How to clean and maintain the lens of the laser cloth cutting machine?
How to save and install the lens:
1. Never install the lens with bare fingers. Finger cots or rubber gloves should be worn.
2. Do not use sharp instruments to avoid scratches on the lens surface.
3. Do not touch the film layer when taking the lens, but hold the edge of the lens. A good bench surface should have several layers of cleaning paper towels on it and several cleaning lenses
The application of laser cloth cutting machine is more and more widely, more and more people use laser cloth cutting machine to cut cloth, but how to install or maintain the lens?
First, completely loosen the screws of the protective mirror drawer, pinch the two sides of the protective mirror box drawer with your thumb and forefinger, and slowly pull out the protective mirror box drawer, taking care not to lose the sealing rings on the upper and lower sides of the drawer
Then, seal the drawer mouth with adhesive tape to prevent dust from contaminating the focusing lens.
Finally, when installing the lens, place the lens first, and then press the sealing ring. The collimating mirror and focusing mirror are located inside the fiber cutting head, record the disassembly sequence when disassembling, and ensure the accuracy of reinstallation.
