Factory Price Laser Rubber Stamp Machine Laser Engraving Machine Price

1390 Laser engraving cutting machine is generally used in wood products, plexiglass, stone, crystal, Corinne, paper, two-color plate, alumina, leather, resin and so on.

The Application of stone laser engraving machine:
It is widely used in cutting, engraving, through-carved, hole drilling on fabric, garment, leather, wood and bamboo, acrylic, craft and gift, marble and granite, ceramic, glass and other non-metal materials. Mainly applicable for engraving for heavy materials, such as gravestone, granite, marble etc.

This Rubber self-inking stamp laser making engraving machine could both engraving and cutting one time to make a Rubber self-inking stamp, high precision and fast.
Main Technical Parameters of the rubber stamp laser making machine
Processing area DW-3040B
Laser tube 40W (60W option)
Engraving speed 0-300mm/s
Cutting speed 0-500mm/s
Resolution ratio <0.01mm Motor Step motors Voltage 110V±10%/ 220V±10% ,50HZ ~60HZ Minimum character Letter 1.0 x 1.0mm Laser tube's life 5000+ hours Control system Coreldraw (Ruida option) Working table Alumina and Honeycomb working table Graphic Format Supported PLT, DXF, AI, BMP, DST, etc. Cooling system Water pump Standard configurations Air compressor,exhaust fan, water pump , handle up-down included Options Chiller CW-3000,Ruida software,Bracket stand

How you can use Dowin laser laser machine to cut and engrave rubber sheet?
With a laser engraving machine you can cut and engrave texts with particularly small fonts, logos with fine details or even images on rubber. The laser machine enables you to produce stamps efficiently, cost-effectively and in an environmentally-friendly manner. This creates rubber stamps with the highest precision and with a clean, detailed imprint quality. The use of chemicals is therefore unnecessary. You can also laser cut or engrave rubber for many other areas of application, e.g. arts & crafts or outdoor signage.

Machine Features
✦Drive system with high precision linear guide and slide block, high precision ,wearresistance, small resistance, high
speed;arc-gear synchronous belt 3m,stabletransmission, strong shock absorption ability and small noise.
✦Red cross accurate position, convenient and quick in finding engraving and cutting position.
✦Equipment with automatic / manual modulation focused laser head, responsive andaccurate to ensure sculpture quality.

6090 Co2 lazer engraving machine 80W 100W 130W 150W PCB circuit board lazer cutting machine.CO2 laser engraving machine with a working area of 600*900mm. It can be used to engrave and cut non-metallic materials.

—Applicable materials
All Non-metal material such as wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper, leather, rubber, ceramic, glass, etc.
—Applicable industries
Advertisement, arts and crafts, leather, toys, garments, model , building upholster, computerized embroidery and clipping, packaging and paper industry.

The advantages of DW-6040 Laser engraving cutting:
It is a non-contact process.This reduces heat damage to the surrounding area, which increases productivity by decreasing downtime and repair costs

To understand the difference between ordinary engraving machines and laser engraving machines, we must first understand what are ordinary engraving machines and laser engraving machines. Ordinary engraving machine refers to the equipment that uses the tool on the engraving machine to cut and engrave materials; laser engraving machine refers to the equipment that uses the melting, evaporation and photochemical reactions generated by the laser beam on the surface of the material to make the surface of the material turbid and achieve the desired pattern.

Advantages of carbon dioxide laser engraving machine:
The non-contact processing method is adopted, which minimizes the thermal influence and avoids the deformation of the processing material.

Machine Features
✦The drive system adopts high-precision linear guides and sliders, with high precision, wear resistance, low resistance, and fast speed; stable transmission, strong shock absorption capacity, and low noise.
✦The positioning of the red light is accurate, and it is convenient and quick to locate the engraving and cutting position.
✦The laser head is responsive and accurate to ensure the quality of engraving.

With the maturity of the development of laser engraving technology, laser engraving machine engraving seals are widely used for graphic processing of products, and laser engraving machines are rapidly used in various materials that need to be engraved.

The spplicable materials of stamp engraving machine :
Rubber stamps engraving, acrylic engrave or cut, fabrics, leather, paper, bamboo and wooden product, film, canvas, etc.

