4030 Laser Engraving and Cutting Machine For Wood MDF Acrylic

CO2 engraving machines are widely used, and CO2 lasers can engrave and cut almost any non-metallic material, such as arcylic , wood, leather.

Main Features of Dowin dw-1390 laser engraving machine
80W CO2 LASER ENGRAVING MACHINE ENGRAVER
Control system:Ruida software(Lightburn supported)
Working size:130×90cm
Laser tube type: Co2 Glass sealed laser tube
Laser power: 80W/100W/130W/150W/180W…
Driver type: Leadshine Stepping Motor

Advantages of carbon dioxide laser engraving machine:
The work efficiency is 3-5 times that of the traditional marking process, which greatly improves the production efficiency and saves the processing time

Feature of 1390 co2 laser cutter engraving machine:
1. CWG laser tube with high working efficiency for laser cutting engraving machine.
2. Good quality and elastic belt transmission eases the shock and vibration while working, drive quickly with little noise.
3. The laser cutting engraving machine also adopts high-end technology, the best engraving and scanning accuracy, it can clearly engrave on 1mm letters.
4.Stable HY&ZY laser power supply.

Processing area 1300*900mm
Laser tube 80W(Option100W/ 130W)
Engraving speed 0-60000mm/min
Cutting speed 0-10000mm/min
Resolution ratio <0.01mm Location precision <0.01mm Voltage 110V±10%/ 220V±10% ,50HZ ~60HZ Cutting thickness Depends on your materials

Compared with traditional processing technology, laser rubber seal engraving machine has obvious advantages. Laser cutting combines a high concentration of energy and pressure, enabling stamp engravers to cut smaller and narrower areas of material for engraving

1)Red dot positioning Synchronize with the laser, which make the operation more convenient.
2)Ensure the accuracy higher than similar models on the market.
3) Knives and cellular dual cutting platform can meet the cut requirement of a variety of products.
4)DSP control system and Ruida board can ensure the engraving and cutting task completed quickly at one time.
5)Make the processing of various thickness material more convenient.
6)Wide range of applications: Advertising industry, Office industry, Packing industry, Gift industry, Decoration industry, Printing Industry.

Feature of 1390 co2 laser cutter engraving machine:
1. CWG laser tube with high working efficiency for laser cutting engraving machine.
2. Good quality and elastic belt transmission eases the shock and vibration while working, drive quickly with little noise.
3. The laser cutting engraving machine also adopts high-end technology, the best engraving and scanning accuracy, it can clearly engrave on 1mm letters.
4.Stable HY&ZY laser power supply.

Odors and dust will be generated during laser processing of rubber, so it is very important to have a corresponding powerful dust extraction and purification system. It is recommended to use the top-down method for laser engraving to prevent the accumulation of soot particles from affecting the laser engraving effect.

Suitable material
Wood products, paper, leather, cloth, plexiglass, epoxy resin, acrylic, wool, plastic, rubber, ceramic tile, crystal, jade, bamboo products and other non-metallic materials.
High-power CO2 lasers can also cut metal materials.

At present, the materials of seals are mainly rubber, wood, jade, etc. Among these materials, wood and rubber are the most widely used.
Laser engraving machine is used to engrave rubber and wood stamps, with high work efficiency and fast speed

Dowin 1390 co2 laser cutting machine can use Wifi control, no need the wire to connect the computer. So one computer can control many machines .
DW-1390 100w laser machine for cutting and engraving
Applicable materials:
wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper, leather, rubber, ceramic, glass and other nonmetal materials.

The principle of laser engraving is that the laser beam is transmitted and focused on the surface of the material by the optical mechanism, and the material at the action point of the high-energy density laser beam is rapidly vaporized to form pits.
Mainly used in the engraving and cutting of non-metallic materials, such as wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper

Applicable Materials
1390 Co2 laser cutting and engraving machine can work on non-metal materials such as double-color sheets ,acrylic ,glass,wood planks,paper,leather,rubber,marble,granite and tiles,etc

The laser cutting and engraving machine can work on crylic, plywood, wood, leather, cloth, plastic, glass(engraving only), double layer plastic, maylar, pet film and so on
nonmetal materials, if metal with coating or Alumina also can be engraved.

The features of 1390 Co2 laser cutting machine co2 laser cutter.
1)TAIWAN square rails and belt,Leadshine 57 three compartment stepping motor and 3DM580 Driver.
2)Stainless steel electric ball screw lifting table control by software.
3)Famous YL brand Co2 Laser tube
4)RUIDA 6445 control system.
5)Imported ⅡⅥ adnd Wavelength mirror and lens.
6)Honeycomb or Knife working table.
7)Air Compressor ACO-008,550W Exhaust fan.
8)Red light point,Wifi control.
9)S&A Water chiller CW5200

The red light indicator of Dowin laser engraving machine adopts imported laser diode and optical lens. The light spot is clear, the divergence is low, the collimation is good, the volume is small, and the industrial applicability is strong.

