Factory Supply 3040 CO2 Laser Cutting Machine Price Laser Cutter And Engrver

If 1325 Co2 laser cutting machine you are looking at now can not meet your actual requirement, welcome to send your detailed requirement to us, we will send you Best Price and Full details thank you !(For more size,we have:1600*1000mm, 1800*1200mm, 1300*2500mm, 1500*3000mm; we also have smaller size like 300*200mm, 300*500mm, 600*400mm, 600*900mm and so on)

CO2 laser cutting machine has obvious advantages compared with traditional cutting methods: fast cutting speed, high cutting efficiency, small heat-affected zone, narrow incision, suitable for cutting non-metallic materials

Auto cloth laser cutting machine with Trocen software,CCD camera ,auto feeding system and water chiller .Dowin factory products all kinds of cloth cutting machine with auto feeding system and also can customize the machine according to your needs.

In addition to making crafts and cutting, the CO2 engraving machine can also be used to engrave mobile phone cases, and the laser engraving and cutting machine can be used to process customized mobile phone cases, which can maximize the display of personalization and achieve the high-precision level of engraving.

Two different models 1390 100W co2 laser cutting machines, one is slim model with around 15cm up-down table, can pass 90cm door and can load 24 sets in one 40HQ. Other is standard model with around 30cm up-down table and with 4 cbm.

✦We will give you 365 days warranty, so you don’t have to worry about the after-sales.
✦We will also send you new parts if there’s any parts broken by non-human issues.
✦We have been inspactaed by one of the world’s largest institutions of certifications,Alibaba Vertitied Supplier are what you should consider first,it means good product,first class service and reasonable price !

Processing area 1300*900mm
Laser tube 80W(Option100W/ 130W)
Engraving speed 0-60000mm/min
Cutting speed 0-10000mm/min
Resolution ratio <0.01mm Location precision <0.01mm Voltage 110V±10%/ 220V±10% ,50HZ ~60HZ Cutting thickness Depends on your materials

Dowin air compressors save an average of 40% in energy savings during periods of fluctuating production demand, with a wide adjustment range. Smart controller controls motor speed and efficient frequency converter. Normal operation does not waste idling time. Eliminates peak current losses during startup.

DOWIN 1814 laser cutting machine is widely used in the textile and garment industry, processing various garment materials, cutting fabrics, fabrics, clean cloth, non-woven fabrics, clothing accessories, trademark cutting, etc., with high cutting precision and high speed.
Parameters of laser cloth cutting machine:
Processing area ：1600*1000mm/1800*1400mm
Auto feed cutting table：yes
Cutting Speed: 0-18000mm/min
Camera: Canon

Dowin 1390 co2 laser engraving machine is suitable for cutting and engraving most non-metallic materials, such as paper packaging, plastic products, label paper, leather cloth, glass ceramics, resin plastics, bamboo and wood products, PCB boards, etc.

Laser machines are machines that use lasers to work. The advantages and characteristics of laser machines determine that the machines can be widely used in many industries.

The 1610 laser cutting machine is mainly used in the fabric cutting industry, cutting sportswear, ready-to-wear, etc.
Parameters of laser cloth cutting machine:
–Motion System: Step motor / Servo motor
–Positioning Accuracy: ±0.1mm
–Cooling System: Constant temperature water chiller
–Exhaust System: 550W / 750KW Exhaust fan

CO2 Laser Engraving & Cutting Machine is a laser engraving machine system equipped with CO2 laser tube for engraving on materials such as wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics and glass.
The main application industries are advertising, gifts, shoe materials, toys, etc.
CO2 laser engraving and cutting machines generally support various graphic formats such as HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI, etc., which are convenient for engraving and cutting work.