Applicable Industries:
Advertisement , Garments sampling, Small width tailoring, leather industry, decoration, , packing and printing, model industry, craftwork and gift, etc.

CO2 engraving machine is not limited by the number of processing, for small batch processing services, laser processing is cheaper

The patterns and texts engraved by laser stamps are very fine. Due to the small size after laser focusing, the small heat-affected area and the fine processing, some processes that cannot be achieved by conventional methods can be completed.

Rubber stamps are generally engraved by hand or laser engraved, and most of the stamps are now engraved by laser stamp engraving machines.
The stamp engraved by the laser stamp engraving machine is more fine and suitable for the engraving of complex patterns. Compared with traditional manual engraving, laser stamp engraving machine has higher precision and higher efficiency.

The CO2 laser engraving machine produced by Dowin adopts S&A water cooling machine:
• Provide stable working conditions for laser equipment.
• Water can be used for a long time.
• High heat dissipation capacity, not easy to block.
• Alarm output port can quickly protect sensitive components

The principle of the auto focus pen is to control the automatic lifting and lowering of the Z axis to adjust the focal length, which is used for the automatic electric upper and lower worktable CO2 laser engraving and cutting machine. There are two mounting hole sizes 24mm & 25mm, saving the trouble of manual focusing.

Leather product is widely used in our daily life. How to make eather products are more diversified, choose Dowin laser 6040 laser engraving machine is a good choice. Engrave patter and letter on leather product to achieve leather customization, we believe client can benefit a lot from this set machine

Dowin stone laser engraving machines can engrave stone, granite, and tombstone. Stone laser engraving on stone produces a result similar to sandblasting or acid etching: a surface engraving that gives the impression that the stone has been bleached. Letters, photographs, and logos can be permanently printed on stone.

Machine work with Coreldraw control system , support different kinds of languages. We can import the stamp design into software,setting suitable parameter and to do cutting And engraving , words with different languages, logos, QR code, bar code, patterns etc All work can be done very well.

Features of 100W wood laser cutter engraving machine :
1. Configure high power and quality CWG laser tube, can work over 10000 hours.
2. With function of restoring from poweroff, continuation function from break point.
3. Transmit files directly from Corel draw and Ruida, Photoshop, Lightburn directly.
4. Adopt imported HIIWIN guide rail with high precision.

Feature of 1390 Co2 CNC Laser Engraving Cutting Machine For Leather Fabric
1) Red dot positioning Synchronize with the laser, which make the operation more convenient.
2) Ensure the accuracy higher than similar models on the market.
3) Knives and cellular dual cutting platform can meet the cut requirement of a variety of products.
4) DSP control system and Ruida board can ensure the engraving cutting task completed quickly at one time.
5) Make the processing of various thickness material more convenient.
6) Wide range of applications: Advertising industry, Office industry, Packing industry, Gift industry, Decoration industry, Printing Industry.

The 3040 CO2 laser engraver can be used to engrave and cut a wide variety of materials, such as wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics, and glass.
Widely used in advertising, gifts, shoe materials, toys and other industries.
At the same time, the CO2 laser engraving machine has various image formats such as HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI and so on.

Laser engraving processing as a new processing method, is gradually widely used in leather, textile and garment industry for its processing precision, fast, simple operation, high degree of automation.

The configuration of the professional laser stamp engraving machine is:
1.Thicker frame and back door let allow long material pass through
2.Electrical up-down system,Double power supply,step motor,Coreldraw software

Parameters of laser rubber stamp engraving machine:
Working area: 300mm x 400mm

Laser power: 40w/50w/60w
Laser type: CO2 sealed laser tube, water cooled

In our daily engraving process, the engraving depth of the rubber seal engraved by the laser engraving machine is related to factors such as the absorption of the laser by the engraved material, the power of the laser, and the time of the laser on the engraved material.

If you have any questions, our technicians are available online to guide you remotely (Skype/MSN/What’s app/Tel/Etc).

Co2 1390 CNC Laser Cutting Edge Features:

RUIDA DIGITAL CONTROLLER: The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8.
LINEAR RAIL GUIDING SYSTEM: Equipped with X and Y stepper motors for efficient power transmission between the guide rails with high precision and long service life.
RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine’s path, and identifies positioning sizes, allowing an effortless project setup process.