The Package of 1390 Co2 laser cutting machine Includes:
1 x Laser Engraver Machine
1 x Water Chiller
2 x Water Hoses
1 x Grounding Wire
1 x Exhaust Fan
1 x USB Cable
1 x USB Drive with Software
10 x Hex Wrenches
1 x Double-sided Tape
1 x Power Cord
1 x Accessory Bag
2 x Keys
1 x Silicone Sealant
1 x Instruction Manual

Advantages of Dowin co2 laser engraving:
1. Saving environmental protection: the diameter of light beam and spot is small, generally less than 0.5mm; cutting and
processing saves materials, safety and health;
2. Consistent effect: ensure that the processing effect of the same batch is completely consistent.
3. High speed and fast: high speed carving and cutting can be carried out immediately according to the drawings output by the computer.

Dowin’s CO2 laser engraving machine is equipped with a rotating shaft, which has stable performance, can work for a long time, simple operation, high engraving efficiency, and can easily engrave cylindrical objects.

Laser engraving and processing of rubber requires relatively high laser power to achieve a certain level of production efficiency. The higher the laser power, the faster the laser engraving speed.

Dowin’s laser cutting machine board adopts RDC6445G system, which has better hardware stability and better anti-high voltage and anti-static interference characteristics.

130w co2 laser cutting machine non metal cutter laser.
1)TAIWAN square rails and belt,Leadshine 57 three compartment stepping motor and 3DM580 Driver.
2)Stainless steel electric ball screw lifting table control by software.
3)Famous YL brand Co2 Laser tube
4)RUIDA 6445 control system.
5)Imported ⅡⅥ adnd Wavelength mirror and lens.
6)Honeycomb or Knife working table.
7)Air Compressor ACO-008,550W Exhaust fan.
8)Red light point,Wifi control.
9)S&A Water chiller CW5200

Compared with the traditional manual engraving, the laser rubber engraving machine has a faster engraving speed, and the engraving effect is also very delicate, which is no less than the manual engraving process. The laser rubber engraving machine gradually replaces the traditional manual engraving, and the proportion in the market increases

Co2 1390 CNC Laser Cutting Edge Features:

ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to around 8cm or be fully retracted, allowing more control over different focal distance setups.
AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise.
Front REAR PASS THROUGH: There’s always extra room! And it can accommodate materials larger than the workbed size.
BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine.

The principle of laser engraving is that the laser beam is transmitted and focused on the surface of the material by the optical mechanism, and the material at the point of action of the laser beam with high energy density is rapidly vaporized to form pits. Use the computer to control the xy console to drive the laser head to move and control the laser switch as required. The image information processed by the software has been stored in the computer in a certain way. When the information is read from the computer in sequence, the laser head will move along the The scanning track is scanned back and forth line by line from left to right and top to bottom. Whenever a “1” point is scanned, the laser is turned on, and when a “0” point is scanned, the laser is turned off. The computer stores information in binary, which coincides with the two states of the laser switch.

The Feature of Dowin co2 laser cutting machine:
1)TAIWAN square rails and belt,Leadshine 57 three compartment stepping motor and 3DM580 Driver.
2)Stainless steel electric ball screw lifting table control by software.
3)Famous YL brand Co2 Laser tube
4)RUIDA 6445 control system.
5)Imported ⅡⅥ adnd Wavelength mirror and lens.
6)Honeycomb or Knife working table.
7)Air Compressor ACO-008,550W Exhaust fan.
8)Red light point,Wifi control.
9)S&A Water chiller CW5200

1390 Co2 laser cutting machine is widely used in electronic, craft and gift, garment, leather, toy, computerized embroidery, packing and printing, shoe making, furniture, advertising industries ect.
Application:
1) Acrylic engraving and cutting
2) Wood/MDF engraving and cutting
3) Leather engraving and cutting
4)Paper engraving and cutting
5) Rubber sheet engraving and cutting
6) Double color board & coated board engraving
7) Marble and stone engraving

Dowin rubber stamp laser engraving machine is used specially for the engraving of rubber stamps, small area art crafts, gifts and decoration.

It is suitable for Plexiglas, wood, density board, card, double-color board, leather, glass; compose diamond, horn, plastic, the nonmetal materials such as press used rubber plate

The stamp laser engraving machine can make the engraved surface more round and smooth, and can greatly improve the engraving efficiency. The stamp laser engraving machine can quickly reduce the surface temperature of the engraved object and avoid its deformation. It is specially used for stamp engraving.

