High quality Raycus IPG JPT 50w fiber laser engraving machine stainless steel metal aluminum deep engraving machine
All operations are carried out by computer, which is easy and convenient to operate. Graphics and text styles can be changed at will without molds. Customers can design fonts at will according to their own preferences. It also has the advantages of no consumables, zero pollution, no noise, no maintenance, long service life, etc. It can realize assembly line production, greatly improve the production efficiency of enterprises and reduce the overall cost.
High quality Raycus IPG JPT 50w fiber laser engraving machine stainless steel metal aluminum deep engraving machine
With the development of intelligent technology, in the electronics industry, fiber laser marking machine is increasingly accepted, its characteristics are small size, low functional loss, long life, high efficiency, maintenance-free, preservation of high quality, exquisite light point, no consumables, etc..
Laser marking machine engraving mold, metal is non-contact processing, no need to touch the surface of the object can be printed, so it does not cause damage to the object, is the use of laser beam on the surface of a variety of different materials permanently marked. The effect of the marking is to expose deep layers of material by evaporation of the surface material, or by traces of chemical and physical changes in the surface material caused by light energy, or by light energy burning parts of the material to show the desired etched graphics and characters. The laser beam acts like a chisel used in engraving, chiseling away excess metal material.
| Work Area | 110x110mm/200x200mm/300*300mm ( Optional ) |
| Laser Power | 20W/30W/50W |
| Fiber laser generator | Raycus |
| Laser Pulse Frequency | 20KHz – 200KHz |
| Laser scanner | Sino-Galvo SG7110 |
| Red light dot | Yes |
| Power supply | Taiwan MW (Meanwell) |
| Wavelength | 1064±10nm |
| Beam Quality M2 | <2 |
| Min Line Width | 0.01mm |
| Min Character | 0.15mm |
| Marking Speed | ≤10000mm/s |
| Marking Depth | ≤0.5mm |
| Repeat Precision | ±0.01mm |
| Power Supply | 110V /220V(±10%)/50Hz/4A |
| Gross Power | <500W |
| Laser Module Life | 100000h |
| Cooling Style | Air Cooling |
| System Composition | Laser source, Control System, Industrial Computer, Vibration lens |
| Working Environment | Clean and Dust Free |
| Operating Temperature | 10℃-35℃ |
| Humidity | 5% to 75% (Free of Condensed Water) |
| Power | AC220V, 50HZ, 10Amp Stable Voltage |
| Warranty | 12 Months ,Fiber laer source 35 months |
…