The Motor and Driver of 1325 laser cutting machine.
Dowin all co2 laser cutting machine use famous brand Leashine motor and driver with high quality.
And if the cusotmers want to custom the machine , Dowin also can produce laser macine to the cusotmers’ need!

1)Red dot positioning Synchronize with the laser, which make the operation more convenient.
2)Ensure the accuracy higher than similar models on the market.
3) Knives and cellular dual cutting platform can meet the cut requirement of a variety of products.
4)DSP control system and Ruida board can ensure the engraving and cutting task completed quickly at one time.
5)Make the processing of various thickness material more convenient.
6)Wide range of applications: Advertising industry, Office industry, Packing industry, Gift industry, Decoration industry, Printing Industry.

Dowin’s laser cutting machine board adopts RDC6445G system, which has better hardware stability and better anti-high voltage and anti-static interference characteristics.

Before using the CO2 laser engraving and cutting machine, read the instructions carefully and understand the basic steps and methods of machine operation.
When using the laser engraving and cutting machine, operate in strict accordance with the instructions of the laser machine, keep the work surface clean, improve work efficiency, and prolong the service life of the CO2 laser engraving machine

Dowin laser CO2 Laser Engraving Cutting Machine Advantage:
1. With a precision famous brand CO2 laser tube, it can process various of non-metallic materials, such as acrylic, wood, MDF,PVC,plastic, leather, rubber, glass, cloth…etc
2. With the international imported component, it makes the machine have a higher accuracy and reliable quality.
3. Machine support rotary function, it can be used to process any cylindrical object, such as cup,bottle,brush pot, musical instrument and so on.
4. This machine can be compatible with windows system, and easy to operate.

Laser belt cutting machines have different specifications, common specifications are 3040, 6040, 6090, 1390 and so on.
Machines of different specifications have different uses. Generally, small laser engraving machines of DOWIN 3040 and 6040 can meet the needs of general engraving items.

The advantages of co2 laser engraving machine processing:
1. Wide range: carbon dioxide laser can engrave and cut almost any non-metallic material. And it’s cheap!
2. Safe and reliable: non-contact processing will not cause mechanical extrusion or mechanical stress to the material. No “knife marks”, no damage to the surface of the workpiece; no deformation of the material;
3. Precise and meticulous: the machining accuracy can reach 0.02mm

Dowin laser is China laser machine manufacturer supply Trophy Medal Logo Engraving Laser Trophies Cup Engraving Machine Cnc Laser Engraver
Laser engraving machine is perfect for engraving a wide variety of trophies, plaques, medals, awards and more. Our machines go through a strict quality control process so you know every engraved, marked, routed or cut item using the proper tools & setting will exude the same quality. We have a variety of systems that can handle flat, curved, odd-shaped, and cylindrical items in a wide range of materials. Our laser engraving machine offer the flexibility, capability and quality you need for all your awards engraving needs.

The advantages of co2 laser engraving machine processing:
1. Wide range: carbon dioxide laser can engrave and cut almost any non-metallic material. And it’s cheap!
2. Safe and reliable: non-contact processing will not cause mechanical extrusion or mechanical stress to the material. No “knife marks”, no damage to the surface of the workpiece; no deformation of the material;
3. Precise and meticulous: the machining accuracy can reach 0.02mm

At present, the materials of seals are mainly rubber, wood, jade, etc. Among these materials, wood and rubber are the most widely used.
Laser engraving machine is used to engrave rubber and wood stamps, with high work efficiency and fast speed

The professional laser seal engraving machine is easy to operate, with standardized fonts, easy to learn and use, free conversion of orthographic, inverse, and yin and yang characters to meet the diverse needs of customers

To understand the difference between ordinary engraving machines and laser engraving machines, we must first understand what are ordinary engraving machines and laser engraving machines. Ordinary engraving machine refers to the equipment that uses the tool on the engraving machine to cut and engrave materials; laser engraving machine refers to the equipment that uses the melting, evaporation and photochemical reactions generated by the laser beam on the surface of the material to make the surface of the material turbid and achieve the desired pattern.

