Acrylic Wood CO2 Laser Cutting Machine 1390 1610 1812 for Glass Engraving Machine

1390 co2 laser cutter with RUIDA software,electrical moving table and S&A CW5200 water chiller .Dowin factory products co2 laser cutting machine and co2 laser cutting machine and also can customize the machine according to your needs.

DOWIN 1390 co2 laser cutting machine is a best selling laser engraver cutter. The working area is 1300*900mm, with a water cooler, exhaust fan, and air pump built inside of the machine which is very compact, clean, and modern.

When cutting wood, the laser engraving and cutting machine has high cutting precision and high cutting efficiency. When cutting wood, the lines are clear and neat, and the overall effect is good.

Laser engraving processing as a new processing method, is gradually widely used in leather, textile and garment industry for its processing precision, fast, simple operation, high degree of automation.

The laser cloth cutting machine has 1610, 1814 and other working areas to choose from. The DOWIN laser cloth engraving machine has two different modes: automatic feeding and CCD laser cloth engraving machine, to meet the diverse needs of customers.
Parameters of laser cloth cutting machine:
Processing area: 1600*1000mm/1800*1400mm
Auto feed cutting table: yes
Cutting Speed: 0-18000mm/min
Camera: Canon
laser tube power: 80W/100W/130W/150W

Compared with the traditional hand-carving method, laser engraving can also achieve a very delicate engraving effect, which is no less than the level of hand-carving craftsmanship, and has been applied in many industries.

It is precisely because the laser engraving machine has so many advantages that the application of the laser engraving machine has gradually replaced the traditional engraving equipment and methods, and has become the main engraving equipment.

Super strong and stable Co2 laser cutting machine
DW1390 co2 laser cutting machin ,The electrical moving table controlled by 4 units stainless steel ball screws , which ensured strength and stable. The whole machine body was fully enclosed, with sealing on every door and window, more safety.

What can laser cutting machines be used for?
1. Craft gifts

It can carve various exquisite patterns and characters on wood, bamboo, marble, organic board, two-color board, leather and other materials to make handicrafts and souvenirs.
2. Wood and furniture

It can be used to engrave patterns and characters on various bamboo, wood and furniture.

3. Plexiglass cutting

Using plexiglass material for cutting, the edge is smooth without polishing again.

The DOWIN laser cutting machine greatly improves the laser processing effect. The three indicators of software design, mechanical structure, electrical performance, material selection of accessories, stability and speed can reflect the equipment level.
Specific features:
1. Equipped with TROCEN camera control system, equipped with high-end cameras, so that the pictures are clearer and the recognition is more accurate and fast
2. Using a new type of stepper motor controlled by research and development, the operating speed of the laser head is higher than that of the general laser cutting machine on the market.
3. Satisfy large-format processing and large-quantity processing

Basic information of DOWIN laser engraving and cutting machine: a laser cutting machine is mainly a combination of body, light and electricity
The whole machine: the frame part of the fuselage, the laser, the laser head, the motion system and the console are three parts, together with auxiliary equipment for laser cutting: voltage stabilized power supply, chiller, air compression, air extraction and dust removal machine, etc. Full set of equipment.
The performance of the Dowin laser engraving machine is very stable and popular in many countries

CO2 laser engraving and cutting machine product features
1. Imported original guide rail, stable cutting and high precision.
2. Adopt advanced computing control system, stable performance; non-contact working mode, no deformation of cutting material, no burning edge.
3. The processed material is more beautiful.

Industries where CO2 laser engraving and cutting machine can be applied:
Clothing, leather, lighting, plush toys, computer embroidery and cutting, handicrafts, paper products, wood products, plastic products and other industries

1.DW-1390 CO2 laser engraving machine, able to engrave and cut various non-metals, like acrylic, double-color plate, marble, wood, MDF, plywood, textile, leather, glass, paper etc.
2.Widely applied in craft gifts, souvenir, Chinese paper cutting, advertising signs, clothes, furniture and many other industries.

The delivery and sevice of Dowin Technology,
1.Timely delivery. Each machine is arranged with precise assembly steps without any delay.
2.After-sales services and Guarantee. We offer -3 years warranty, during the period, any problem happen, we are responsible to solve.

CO2 laser engraving and cutting machine is widely used in the engraving and cutting of non-metallic materials.
The studio uses a laser engraving and cutting machine to assemble flat boards into various three-dimensional models, such as animals, cars and boat models, etc.