1814 CCD laser cloth cutting machine adopts non-contact processing method, no tool loss; it will not crush and damage the surface of the material, and maintain the material characteristics.
feature:
– The effective cutting area is 1800mm*1000mm, 1600mm*1000mm
The machine can cut any pattern of fabrics in the cutting area, the cutting edge is smooth, the edge is automatically sealed, and the edge is not loose.
– Conveyor table ensures smooth cutting of fabrics.

How to choose a laser marking machine?
When choosing a laser marking machine, in addition to considering the price and function of the machine, the most important thing is the working area of the machine.
Choosing the model and power of the laser engraving machine that suits you can not only save money, but also meet your own cutting needs.
Generally speaking, the working area of the laser engraving machine is 600mm×900mm, 1300mm×900mm, etc., choose according to the size you need

Advantages of Dowin co2 laser engraving:
1. Saving environmental protection: the diameter of light beam and spot is small, generally less than 0.5mm; cutting and
processing saves materials, safety and health;
2. Consistent effect: ensure that the processing effect of the same batch is completely consistent.
3. High speed and fast: high speed carving and cutting can be carried out immediately according to the drawings output by the computer.

DOWIN Big vision auto Cloth laser cutting machine with ccd camera to one time realization the high precision imaging, which is including the large-format and multi-pattern.The characteristics of these auto cloth cutting machine, mutual recognition of disposable cutting multiple pattern, automatic find the border to correct the flexible and variability image, perfect solve the problem caused by material deformation and stretching. This machine adopting high precision stepper motor, automatic feed, automatically capture the border and cutting speed is 2.5 times than of the traditional, which is the best choice of modern high-speed fully automatic large enterprise.

The advantages of CO2 laser engraving and cutting machine are very obvious, clean, safe and pollution-free. The operator’s working environment has been greatly improved, and laser engraving and cutting machines are replacing some traditional cutting process methods.

The CO2 engraving machine has three mirrors and one focusing mirror, and adopts the configuration of “three mirrors and one gathering”.
High-quality focusing lens and reflector optical path design, optical structure design.

The Application of Auto Cloth Cutting Machine:
CCD laser cutting machine is equipped with advanced Vision system.Camera auto positioning and Laser cutting applied on printed fabric, such as digital printed apparel, sublimated sports garment, cycling clothes, racing suits, swimming suit, printed toys, carpet, home furnishing, banners, flags and so on

The carbon dioxide engraving machine is widely used in life and has become a very common equipment in our daily work. It is mainly used in the advertising industry, handicraft industry, mold industry, construction industry, printing and packaging industry, wood industry, decoration industry, leather industry… …

The laser engraving machine is suitable for processing most non-metallic materials such as acrylic and MDF; it can be widely used in advertising signs, architectural models, and craft gifts.
Among them, acrylic is also called PMMA or plexiglass, which is widely used in construction, advertising, transportation, lighting, medicine and other industries. Compared with traditional cutting methods, the use of CO2 laser cutting and engraving machines usually has the following advantages: fast cutting speed, high flexibility, good quality, clean edges (no polishing required), easy operation, low cost.

–Application of laser cloth cutting machine:
Laser fabric cutting machine is mainly used in cotton, linen, leather, paper, chemical fiber and other textile and clothing fabrics
–Laser cloth cutting machine is mainly used in the cloth industry:
Clothing, embroidery cutting, cloth toys, paper products, leather goods industry, model industry, etc. need large-format material cutting, engraving and other industries

The Main Features of 1390 laser cutter 100w
1) Ruida 6445 controller + Hiwin guide rail + Leadshine motor and driver + American ⅡⅥ imported focus lens.
2) Front to rear design, suitable for large materials
3) CWG Laser tube or Reci tube optional ( 10000 hours work life-span ).
4) Electrical up and down blade work table, 1300mm*900mm work area, lift distance 300mm

CO2 laser cutting machine Yongchang is used to engrave and cut non-metallic materials, such as wood, acrylic, etc., so CO2 laser engraving and cutting machine is also called wood laser cutting machine or acrylic laser cutting machine

