser Engraving Machine Professionally Engrave Stamps with Higher Efficiency

CO2 laser cutting machine has the replaceble base plate, according to the demand of the cutting material, two types are available, the blade board and the honeycomb board.

Applicable Materials
1390 Co2 laser cutting and engraving machine can work on non-metal materials such as double-color sheets ,acrylic ,glass,wood planks,paper,leather,rubber,marble,granite and tiles,etc

The machining accuracy of the CO2 engraving machine can reach 0.02mm, which is precise and meticulous, and has no blade, which is safe and hygienic

The DOWIN black series CO2 laser power supply is currently the most widely used and widely used laser power supply. It has been sold well at home and abroad for more than ten years. It has strong versatility, good compatibility and high security.

Odors and dust will be generated during laser processing of rubber, so it is very important to have a corresponding powerful dust extraction and purification system. It is recommended to use the top-down method for laser engraving to prevent the accumulation of soot particles from affecting the laser engraving effect.

The biggest advantage of laser seal engraving machine when engraving seal is that the size of text and pattern can be controlled, the content can also be changed, and the engraved pattern is also relatively fine.

The 3040 CO2 laser engraver can be used to engrave and cut a wide variety of materials, such as wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics, and glass.
Widely used in advertising, gifts, shoe materials, toys and other industries.
At the same time, the CO2 laser engraving machine has various image formats such as HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI and so on.

The advantages of co2 laser engraving machine processing:
1. Saving and environmental protection: the diameter of the beam and the spot is small, generally less than 0.5mm; the cutting process saves materials and is safe and hygienic;
2. Consistent effect: ensure that the processing effect of the same batch is completely consistent.
3. High-speed and fast: high-speed engraving and cutting can be performed immediately according to the pattern output by the computer.

When making the stamp face, make sure that the design file has been mirrored, otherwise the imprint of the stamp will not be able to be read normally. Using a professional seal engraving machine can maximize the efficiency of seal engraving

The CO2 engraving machine can also engrave plywood, which is a man-made wooden board and one of the commonly used materials for furniture. Carving on plywood is actually not much different from carving on wood, but one thing to pay attention to is that the carving depth should not be too deep