The DOWIN laser cloth cutting machine is equipped with a high-definition CCD camera and automatic boundary recognition function, which can realize automatic positioning and cutting of various materials, quickly and accurately cut various complex special-shaped graphics, and eliminate problems such as inaccurate manual positioning and printing deformation.
With the automatic transmission function, it can achieve efficient and accurate nest cutting of large-format pictures, and improve the cutting quality and output.

The double-head laser cutting machine adopts an aluminum knife worktable, which is suitable for processing hard materials such as acrylic and wood. If you need to process soft materials such as leather and cloth, you can choose a honeycomb workbench. The small holes of the honeycomb table have good support performance, which can ensure that the fabric will not be deformed during processing.

LASER ENGRAVER OVERVIEW:
The DOWIN 6090 Laser Engraver commerical use system is equipped with CO2 laser tube, RUDIA control system, integrated water-protection system, ensuring the service life of laser tube efficiency. It also have a standard red dot system, auto focus function so you to locate the laser beam easily

The laser source of the laser engraving and cutting machine is the core component of the laser engraving. The characteristics of the laser source of the laser engraving machine determine the material effect of the laser engraving. The amount of energy has a significant impact on the depth and speed of the engraving.

Compared with traditional cutting methods, the 1610 laser cloth cutting machine has obvious advantages:
(1) The combination of 1610 cloth cutting machine and automation equipment is very convenient, and it is easy to automate the cutting process
(2) As the laser cloth cutting machine adopts laser cutting, it has high flexibility and can cut a variety of patterns
(3) The 1610 laser cloth cutting machine is combined with the computer, which can discharge the whole board and save materials.

The cases suitable for CO2 laser cutting machines are mainly special parts that require uniform cutting, advertising.
The machining of workpieces with complex cutting contours but small quantities is also done with laser engraving and cutting machines. The use of laser engraving and cutting machines can greatly save the cost and cycle of manufacturing molds

co2 laser engraving and cutting machine is a technological equipment that uses laser to engrave the material that needs to be engraved.
Laser engraving machine can also be called laser cutting machine, laser engraving machine, etc., it shoots laser on non-metallic materials such as wood products, acrylic grains, plastic plates, stones, etc. for engraving or cutting

The laser marking machine uses the laser beam to evaporate the surface material to expose the deep material, which causes the chemical change and physical change of the surface material to engrave traces, or burns part of the material through light energy, showing the desired etched pattern, Word

The application field of laser cutting machine involves many industries such as mobile phones, computers, sheet metal processing, metal processing, electronics, printing, packaging, leather, clothing, industrial fabrics, advertising, craftsmanship, furniture, decoration, medical equipment and so on.

Advantages of the DOWIN laser cutter machine
-Faster than others co2 laser machine
-Clean pack Technology
-All-in-one design
-Ruida software can work with Lightburn
-Mufti-Cummunication
-Effective Table and front pass through door
-Strong and Modern body

Feature of 1390 co2 laser cutter engraving machine:
1. CWG laser tube with high working efficiency for laser cutting engraving machine.
2. Good quality and elastic belt transmission eases the shock and vibration while working, drive quickly with little noise.
3. The laser cutting engraving machine also adopts high-end technology, the best engraving and scanning accuracy, it can clearly engrave on 1mm letters.
4.Stable HY&ZY laser power supply.

Application of 100W 1390 Co2 laser machine:
1390 Laser Cutting machine for non-metal is equiped with CWG co2 laser tube,such as acrylic,die board,MDF,plywood,etc.
Applicable materials: acrylic, wood,paper,plastic,MDF,die board.
Applicable show: furniture plate cutting, MDF photo frame cutting, building model cutting.

Laser engraving and cutting machines are suitable for various types of wood (including plywood and MDF), and these materials can be cut with lasers, but some oily woods have a risk of ignition and should be used with special care.

The Dowin Laser Cloth Cutter is much faster than manual cutting methods and can cut a wide variety of complex materials. Laser cutting can be automated, setting the cutting speed, and one person can guard multiple machines at the same time, thus saving labor costs for enterprises.

Dowin laser fabric cutting machines are available in a variety of configurations, and customers can choose according to their own needs when buying machines.
DWOIN
1814/1610/1825/1630 has the choice of single-head, double-head, and four-head laser heads, and can be customized according to customer needs for double-head synchronization or double-head asynchronous.
When choosing a laser fabric cutting machine, you can contact our staff to choose the most suitable laser machine for you

CO2 laser engraving and cutting machine product features
1. Imported original guide rail, stable cutting and high precision.
2. Adopt advanced computing control system, stable performance; non-contact working mode, no deformation of cutting material, no burning edge.
3. The processed material is more beautiful.

