Desktop JPT 50w fiber laser deep engraving stainless steel laser cutting machine jewelry laser engraver
Laser marking technology can be used on all types of aluminum. When laser engraving aluminum, deep marking can be easily achieved that is not possible with other materials. Aluminum laser engraving creates strong marks that are resistant to heat, abrasion, coatings and finishes. With aluminum laser marking machines, permanent, high-contrast marks can be produced that are immediately visible. When you use a laser marking system on aluminum, you can expect to save money with minimal maintenance requirements for a consumable-free operation. Laser engraving marks identifiers on aluminum surfaces with maximum speed and efficiency.
(1) small thermal impact: deep carving laser marking machine wavelength is short, focusing spot is extremely small, so the thermal impact of the marking process in the mold is extremely small, there will be no mold scorching, melting, deformation and other problems.
(2) fine graphics: laser marking machine with a small spot, marking graphics on the mold with very high precision, laser words are very fine points and lines, so the fine quality of engraved graphics.
(3) high efficiency: laser marking machine processing method is simple and flexible, only need to set up the need to mark the graphics on the computer, you can complete the marking needs through the laser, marking trademark logo in just a few seconds to complete. With the traditional screen printing and other ways to greatly reduce the processing costs, and improve the processing efficiency, can bring considerable economic benefits for enterprises.
(4) permanent marking: the use of laser marking machine marking graphic information can not be erased, with the effect of never losing color, and it is difficult to tamper with the information, can give the product to play the effect of anti-counterfeiting anti-falsification, can be traced back to the source of the product according to the marked information. 5) no supplies and no pollution: laser engraving process without any auxiliary materials, laser beam marking there is no pollution of the environment materials, non-contact laser marking process stable.
| Marking scope | 100*100(200*200)mm |
| Power | 20W(Optional 30W/50W) |
| Laser sources | Fiber module |
| Laser Head | Sino-Galvo SG7110 |
| Red light dot | From Xi’an |
| Wave length of laser | 1064nm |
| Minimal character | 0.001mm |
| Marking speed | 7000mm/s |
| Support format | PLT, BMP, DXF, JPG, TIF, AI etc |
| Power supply | Taiwan MW |
| Power supply | 110V/220V/ 50Hz/2kVA |
| Process Material | All kinds of metal and part of Non-metal Materials |
| Cooling ways | Inner Installed-air Cooling |
| Interface | USB |
| Warranty | 3 years |