Dowin laser fabric cutting machine is a machine specially designed for fabric cutting. It is equipped with automatic feeding device and camera, which can maximize cutting efficiency and reduce production costs.
Minimum shaping character:   Chinese character 2mm/ letter 1mm
Resetting positioning accuracy:  ±0.01mm
Voltage:  Ac220v±10%,50HZ/60HZ
Graphic Format Supported:  BMP,HPGL (PLT), DXF, G-CODE, DST,AutoCAD, CorelDraw, CAD CAM, AI, Photoshop

The Samples of 1390 Co2 laser cutter.
The common processing materials of co2 engraving machine include acrylic, glass, wood, leather, cloth, plastic, two-color board, horn, cardboard, MDF, marble, and other non-metallic materials. And widely used in advertising processing, gift processing, packaging engraving, leather processing, fabric proofing, seal engraving, product marking, seal engraving and many other industries.

The Dowin 1610 laser cloth cutting machine is flexible in cutting and can meet the cutting requirements of customers. The 1610 automatic feeding laser cloth cutting machine realizes fine and high-efficiency cutting.
When the traditional cutting machine cuts various fabrics, the production cost is too high, the production cycle is long, and it is very inconvenient to modify the size, and it cannot meet the cutting of some complex geometric figures such as sharp corners encountered in the production process.

Machine Features of the 1610 Laser Fabric Cutting Machine:
–1610 laser cutting machine can automatically cut graphics to achieve infinite length material cutting
— 1610 laser cloth cutting machine is equipped with a crawler-type work platform with a positioning accuracy of 0.1mm
–The laser cloth cutting machine has a professional exhaust system to ensure perfect cutting effect and keep the working environment clean and tidy

Application and sample of 100W 130W 150W Co2 laser cutter:
1. The 1390 co2 laser cutter engraving machine co2 can engrave wood, bamboo, Ivory, bone, rubber, leather, marble, shell and cut paper, acrylic, felt etc.
2.Mainly used in large plastic character cutting, color plate engraving, organic glass engraving and cutting, sign engraving, crystal engraving, trophy engraving etc.
3.Leather Clothing Processing Industry: engraving and cutting complex patterns on genuine leather, synthetic leather, leather, woolens, clothing, furnishings, glove, handbag, shoes, hats, toys, etc.

*Famous brand CO2 laser tube
*Laser head with auto focus pen
*High precision HIWIN guide rail
*Leadshine 3 phase 57 motors
*Leadshine drivers
*Moving platform controlled by software
*Ruida 6445 software
*S&A brand CW-5200 water chiller
*Double smoke cleaning system
*550W exhaust fan
*008 air pump

When the traditional cutting machine cuts the cloth, the incision is rough, the cutting precision is low, and the speed is slow, which is not conducive to improving the work efficiency.

The 1610 Laser Fabric Cutting Machine uses laser cutting for faster and more precise cutting.

The non-woven fabric of the clean cloth cut by the 1610 laser cloth laser machine does not turn yellow, and the edges are automatically closed and not scattered, not deformed, not hard, and the size is consistent and accurate.

Principle of CO2 laser cutting machine: In a CO2 laser cutting machine, an electric current passes through a gas-filled tube with mirrors at both ends to generate light. One mirror is fully reflective, while the other allows some light to pass through. These mirrors direct the laser beam into the material to be cut.
The 1390 laser engraving and cutting machine is mainly used in the clothing industry, printing industry and advertising industry in industry.

Power:
The integrated HY/ZY power supply features increased response speed, dependable performance, and cutting power – it’s beaming with possibilities!
A secondary LCD display panel monitors the electric current and auto-judges fault, reducing potential damage to the laser tube and power supply.
Cut up to 28 thick acrylic/plexiglass
Uses standard 110V/220V AC power connection

1390 Co2 laser cutter
—Applicable industries
Advertisement, arts and crafts, leather, toys, garments, model , building upholster, computerized embroidery and clipping, packaging and paper industry.

