metal fiber laser marking machine

Laser marking technology can be used on all types of aluminum. When laser engraving aluminum, deep marking can be easily achieved that is not possible with other materials. Aluminum laser engraving creates strong marks that are resistant to heat, abrasion, coatings and finishes. With aluminum laser marking machines, permanent, high-contrast marks can be produced that are immediately visible. When you use a laser marking system on aluminum, you can expect to save money with minimal maintenance requirements for a consumable-free operation. Laser engraving marks identifiers on aluminum surfaces with maximum speed and efficiency.

Laser marking technology is a new marking process integrating laser technology, computer technology and mechatronics technology, which has many advantages over traditional marking technology, such as high precision, good effect, wide range of application, environmental protection, no consumables, fast speed and high efficiency, and its application field is becoming more and more extensive.

By using laser as the processing means, there is no processing force between the workpiece and the workpiece, and it has the advantages of no contact, no cutting force, and little thermal influence, which ensures the original accuracy of the workpiece. At the same time, the adaptability to the material is wide, and it is possible to make very fine marks on the surface of many materials and the durability is very good.

All operations are carried out by computer, which is easy and convenient to operate. Graphics and text styles can be changed at will without molds. Customers can design fonts at will according to their own preferences. It also has the advantages of no consumables, zero pollution, no noise, no maintenance, long service life, etc. It can realize assembly line production, greatly improve the production efficiency of enterprises and reduce the overall cost.

With the development of intelligent technology, fiber laser marking machine is more and more accepted in the electronics industry, which is characterized by small size, low functional loss, long life, high efficiency, maintenance-free, preservation of high quality, exquisite light spot, and no consumables.

High optical and electrical conversion rate, professional for marking special materials in industrial processing. Hardware control technology and intelligent software, low energy consumption and easy maintenance, high precision marking quality and work stability. Full computer control, intuitive operation, easy, friendly interface, using common software to input pattern manuscript, easy to input, powerful.

Can process many kinds of metal and some non-metal materials. Marking of bar codes, 2D codes, text graphics, etc. is possible. It is non-contact processing, no damage to the product, and good marking quality. Fast processing speed, processing speed is 2-3 times of the traditional laser marking machine. Laser beam is fine, processing material consumption is very small, processing heat-affected zone is small. High processing efficiency, using computer control, easy to realize automation.

Fiber laser marking machine adopts Rayke fiber laser, high-speed galvanometer scanning system, stable output power, good optical mode, excellent beam quality, fast marking speed, good effect, high efficiency, can fully meet the needs of customers for mass production. The machine appearance, simple operation, no supplies, depreciation costs low long-term trouble-free operation, free maintenance, can fully meet the demand of continuous work of industrialization.

Fast marking speed, high efficiency, workpiece batch processing time is short, to achieve unit time and individual product profit maximization. Fiber laser has long service life, stable laser output power, high reliability and 100,000 hours of maintenance free. High electro-optic conversion rate, no consumables, for customers to save operating costs. Can carve metal materials and some non-metallic materials, mainly used in the fields with high requirements for finish and fineness.

High precision, high speed, controllable engraving depth, long continuous working time and maintenance-free. High-speed scanning galvanometer and expanding focusing system, low price, stable light output, fast engraving, and large working area. It has strong anti-interference ability, strong adaptability and stable operation, which can help you achieve 24-hour continuous and stable operation. The red-light positioning system is used to make the processing positioning more accurate and avoid waste. Open multi-language support function can easily support multiple languages.

The fiber laser marking machine adopts an integrated overall design, which is easy to integrate into the industrial production process. The laser can be directly operated through the control interface, without consumables, and the depreciation cost of the product is greatly reduced. It has high efficiency, long life and maintenance-free performance that traditional lasers do not have. The high-speed galvanometer scanning system is adopted to improve the speed of reaching the standard while ensuring the accuracy, and greatly reduce the delay.

It can process a variety of metal and non-metal materials, especially suitable for marking high hardness, high melting point and brittle materials. Because the laser beam is very thin, the processing heat affected zone is small, and the processing material consumption is also small.
1) Permanent and indelible marking process.
2) Non-contact type, will not generate stress or change the physical properties of the material.
3) Internationally recognized quality marking standards.
4) Controlled by computer, easy to operate.

The fiber laser marking machine can print various symbols and texts on metal materials, and even patterns can be printed, using extremely fine light spots for engraving.
The main advantages of laser marking machine:
1) It can process a variety of metal and non-metal materials, especially suitable for marking high hardness, high melting point and brittle materials.
2) It belongs to non-contact processing, with good marking quality, no damage to the product, and no tool wear.
3) Because the laser beam is very thin, the processing heat affected zone is small, and the processing material consumption is also small.
4) It adopts computer control, which is easy to realize automation and has high processing efficiency.

Fiber laser marking machine is mainly used for marking and engraving of stainless steel, aluminum, copper, gold, silver and other metals. The machine has fast marking speed and good effect. It is the first choice for laser marking machine.
1) Genuine EzCad software.
2) Raycus fiber laser sources come with a 3-year warranty.
3) High quality laser beam, the focal diameter does not exceed 20 μm.
4) Special laser head for high-speed marking and high-speed scanning.

Fiber laser marking machine is widely used in metal material marking, metal mobile phone case uses the main advantages of laser marking machine:
1) The pictures and texts are clear, can not be wiped, and will not fade
2) High efficiency, no consumables, wide application range
3) No harmful substances are produced, safe and environmentally friendly
4) Increase added value and improve product quality

Dowin Laser Equipment Company can be the first choice for power bank laser marking, providing perfect results for your needs. The marking of the laser marking machine is clear, beautiful, durable, environmentally friendly and anti-counterfeiting, and has a high degree of automation, which can reduce the cost consumption and defect rate caused by labor, and improve the processing speed.

The laser marking machine engraves trademarks and customized graphic texts on the U disk, the logo will not fade for a long time, the pattern will not be blurred or faded with the change of the environment, the laser beam is thin, the material consumption is small, the heat affected zone is small, and the processing efficiency is high. Computer control, easy to realize automation.

Fiber laser marking machine is a new generation of laser marking machine system developed by our company using the world’s advanced laser technology. The fiber output laser is used, and then the marking function is realized by a high-speed scanning galvanometer system. The fiber laser marking machine has high electro-optical conversion efficiency, adopts air-cooled cooling, compact size, good output beam quality and high reliability.

Dowin fiber laser marking machine 30w metal laser engraver. It is most suitable for engraving and marking all metal and some special non-metal materials. And fiber laser marking machine has multi-functional laser machine in laser market.So if you are interested in this model, please feel free to contact us.

Installed Raycus famous brand fiber laser source
Fiber laser marking machine can be used to process the metal and nonmetal material with highest precision, such as Aluminium, Copper, Metal and Silver, Plastic…etc
High integration density, compact structure, and small size, fast working speed can be arrive 7000mm/s
Very suitable for plastic ear tag animal tag mark, mainly can mark qr code, serial number