1390 co2 laser cutting machine is widely used in electronic, craft and gift, garment, leather, toy, computerized embroidery, packing and printing, shoe making, furniture, advertising industries ect.
Application:
1) Acrylic engraving and cutting
2) Wood/MDF engraving and cutting
3) Leather engraving and cutting
4)Paper engraving and cutting
5) Rubber sheet engraving and cutting
6) Double color board & coated board engraving
7) Marble and stone engraving

Using a laser seal engraving machine to engrave a seal, its advanced nature is that the marking process is non-contact processing, does not produce mechanical extrusion or mechanical stress, and has minimal impact on the seal

1390 Co2 laser cutting engraving machine ,Laser Tube Lifetime:
More than 80W CO2 laser tube with an estimated lifetime of up to 5,000 operation hours depending on power setting usage and water cooling performance
PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime.

The price of the CO2 laser engraving machine is related to the configuration of the machine. The higher the configuration of the laser engraving machine and the greater the power, the higher the price of the laser engraving machine.
Generally speaking, the power of rubber laser engraving machine is 50w, 60w.

CO2 engraving machine is very efficient. The CO2 engraving machine has no “knife marks” during use, and does not damage the surface of the workpiece

1390 wood co2 laser engraving machine adopts imported linear guide and DSP system control software. The machine has stable performance and applicable for different industries. It is the ideal choice for non-metal processing industry.

Dowin adopts CW-3000 water cooler, economical cooling device, easy to install and operate, compact and easy to move, good cooling effect, specially designed for CO2 laser engraving machine.

Dowin laser engraving machine hardware accessories, reasonable design, adjustable height and reflection angle, industrial-grade production technology, the largest reduction of errors.

With the maturity of the development of laser engraving technology, laser engraving machine engraving seals are widely used for graphic processing of products, and laser engraving machines are rapidly used in various materials that need to be engraved.

Dowin newly plexiglass 6090 laser engraving machine 80W 100W 130W Co2 lazer cutting machines are a ideal product to process wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics and glass.

The stamp laser engraving machine can make the engraved surface more round and smooth, and can greatly improve the engraving efficiency. The stamp laser engraving machine can quickly reduce the surface temperature of the engraved object and avoid its deformation. It is specially used for stamp engraving.

Laser engraving processing as a new processing method, is gradually widely used in leather, textile and garment industry for its processing precision, fast, simple operation, high degree of automation.

Engrave stamps with a laser stamp engraver to laser engrave a large number of personalized stamps in minutes. The engraving in the mass production of stamp writing boards has also been significantly simplified and accelerated.
How to choose a stamp engraving machine is a problem encountered by many customers at present
The general seal laser engraving machine is small in size, light in weight and easy to move.
DOWIN laser stamp engraving machine is a machine specially designed for laser engraving, with high engraving precision and flexibility

There are many kinds of materials for seals, usually metal, jade rubber, wood, etc. When choosing a stamp engraving machine, you should choose according to the material. General metal, jade materials choose fiber laser machine; wood or rubber and other materials can choose professional rubber seal engraving machine for engraving

There are multiple power options for the rubber stamp engraving machine. Customers can choose the suitable power according to their needs. The higher the power of the laser stamp engraving machine, the faster the engraving speed. It is suitable for non-metallic materials such as rubber and two-color plates.

Our co2 laser engraving amchine with higher precision and higher quality.

(1) Cutting:
acrylic,perspex,wood,MDF,plywood,veneer,paper,leather,rubber,fabric,cloth,canvas,foil,leather,fur,foam,plastic,PES,PC,PA,PE,PP,composite material,PVC, etc.
(2) Engraving:
acrylic,perspex,wood,MDF,plywood,stone,marble,glass,jade,crystal, metal coating,paper,leather,rubber,fabric,cloth,plastic,PVC, etc.

When making the stamp face, make sure that the design file has been mirrored, otherwise the imprint of the stamp will not be able to be read normally. Using a professional seal engraving machine can maximize the efficiency of seal engraving

The advantages of co2 laser engraving cutting machine:

1. Wide range: CO2 laser can engrave and cut almost any non-metallic material. And it’s cheap!

2. Safe and reliable: non-contact processing will not cause mechanical extrusion or mechanical stress to the material. No “knife marks”, no damage to the surface of the workpiece; no deformation of the material;

3. Precise and meticulous: the machining accuracy can reach 0.02mm;

Dowin laser focused to provide our clients excellent quality Arts And Crafts Engraving Cutting.This cutting machine is developed using advance technology using finest quality material as per the set norms of market. Also, we provide this Arts & Crafts Engraving Cutting Machine in various specifications according to the needs of customers

CO2 laser engraving and cutting machine is extremely high and responsive, the main machine features
①The drive system adopts high-precision linear guides and sliders, with high precision, wear resistance, low resistance and fast speed; stable transmission, strong shock absorption ability and low noise.
②The positioning of the red light is accurate, and it is convenient and quick to locate the engraving and cutting position.
③The laser head is sensitive and accurate to ensure the quality of engraving.

