6040 Wood MDF Plywood Laser Engraving Machine for Sale

Notes on using 6040 CO2 engraving machine
1. When using auto focus, pay attention to the fact that the auto focus rod must be fastened, otherwise the work surface will hit the laser.
2. When the laser engraving machine is working, it is forbidden to open the cover.
3. Turn on the smoke exhaust and blowing equipment during processing.

The stepping motor of the DOWIN laser engraving machine Leadshine is made of high-quality cold-rolled copper sheets and high-temperature resistant permanent magnets, with high reliability and low motor heating. These stepper motors run very smoothly and have no significant resonance zones throughout the speed range.

Dwoin laser engraving machine as a CNC engraving machine has the function of a CNC engraving machine, converting the pattern into a signal, and then converting the signal into the track of the engraving machine movement

When using a laser seal engraving machine, after engraving the seal, it is necessary to clean the seal to ensure that the seal is clean.
You can usually clean or scrub the stamp with detergent

130w co2 laser cutting machine non metal cutter laser.
1)TAIWAN square rails and belt,Leadshine 57 three compartment stepping motor and 3DM580 Driver.
2)Stainless steel electric ball screw lifting table control by software.
3)Famous YL brand Co2 Laser tube
4)RUIDA 6445 control system.
5)Imported ⅡⅥ adnd Wavelength mirror and lens.
6)Honeycomb or Knife working table.
7)Air Compressor ACO-008,550W Exhaust fan.
8)Red light point,Wifi control.
9)S&A Water chiller CW5200

1390 Co2 Laser Cutter Applicable materials
Wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper, leather, rubber, ceramic, glass and other nonmetal materials.

1390 Co2 Laser Cutter Applicable industries
Advertisement, arts and crafts, leather, toys, garments, model, building upholster, computerized embroidery and clipping, packaging and paper industry.

Rubber stamps engraved with a small laser engraving machine have more flexible patterns and can engrave complex patterns.
Laser stamp engraving machine has high working efficiency and low cost

The principle of laser engraving is that the laser beam is transmitted and focused on the surface of the material by the optical mechanism, and the material at the action point of the high-energy density laser beam is rapidly vaporized to form pits.
Mainly used in the engraving and cutting of non-metallic materials, such as wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper

CO2 laser engraving machine adopts EFR laser tube, which has stable machine performance and long service life, which is very suitable for engraving rubber seals and other products

1390 Co2 laser cutting engraving machine ,Laser Tube Lifetime:
More than 80W CO2 laser tube with an estimated lifetime of up to 5,000 operation hours depending on power setting usage and water cooling performance
PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime.

1390 Co2 Laser engraving cutting machine well work for all non-metal material such as wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper, leather, rubber, ceramic, glass, etc.

Two different models 1390 100W co2 laser cutting machines, one is slim model with around 15cm up-down table, can pass 90cm door and can load 24 sets in one 40HQ. Other is standard model with around 30cm up-down table and with 4 cbm.

6040 CO2 laser engraving machine is widely used in industry
Application industry:
Kitchen utensils metal sheet cutting, advertising characters, large-format truncation, clothing proofing, leather industry, shoe industry, decoration industry, furniture industry, packaging and printing industry, model industry, craft gift industry, etc.
Applicable materials:
Sheet metal, acrylic, plexiglass, glass, cloth, leather, paper, bamboo and wood products, film, canvas, etc.

The co2 laser engraving machine has low cost when engraving items, and is not limited by the number of processing. For small batch processing services, laser processing is cheaper.
Low cost: Not limited by the number of processing, for small batch processing services, laser processing is cheaper.
The materials that CO2 laser engraving machine can cut and engrave include wood, acrylic, paper, cloth, epoxy resin, plastic, rubber, crystal, etc.

Feature of 1390 co2 laser cutter engraving machine:
1. CWG laser tube with high working efficiency for laser cutting engraving machine.
2. Good quality and elastic belt transmission eases the shock and vibration while working, drive quickly with little noise.
3. The laser cutting engraving machine also adopts high-end technology, the best engraving and scanning accuracy, it can clearly engrave on 1mm letters.
4.Stable HY&ZY laser power supply.

The stamp laser engraving machine can engrave stamps of non-metallic materials, such as wood stamps, rubber stamps, crystal stamps, etc.

The professional laser seal engraving machine is easy to operate, with standardized fonts, easy to learn and use, free conversion of orthographic, inverse, and yin and yang characters to meet the diverse needs of customers

Leather product is widely used in our daily life. How to make eather products are more diversified, choose Dowin laser 6040 laser engraving machine is a good choice. Engrave patter and letter on leather product to achieve leather customization, we believe client can benefit a lot from this set machine

If there is a need to engrave and cut non-metallic materials, CO2 laser engraving and cutting machine is a good choice. Using a laser engraving machine to engrave rubber stamps has higher precision and can be used to engrave complex patterns.

The 6040 CO2 engraving machine is widely used in the market, and can be used for plexiglass laser engraving (cutting), two-color plate engraving, laser production of various plaques, all kinds of leather, clothing, fabric textile patterns, artificial leather cutting and pattern engraving and cutting.
6040 laser engraving machine has several types of laser tube RECI and CDWG, complete product models

The Main Features of 1390 Co2 laser machine:
1. High speed laser cutting machine adopts high efficiency CWG/YL/RECI laser tube,the laser beam is more stable than the traditional type,and have long life time.

2. Compared with the ordinary laser machine,the series adopts more scientific design and high strength steel-frame structure,which increase the fuselage strength more than 40% to prevent the machine from distortion during long term work.

3. The humanized and modern appearance makes the operation and maintenance quite easy.

The application of co2 engraving machine can be found in almost every industry, and it has become a very common equipment in our daily work. Now, it is mainly used in advertising industry, craft industry, mould industry, construction industry, printing and packaging industry, wood industry, decoration industry, leather industry…

As a professional laser factory,and we are always upgrading our machines,
for now, the configuration of our 1390 co2 laser cutting engraving machine:
-130*90cm working size
-CW5200 water chiller with S&A brand
-Famous HIWIN square rail from Taiwan
-CWG laser tube
-Ball screw electrical moving table controlled by softeware
-Leadshine 57 3DM5800S motor and driver
-Ruida 6445 (work with Lightburn)
-ACO008 air pump and 550w exhaust fan
-Double exhaust pipes
If you have any questions about laser machine,please contact with DOWIN laser.

Dowin can provide certifications:

FDA Compliant
CE Certification
ISO Quality Certification

Dowin 1390 co2 laser cutting machine can use Wifi control, no need the wire to connect the computer. So one computer can control many machines .
DW-1390 100w laser machine for cutting and engraving
Applicable materials:
wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper, leather, rubber, ceramic, glass and other nonmetal materials.

In our daily engraving process, the engraving depth of the rubber seal engraved by the laser engraving machine is related to factors such as the absorption of the laser by the engraved material, the power of the laser, and the time of the laser on the engraved material.

The 6040 laser engraving machine is widely used, and it is commonly used in the advertising industry and the clothing industry. The advantage of laser processing is that it can quickly engrave and hollow out various patterns on the surface of various upper materials. Since laser processing is a non-contact processing method, it will not produce any external deformation on the upper. It also has many advantages such as high engraving precision, hollow without burrs, and can process any shape.

The Application of stone laser engraving machine:
It is widely used in cutting, engraving, through-carved, hole drilling on fabric, garment, leather, wood and bamboo, acrylic, craft and gift, marble and granite, ceramic, glass and other non-metal materials. Mainly applicable for engraving for heavy materials, such as gravestone, granite, marble etc.

The cost of a rubber stamp laser engraving machine is lower than that of traditional hand engraving. The laser seal engraving machine has fine engraving, stable work efficiency, and will not be affected by other factors. The engraving speed is fast, and the cost of mass production using a laser rubber engraving machine is lower than manual engraving.

300W servo motor co2 laser cutting machine is most suitable for high-precision high-gloss organic materials/acrylic products cutting related industries, advertising industry, lighting industry, photo frame and other woodworking industries, architectural model industry, handicrafts, decoration industry, clothing proofing, leather industry, shoe industry, furniture industry, packaging and printing industry , craft gift industry, etc.

The compatibility Dowin laser cutting machine

The Ruida control board works seamlessly with RDWorks for Windows PC (included) and LightBurn (not included)
RDWorks (included) and LightBurn (not included) are compatible with Windows 7, 8, 10 (64/32 bit), XP, 2000, and Vista.
The Ruida controller is compatible with macOS (Version 10.11 and higher) ONLY if you use LightBurn software (not included)
Photo-ready to convert images from HPLG, BMP, GIF, JPG, JPEG, DXF, DST, AI formats, and more into .RD files for laser processing.
4-Pin Port connection for rotary axis devices.

Now seal engraving generally uses materials such as hard glue and rubber as the bottom surface of the seal. Using a small laser engraving machine to engrave the pattern of the seal greatly improves the production efficiency and reduces the production cost.

How to engrave stamps with a laser stamp engraver?
When making the stamp face, make sure that the design file has been mirrored, otherwise the imprint of the stamp will not be able to be read normally.

1390 Co2 laser cutting machine adopts imported linear guide and DSP system control software. The machine has stable performance and applicable for different industries. It is the ideal choice for non-metal processing industry.

1390 Co2 laser cutting machine is widely used in electronic, craft and gift, garment, leather, toy, computerized embroidery, packing and printing, shoe making, furniture, advertising industries ect.
Application:
1) Acrylic engraving and cutting
2) Wood/MDF engraving and cutting
3) Leather engraving and cutting
4)Paper engraving and cutting
5) Rubber sheet engraving and cutting
6) Double color board & coated board engraving
7) Marble and stone engraving

The Package of 1390 Co2 laser cutting machine Includes:
1 x Laser Engraver Machine
1 x Water Chiller
2 x Water Hoses
1 x Grounding Wire
1 x Exhaust Fan
1 x USB Cable
1 x USB Drive with Software
10 x Hex Wrenches
1 x Double-sided Tape
1 x Power Cord
1 x Accessory Bag
2 x Keys
1 x Silicone Sealant
1 x Instruction Manual

The Application of stone laser engraving machine:
It is widely used in cutting, engraving, through-carved, hole drilling on fabric, garment, leather, wood and bamboo, acrylic, craft and gift, marble and granite, ceramic, glass and other non-metal materials. Mainly applicable for engraving for heavy materials, such as gravestone, granite, marble etc.

The Co2 Laser Cutting Machine Application:
1) Acrylic engraving and cutting
2) Wood/MDF engraving and cutting
3) Leather engraving and cutting
4)Paper engraving and cutting
5) Rubber sheet engraving and cutting
6) Double color board & coated board engraving
7) Marble and stone engraving

Dowin laser machine produces stone laser machine,There are no limits on your creativity when it comes to engraving stone with a laser. Engrave a wide variety of stones such as marble, slate, granite or porcelain and finish or personalise the stylish natural products.

The Dowin laser seal engraving machine is widely used in the engraving of non-metallic materials. The laser rubber engraving and stamping machine is mainly used to engrave rubber stamps, and the engraving effect is clear.
Laser stamp engravers also work well for engraving wood, acrylic, rubber and foam

Features of the machine
Adjustable speed and power, smooth and precise engraving and cutting USB interface, U-flash disk supported, work with a PC

Machine Features
✦Drive system with high precision linear guide and slide block, high precision ,wearresistance, small resistance, high
speed;arc-gear synchronous belt 3m,stabletransmission, strong shock absorption ability and small noise.
✦Red cross accurate position, convenient and quick in finding engraving and cutting position.
✦Equipment with automatic / manual modulation focused laser head, responsive andaccurate to ensure sculpture quality.

Features of 100W wood laser cutter engraving machine :
1. Configure high power and quality CWG laser tube, can work over 10000 hours.
2. With function of restoring from poweroff, continuation function from break point.
3. Transmit files directly from Corel draw and Ruida, Photoshop, Lightburn directly.
4. Adopt imported HIIWIN guide rail with high precision.

The principle of laser engraving is that the laser beam is transmitted and focused on the surface of the material by the optical mechanism, and the material at the action point of the high-energy density laser beam is rapidly vaporized to form pits.
Mainly used in the engraving and cutting of non-metallic materials, such as wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper

The Dowin Acrylic Laser Cutting Machine Application:
It is widely used in electronic, craft and gift, garment, leather, toy, computerized embroidery, packing and printing, shoe making, furniture, advertising industries ect.
Application:
1) Acrylic engraving and cutting
2) Wood/MDF engraving and cutting
3) Leather engraving and cutting
4)Paper engraving and cutting
5) Rubber sheet engraving and cutting
6) Double color board & coated board engraving
7) Marble and stone engraving

The CO2 engraving machine can also engrave plywood, which is a man-made wooden board and one of the commonly used materials for furniture. Carving on plywood is actually not much different from carving on wood, but one thing to pay attention to is that the carving depth should not be too deep

Co2 laser cutting machine
Optional accessories

(01)Rotary attachment
(02)Auto focus pen
(03)Laser tube of high power(100W/130W/150W)
(04)Honey comb platform
(05)Water chiller(CW-5000 CW-5200)

✦Applicable Materials:
CO2 laser cutting and engraving machine is usually used in acrylic,wood, leather, paper, plexiglax,rubber and other nonmetal materials
✦Applicable Industries:
Rubber,plastic,cloth toys,leather ,computer embroidery cutting, mould, crafts ,bamboo and wood, advertising and building decoration ,packaging and printing ,paper products.

Advantages of carbon dioxide laser engraving machine:
The non-contact processing method is adopted, which minimizes the thermal influence and avoids the deformation of the processing material.

100W Co2 Laser Cutting Machine Engraver for Stone Overall :
1. Installed high quality laser tube, can work 3000~10,000 hours (depend on laser power).
2. Transmit files directly from RUIDA and Lightburn,Photoshop, Tajima directly.
3. Adopt HIWIN guide rail with high quality
4. Electrical moving table makes thicker material engraving and utting more easy.

Dowin products are of reliable quality, attention to detail and after-sales service. The hardware accessories of the laser engraving machine are made of high-quality materials, which are durable and not afraid of deformation. Multi-layer electroplating coating, corrosion-resistant and not fading, often maintains luster.

The Advantage of Dowin CO2 laser machine:
VERSATILITY
SAFETY FRAME
SIMPLE CONTROL
SEASY MAINTENANCE
COMPACT DIMENSIONS
ENERGY-SAVING NO CONSUMABLES

Dowin 1390 co2 laser engraving machine is suitable for cutting and engraving most non-metallic materials, such as paper packaging, plastic products, label paper, leather cloth, glass ceramics, resin plastics, bamboo and wood products, PCB boards, etc.

Dowin CO2 lasers are ideal for laser marking, engraving and cutting systems due to their high performance, reliability and low cost. Dowin Rubber Stamp Laser Engraving Machine Professionally Engrave Stamps with Higher Efficiency

Laser engraving and processing of rubber requires relatively high laser power to achieve a certain level of production efficiency. The higher the laser power, the faster the laser engraving speed.

CO2 engraving machine is very efficient. The CO2 engraving machine has no “knife marks” during use, and does not damage the surface of the workpiece

DOWIN CO2 laser engraving and cutting machine has obvious advantages. The optimized design of the mechanical structure saves space, and the structure is not deformed, and the cutting precision is high. Taiwan imported square linear guide, long service life.
With automatic focus, red light positioning and other functions, the accuracy of the machine is improved and its functions are maximized. Able to work on most non-metallic materials, saving time and efficiency.

1390 Co2 Laser engraving cutting machine well work for all non-metal material such as wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper, leather, rubber, ceramic, glass, etc.

Advantages of carbon dioxide laser engraving machine:
The work efficiency is 3-5 times that of the traditional marking process, which greatly improves the production efficiency and saves the processing time