With the increase of market demand, 1610 automatic feeding laser fabric cutting machine is increasingly used in fabric cutting.
Dowin 100w 1610 laser fabric cutting machine is equipped with automatic feeding device, which eliminates the need for manual labor, maximizing labor savings and reducing production costs.

The Dowin Acrylic Laser Cutting Machine Application:
It is widely used in electronic, craft and gift, garment, leather, toy, computerized embroidery, packing and printing, shoe making, furniture, advertising industries ect.
Application:
1) Acrylic engraving and cutting
2) Wood/MDF engraving and cutting
3) Leather engraving and cutting
4)Paper engraving and cutting
5) Rubber sheet engraving and cutting
6) Double color board & coated board engraving
7) Marble and stone engraving

DW-1814 1610 laser fabric cutting machine is used for embroidering trademarks, cycling clothes, sportswear, swimwear and other printed fabrics, leather, fabrics, plush toys, clothing patterning and other fabrics.
*The camera is fully automatic positioning, automatic edge finding and cutting, and the cutting edge is smooth and not focused:
*Software intelligently handles printing deformation, flexible cutting;
* It can be processed continuously for 24 hours without manual pattern making, saving materials.

CO2 Laser Engraving & Cutting Machine is a laser engraving machine system equipped with CO2 laser tube for engraving on materials such as wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics and glass.
The main application industries are advertising, gifts, shoe materials, toys, etc.
CO2 laser engraving and cutting machines generally support various graphic formats such as HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI, etc., which are convenient for engraving and cutting work.

High Quality Laser Cutting Machine For Applique 1814 1610 1825 Fabric Cutting Machine Label Laser Cutter
Dowin laser fabric cutting machines are widely used in the clothing industry, processing various clothing materials, cutting fabrics, fabrics, clothing, trademarks, etc.
Laser fabric cutting has many advantages:
【1】Automatic feeding without manual operation, saving time and effort
【2】Saving materials and reducing waste
【3】 The laser head cuts flexibly and is not affected by the pattern

Main Feature:
1)TAIWAN square rails and belt,Leadshine 57 three compartment stepping motor and 3DM580 Driver.
2)Stainless steel electric ball screw lifting table control by software.
3)Famous YL brand Co2 Laser tube
4)RUIDA 6445 control system.
5)Imported ⅡⅥ adnd Wavelength mirror and lens.
6)Honeycomb or Knife working table.
7)Air Compressor ACO-008,550W Exhaust fan.
8)Red light point,Wifi control.
9)S&A Water chiller CW5200

The advantages of co2 laser engraving machine processing are reflected in the following points:

1. Energy saving and environmental protection: the beam and spot diameter of the co2 laser engraving machine are small, generally less than 0.5mm; the cutting process saves materials, is safe and hygienic;
2. Consistent effect: ensure consistent processing effect of the same batch.
3. High-speed and fast: the co2 laser engraving machine can immediately perform high-speed engraving and cutting according to the pattern output by the computer.

The Dowin fabric laser cutting machine can automatically typeset, according to the most material-saving method, saving time and effort, saving materials and reducing waste.
Laser cutting machine has the advantages of convenience, quickness, flexible transformation, precision and efficiency, energy saving and environmental protection in clothing fabric cutting, so it is favored by users in the textile and garment industry.

The Advantage of Cloth Cutting Machine:
-High precision: can cope with complex graphics to achieve high-precision cutting, deformation matching algorithm, the deformation can be precisely cut format
-Saving materials and environmental protection: multi-model cut and arranged parallel algorithms to improve efficiency, save materials, automatic suction humidity and significantly improving the working environment.

Dowin Auto cloth cutting machine with auto feeding system fixed with a selective rolling & automatic feeding system, which make the whole cloth processing steps finish in one time.
Dowin Auto cloth cutting machine is suitable for engraving and cutting on very long work piece, such as one roller of cloth,fabric, leather, garment.

