laser engraving machine 6040

The laser engraving machine is suitable for processing most non-metallic materials such as acrylic and MDF; it can be widely used in advertising signs, architectural models, and craft gifts.
Among them, MDF, as a versatile material, is widely used in furniture, building decoration, audio equipment, handicraft production and other industries.
Engraving MDF with a laser is more efficient than cutting it with a traditional knife. The traditional method is not only labor-intensive and inefficient, but also difficult to process complex graphics, which has great defects.

Laser engraving machine is suitable for processing most non-metallic materials such as fabric, acrylic, wood, leather, paper, rubber, plastic, glass, ceramics and marble; it can be widely used in advertising signs, architectural models, craft gifts, seal making, clothing and apparel , Printing and packaging, industrial proofing and other industries.
MDF is a board made of wood fiber or other plant fiber, prepared from fiber, applied with synthetic resin, and pressed under the condition of heating and pressure.

6040 engraving machine can cut any complex shape; high efficiency, low cost, computer design graphics, can cut any shape and size of lace. Fast development speed: Due to the combination of laser and computer technology, users can realize laser engraving output as long as they design on the computer. The machine engraving accuracy and cutting speed are very good, and it also has the characteristics of safe operation and simple maintenance.

The laser engraving machine uses the thermal energy of the laser to engrave the material, and the laser in the laser engraving machine is its core. Generally speaking, laser engraving machines are used in a wider range, with higher engraving precision and faster engraving speed. Moreover, compared with the traditional manual engraving method, laser engraving can also make the engraving effect very delicate, which is no less than the craftsmanship level of manual engraving.

Notes on using 6040 CO2 engraving machine
1. The initial user should first perform red light positioning when performing irregular processing.
2. When processing veneers and volatile materials, adjust the amplitude of the water to be less than 1mm.
3. When cutting, use the workpiece holder to be more than 2 cm away from the worktable.
4. Cleaning of reflective lens and focal length lens: Pinch the reflective lens with two fingers. The other hand holds the camera lens cleaning paper to clean the lens.

Notes on using 6040 CO2 engraving machine
1. When using auto focus, pay attention to the fact that the auto focus rod must be fastened, otherwise the work surface will hit the laser.
2. When the laser engraving machine is working, it is forbidden to open the cover.
3. Turn on the smoke exhaust and blowing equipment during processing.

Principle of CO2 laser cutting machine: In a CO2 laser cutting machine, light is produced when an electric current is passed through a gas-filled tube with mirrors at both ends. One mirror is fully reflective, while the other allows some light to pass through. These mirrors guide the laser beam into the material to be cut. This gas is usually a mixture of carbon dioxide, nitrogen, hydrogen and helium.
Any light produced by a Co2 laser is very powerful compared to ordinary light. This is because there are mirrors at the end of the gas tube. These mirrors reflect most of the light passing through the tube and cause the light waves to increase in intensity.

Trends in Chinese laser equipment:
1) High-speed and high-precision laser cutting machines have created favorable conditions for high-speed and high-precision laser cutting equipment due to the improvement of high-power laser beam patterns and the application of 32-bit microcomputers.
(2) Large-scale laser cutting machines for thick plate cutting and large-size workpiece cutting With the increase of laser power available for laser cutting, laser cutting is developing from sheet metal processing of light industrial thin plates to heavy industrial thick plate cutting.

6040 CO2 laser engraving machine is widely used in industry
Application industry:
Kitchen utensils metal sheet cutting, advertising characters, large-format truncation, clothing proofing, leather industry, shoe industry, decoration industry, furniture industry, packaging and printing industry, model industry, craft gift industry, etc.
Applicable materials:
Sheet metal, acrylic, plexiglass, glass, cloth, leather, paper, bamboo and wood products, film, canvas, etc.

DOWIN CO2 laser engraving and cutting machine has obvious advantages. The optimized design of the mechanical structure saves space, and the structure is not deformed, and the cutting precision is high. Taiwan imported square linear guide, long service life.
With automatic focus, red light positioning and other functions, the accuracy of the machine is improved and its functions are maximized. Able to work on most non-metallic materials, saving time and efficiency.

The 6040 laser engraving machine is widely used, and it is commonly used in the advertising industry and the clothing industry. The advantage of laser processing is that it can quickly engrave and hollow out various patterns on the surface of various upper materials. Since laser processing is a non-contact processing method, it will not produce any external deformation on the upper. It also has many advantages such as high engraving precision, hollow without burrs, and can process any shape.

The CO2 laser engraving machine has low energy consumption and high working efficiency. The diameter of the beam and spot of the 6040 laser engraving machine is small, generally less than 0.5mm, which saves materials and is safe and hygienic. When the engraving machine is working, it can immediately engrave and cut according to the pattern output by the computer, and the work efficiency is high.

The 6040 CO2 engraving machine is widely used in the market, and can be used for plexiglass laser engraving (cutting), two-color plate engraving, laser production of various plaques, all kinds of leather, clothing, fabric textile patterns, artificial leather cutting and pattern engraving and cutting.
6040 laser engraving machine has several types of laser tube RECI and CDWG, complete product models

DOWIN CO2 engraving machine has a unique exhaust system to effectively protect the laser head and make the maintenance of the laser head more convenient. The engraving machine has a special metal lens to make the focused laser beam stronger and thinner.
Mainly used in craft gifts industry: crystal engraving, bamboo slip laser engraving, woodblock book laser engraving, mahogany laser engraving, two-color plate engraving, box-shaped crafts laser engraving, chessboard laser engraving, marble engraving.

The DOWIN CO2 laser engraving and cutting machine has obvious advantages. The optimal design of the mechanical structure and the smallest overall size of the machine not only saves your precious space, but also the structure should not be deformed and the cutting precision is high. Taiwan imported square linear guide, long service life.

6040 CO2 engraving machine has almost no consumption when working, high processing efficiency, 10 to 15 of manual engraving, high precision, low cost and good printing effect.
CO2 engraving machine has been widely used in printing and packaging industry, craft gift industry, advertising industry and leather garment industry in recent years

The 6040 laser engraving machine is mainly used to engrave and cut non-metallic materials, such as wood, acrylic, stone and so on.
Laser engraving machines are mastered and used by many small and medium-sized handicraft processors, especially non-metallic laser engraving machines and non-metallic marking machines are widely used in wood products, glass, bamboo slips and bamboo tubes, folk paper-cuts, shadow play and other processing industries.

Laser engraving machines can be subdivided into non-metallic laser engraving machines, such as wooden handicraft engraving machines, stone shadow engraving machines, etc.
The 6040 laser engraving machine is mainly used to engrave and cut non-metallic materials, such as wood, acrylic, stone and so on.

CO2 lasers can engrave and cut almost any non-metallic material. The price of CO2 engraving machine is also relatively cheap, and this is used in many industries, such as advertisement, arts and crafts, leather, toys, garments, model, building upholstery, computerized embroidery and clipping, packaging and paper industry

The principle of laser engraving is that the laser beam is transmitted and focused on the surface of the material by the optical mechanism, and the material at the action point of the high-energy density laser beam is rapidly vaporized to form pits.
Mainly used in the engraving and cutting of non-metallic materials, such as wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper