Home » Laser Machine » Co2 Laser Machine » CO2 Laser cutting machine » Table Top Laser Cutting Machine 130w 150w 180w Acrylic Laser Cutter Crystal CO2 Laser Engraving Machine
Table Top Laser Cutting Machine 130w 150w 180w Acrylic Laser Cutter Crystal CO2 Laser Engraving Machine
Laser engraving machines are widely used in all walks of life in modern times. There are also countless materials that can be made and processed.
CO2 laser engraving machine is often used for cutting acrylic, wood, density plate, two-color plate, cloth leather and other materials.
With the continuous advancement of technology, laser engraving and cutting machines are also constantly improving, and laser cutting technology will be more and more widely used in the future
Contact US
Get Price
Share:
Content
Table Top Laser Cutting Machine 130w 150w 180w Acrylic Laser Cutter Crystal CO2 Laser Engraving Machine
Laser engraving machines are widely used in all walks of life in modern times. There are also countless materials that can be made and processed.
- Acrylic (plexiglass)
Acrylic is especially widely used in the advertising industry. Whether it is engraving and cutting the whole board or cutting, the cost of using a laser engraving machine is relatively low - Timber/wood
Wood is easy to engrave and cut with a laser engraver. Light-colored woods like birch, cherry or maple can be laser vaporized well and are therefore more suitable for engraving - MDF
It is the wooden pallet that we often use as a signboard lining. The material is high-density board with thin wood grain on the surface. Usually you can get better results by learning the proper design and using 0.5mm two-color plates for inlay. After engraving, just use a damp cloth to clean the surface of the MDF. The above are the common material processing, of course, the laser engraving machine is not limited to processing the above materials, but also can engrave glass wine bottles, porcelain, paper, leather, cloth and so on.
| Model | DW-1390 CO2 Laser engraving cutting machine |
| Working Area | 1300*900mm |
| Laser Power | 80W/100W/130W /150W/80W |
| Laser type | CO2 laser |
| Laser Wave Length | 10.6um |
| Working Table | Knife or honeycomb working table |
| Electrical Up-down: | Yes 0~150mm(Electrical) |
| Maximum Idle Running Speed | 0~3600mm/min |
| Display | LCD monitor system |
| Minimum character | Letter 1.0 x 1.0mm |
| Resolution ratio | 2500DPI |
| Scanning Precision | 0.005mm |
| Control System | PC control with Ruida software |
| Position Type | red dot |
| Support graphic format | AI, PLT,BMP, DST, DWG, DXF… |
| Working Voltage | 220V±10% /50HZ , 110V±10%//60HZ |
| Working life of fiber module | More than 10000 hours |
| Cooling Mode | Water cooling |
| Gross Weight | 450KG |
| Packing size | 201*153*89cm |
| Delivery time | 7working days (According to actual season) |
Inquiry
More CO2 Laser cutting machine