CO2 laser engravers are very good at cutting and engraving non-metallic materials, the materials that can be cut and engraved include:
wood, acrylic, paper, cloth, epoxy resin, plastic, rubber, crystal, etc.
CO2 laser cutting machines are widely used in clothing, leather, cloth toys, computer embroidery and cutting, electronic appliances, models, handicrafts, advertising and other industries, as well as decoration, packaging and printing, paper products and other industries.

Machine work with Coreldraw control system , support different kinds of languages. We can import the stamp design into software,setting suitable parameter and to do cutting And engraving , words with different languages, logos, QR code, bar code, patterns etc All work can be done very well.

CO2 laser cutting machine has a good Transmission System
Transmission with high speed. this transmission makes materials a better effects, high stability, cutting edge smooth, accurate.

Machine Features
✦The drive system adopts high-precision linear guides and sliders, with high precision, wear resistance, low resistance, and fast speed; stable transmission, strong shock absorption capacity, and low noise.
✦The positioning of the red light is accurate, and it is convenient and quick to locate the engraving and cutting position.
✦The laser head is responsive and accurate to ensure the quality of engraving.

CO2 laser engraving machine can engrave LOGO trademark, text, two-dimensional code, pattern, serial number, symbol, name, anti-counterfeiting code, code, barcode on wood products, bamboo products, leather, paper and other products only through computer control Wait

CO2 laser cutting machine has the replaceble base plate, according to the demand of the cutting material, two types are available, the blade board and the honeycomb board.

Using a laser stamp engraving machine can minimize production costs and improve production efficiency. The use of stamp laser marking machine can be mass-produced to meet the increasing daily needs

CO2 engraving machine is not limited by the number of processing, for small batch processing services, laser processing is cheaper

1390 Co2 laser cutting machine is an economical CO2 laser engraving machine and cutting machine. Equipped with a special machine protection cover, which not only guarantees the personal safety of the operator, and it also makes the entire processing production more environmentally friendly. Besides that the protective cover can be removed, so it can meet the different processing needs of users.

Dowin newly plexiglass 6090 laser engraving machine 80W 100W 130W Co2 lazer cutting machines are a ideal product to process wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics and glass.

Stone Laser engraving Machine
Model:DW-6090/DW-1390
Working area:130cm*90cm
Laser power:80W-150W
Laser type:CWG CO2 laser tube,water-cooled
Engraving speed:0-60000mm/min
Laser Output:1-100%software setting
Resetting positioning accuracy:≤±0.01mm
Power supply:220V/50HZ , 110V/60HZ
Operating temperature:0 – 45°C
Operating humidity:5 – 95%
Min. shaping character:English 1.0 x 1.0mm
Graphic format supported:BMP, PLT, DST, DXF, AI
Software supported:Ruida, PhotoShop, Lightburn
Driving system：Leadshine 57 stepper motor

The patterns and texts engraved by laser stamps are very fine. Due to the small size after laser focusing, the small heat-affected area and the fine processing, some processes that cannot be achieved by conventional methods can be completed.

The Dowin laser seal engraving machine is specially designed for engraving seals. The system and configuration of the laser engraving machine are converted into seal engraving design. The engraving accuracy and engraving effect are good, which can meet the various needs of customers.

The application of 1325 co2 laser cutting machine
1) Acrylic engraving and cutting
2) Wood/MDF engraving and cutting
3) Leather engraving and cutting
4)Paper engraving and cutting
5) Rubber sheet engraving and cutting
6) Double color board & coated board engraving
7) Marble and stone engraving

Laser engraving is to use the computer to control the x-y console to drive the laser head to move and control the switch of the laser as required. The image information processed by the software has been stored in the computer in a certain way. When the information is read from the computer in sequence, The laser head scans back and forth line by line from left to right and top to bottom along the scanning track.
The 3040 laser engraver meets the engraving needs of most materials

Laser engraving machines are mainly divided into metal laser engraving machines and non-metal laser engraving machines.
Engraving seals generally use non-metallic laser engraving machines, CO2 laser engraving machines.
The engraving effect of the Dowin laser engraving machine is very good and delicate, which is no less than the hand-carved craft water.

If there is a need to engrave and cut non-metallic materials, CO2 laser engraving and cutting machine is a good choice. Using a laser engraving machine to engrave rubber stamps has higher precision and can be used to engrave complex patterns.