The rubber stamp laser engraving machine is a kind of Laser Engraving Machine System equipped with CO2 laser Tube, it is used to engrave on wood, bamboo, plexiglass, crystal, leather, rubber, marble and glass etc. It is most suitable and the preferred choice of equipment in industries such as advertisement, gifts, shoes, toys etc. It supports multiple graphic formats, such as HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI and so on.

Application and sample of Co2 laser engraving cutting machine:
1. The 1390 co2 laser cutter engraving machine co2 can engrave wood, bamboo, Ivory, bone, rubber, leather, marble, shell and cut paper, acrylic, felt etc.
2.Mainly used in large plastic character cutting, color plate engraving, organic glass engraving and cutting, sign engraving, crystal engraving, trophy engraving etc.
3.Leather Clothing Processing Industry: engraving and cutting complex patterns on genuine leather, synthetic leather, leather, woolens, clothing, furnishings, glove, handbag, shoes, hats, toys, etc.

Dowin’s CO2 laser engraving machine is equipped with a rotating shaft, which has stable performance, can work for a long time, simple operation, high engraving efficiency, and can easily engrave cylindrical objects.

Dowin laser stamp engraving machine is small in size and easy to carry. It can easily engrave on rubber, paper, wood and other materials. It has a lifting function and can meet various needs of customers.

The feature of 3040 40w co2 laser engraving machine DIY
1)Perfectly tidy power supply system.The power supply system of the whole machine is strictly in accordance with international standards. Different control power signal lines adopt separate routing design, avoiding electromagnetic interference between various types of signal lines.

2)Adopt high-precision guide rails imported from South Korea.Improve laser engraving and cutting accuracy and ensure that the laser machine runs efficiently and stably for a long time.

3)5mm thick aluminum alloy oxidation work platform, to ensure the level of the work platform, improve the accuracy of object carving.

4)High precision drive motor.The X / Y axis uses a high-precision belt-driven Leadshine motor to improve response speed and cutting engraving accuracy.

5)The latest manual rotary lifting system is fast and stable.

6) Red dot positioning Synchronize with the laser, which make the operation more convenient.

The Application of stone laser engraving machine:
It is widely used in cutting, engraving, through-carved, hole drilling on fabric, garment, leather, wood and bamboo, acrylic, craft and gift, marble and granite, ceramic, glass and other non-metal materials. Mainly applicable for engraving for heavy materials, such as gravestone, granite, marble etc.

Main Feature:
1)TAIWAN square rails and belt,Leadshine 57 three compartment stepping motor and 3DM580 Driver.
2)Stainless steel electric ball screw lifting table control by software.
3)Famous YL brand Co2 Laser tube
4)RUIDA 6445 control system.
5)Imported ⅡⅥ adnd Wavelength mirror and lens.
6)Honeycomb or Knife working table.
7)Air Compressor ACO-008,550W Exhaust fan.
8)Red light point,Wifi control.
9)S&A Water chiller CW5200

✦Applicable Materials:
CO2 laser cutting and engraving machine is usually used in acrylic,wood, leather, paper, plexiglax,rubber and other nonmetal materials
✦Applicable Industries:
Rubber,plastic,cloth toys,leather ,computer embroidery cutting, mould, crafts ,bamboo and wood, advertising and building decoration ,packaging and printing ,paper products.

Features：
1. Safety protection electrical design。
2. Intelligent Marble engraving
3.Intelligent Protection System
4.Cover open protection system
5.Honey Comb Platform

1.DW-1390 CO2 laser engraving machine, able to engrave and cut various non-metals, like acrylic, double-color plate, marble, wood, MDF, plywood, textile, leather, glass, paper etc.

2.Widely applied in craft gifts, souvenir, Chinese paper cutting, advertising signs, clothes, furniture and many other industries.

3.Fast engraving and cutting speed, high precision. Can be configured with up-down lifting table, honeycomb table, rotary, etc.

4.Machine working size can be selected according to your needs.we have 600x400mm, 900x600mm, 1300x900mm, 1400x900mm, 1600x1000mm, 1300x2500mm, and so on.