DOWIN CO2 engraving machine has a unique exhaust system to effectively protect the laser head and make the maintenance of the laser head more convenient. The engraving machine has a special metal lens to make the focused laser beam stronger and thinner.
Mainly used in craft gifts industry: crystal engraving, bamboo slip laser engraving, woodblock book laser engraving, mahogany laser engraving, two-color plate engraving, box-shaped crafts laser engraving, chessboard laser engraving, marble engraving.

What should be done for the daily maintenance of the laser cutting machine?
Laser engraving machines are widely used in engraving and cutting of non-metallic materials,
The daily maintenance of the laser engraving and cutting machine requires daily inspection of the machine tool. What are the steps of daily inspection? let’s go into detail

Dowin laser fabric cutting machine is different from traditional fabric cutting. Dowin laser printing fabric cutting machine is cost-effective, and the cutting efficiency is much higher than the traditional cutting method.

In recent years, with the wide application of laser engraving machines, laser engraving technology has been gradually applied to printing plates in the printing and packaging industry.
The most common packaging for CO2 laser engraving and cutting machines in the printing industry is carton packaging.

6090 100W CO2 laser engraving cutting machine is a ideal product to process wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics and glass.

Dowin Co2 Laser Cutting Machine 1390 Features:
Adopt famous brand CWG laser tube and more stable beam.
With the function of restoring from power off continuation on break point.
Advanced DSP control system, professional motion control chip, consecutive, high-speed curve cutting and the shortest path selection function improve the efficiency.
Red light positioning device indicates the location of laser head, eliminate the trouble about manual positioning.

The working platform of the Dowin laser automatic feeding cloth cutting machine is easy to maintain and maintain, has a long service life, strong stability, low cost, and can work for a long time.
Compared with traditional cutting machines, DW-1610 automatic feeding laser cloth cutting machine has higher cutting efficiency, reduces labor usage, and greatly saves manpower and machine adjustment time

Advantages of CO2 laser cutting machine
1. Fast cutting speed
2. High cutting efficiency
3. Small heat affected zone
4. Narrow incision
5. Suitable for cutting non-metallic materials
6. Not affected by workpiece shape
7. Save material and labor

The main configuration:
*Famous brand CO2 laser tube
*Laser head with auto focus pen
*High precision HIWIN guide rail
*Leadshine 3 phase 57 motors
*Leadshine drivers
*Moving platform controlled by software
*Ruida 6445 software
*S&A brand CW-5200 water chiller
*Double smoke cleaning system
*550W exhaust fan
*008 air pump

Billboards, medals, lamps, aquariums, accessories, etc. are commonly seen in life. These are all irradiated by the acrylic laser cutting machine to the surface of the workpiece with a laser beam, so that the workpiece reaches the melting point or boiling point, and the high-pressure gas coaxial with the beam will melt. or vaporize and blow away

DOWIN 1814 laser cutting machine is widely used in the textile and garment industry, processing various garment materials, cutting fabrics, fabrics, clean cloth, non-woven fabrics, clothing accessories, trademark cutting, etc.
Laser equipment has many unique advantages, such as the new automatic feeding laser cutting machine, automatic feeding without manual operation, saving time and effort.

The 1610 laser fabric laser cutting machine is an industrial product, and the Dowin laser fabric cutting machine is an automatic feeding fabric cutting device specially designed for the garment industry and the cutting and production of plush fabrics.

The 100w 130w laser fabric cutting machine is equipped with a feeding device, a sealing range hood, etc., which can realize the automatic cutting of coil materials, and can cut any pattern of various clothing fabrics.

The features of cloth cutting machine:
Configuration 1800W pixel digital camera, to achieve full-page second shot function, hundreds of samples, shoot second, one second match of advanced vision lighting system, effective guarantee uniformity of brightness of the visual field