CO2 laser engraving and cutting machine is widely used in the engraving and cutting of non-metallic materials. Infrared light from CO2 lasers is also suitable for marking organic materials, including paper, leather materials and wood products

With the rapid development of society today, the application of large-format laser cutting machines can promote the development of the market and become the main processing tool for users.
Advantages of CCD large format laser cutting machine:
*Concise structure
*Large cutting format, suitable for many cutting materials
*Easy to operate
*The laser runs stably
*Low maintenance cost

The CO2 laser engraving and cutting machine does not directly contact the processing material when cutting the material, and is not limited by the shape of the cutting material, which can better protect the material

The Main Features of 1390 laser cutter 100w
1) Ruida 6445 controller + Hiwin guide rail + Leadshine motor and driver + American ⅡⅥ imported focus lens.
2) Front to rear design, suitable for large materials
3) CWG Laser tube or Reci tube optional ( 10000 hours work life-span ).
4) Electrical up and down blade work table, 1300mm*900mm work area, lift distance 300mm

Laser fabric cutting machines are widely used in the cutting of custom patterns
Minimum shaping character: Chinese character 2mm/ letter 1mm
Resetting positioning accuracy: ±0.01mm
Voltage: Ac220v±10%, 50HZ/60HZ
Graphic Format Supported: BMP,HPGL (PLT), DXF, G-CODE, DST,AutoCAD, CorelDraw, CAD CAM, AI, Photoshop

Billboards, medals, lamps, aquariums, accessories, etc. are commonly seen in life. These are all irradiated by the acrylic laser cutting machine to the surface of the workpiece with a laser beam, so that the workpiece reaches the melting point or boiling point, and the high-pressure gas coaxial with the beam will melt. or vaporize and blow away

Configuration of laser cloth cutting machine:
*Slide rail: high quality Taiwan rail
*Laser tube: co2 laser tube such as CDWG\RECI
* Lens: imported high quality lens
*Bed bed: processed with seamless welding technology
*Mesa: stainless steel integral countertop, with small machining accuracy error

The Application of Auto Fabric Cutting Machine:
CCD laser cutting machine is equipped with advanced Vision system.Camera auto positioning and Laser cutting applied on printed fabric, such as digital printed apparel, sublimated sports garment, cycling clothes, racing suits, swimming suit, printed toys, carpet, home furnishing, banners, flags and so on.

DOWIN 1390 co2 laser cutting machine is a best selling laser engraver cutter. The working area is 1300*900mm, with a water cooler, exhaust fan, and air pump built inside of the machine which is very compact, clean, and modern.

Equipped with CCD and automatic feeding device, DOWIN laser cloth cutting machine is a powerful laser cloth cutting machine.
Highlights of Laser Cutting Machines
* High resolution camera positioning
*CCD vision software
*Automatic laser cutting system
*Humanized operating system

The 1390 CO2 laser cutting machine uses a focusing mirror to focus the CO2 laser beam on the surface of the material to melt the material, and at the same time, use the compressed gas coaxial with the laser beam to blow away the melted material, and make the laser beam and the material move relatively along a certain trajectory. , so as to form a certain shape of the slit.
The advantage is:
Good cutting quality: non-contact cutting, the cutting edge is less affected by heat, there is basically no thermal deformation of the workpiece, and the slump formed when the material is punched and sheared is completely avoided, and the cutting seam generally does not require secondary processing.

The 1610 laser fabric cutting machine uses laser to cut without causing mechanical pressure to the items, and the cut products have good effect.
The 1610 laser cloth cutting machine has very good cutting speed and precision, runs smoothly, the incision is fine and clean, and also has the characteristics of safe operation, which is gradually replacing the traditional cutting method.
When using traditional cutting machines to cut various fabrics, the production cost is too high and the production cycle is long. Using the 1610 automatic feeding laser cloth cutting machine greatly avoids these problems,

CO2 laser engraving and cutting machine can cut quickly at work, with small heat-affected zone and small deformation, which can protect the workpiece to the greatest extent and improve the cutting accuracy

When the laser cutting machine cuts non-metallic materials, the mechanical part of the laser engraving and cutting machine has no contact with the workpiece, and will not scratch the surface of the workpiece during work; the laser cutting speed is fast, the incision is smooth and flat, and generally no follow-up processing is required.

This fabric laser cutter especially applied in fabric and garments industry.
-Automatic Feeding and Rolling System — Save man power and greatly reduce costs.
-Fabric laser cutter is suitable for engraving and cutting on very long work piece, such as one roller of cloth, fabric, leather, garment.
-Top-level configuration, such as: Ruida control system,Taiwan guide rail, famous laser tube, Leadshine drive,57 motor, etc.
-Double heads (Optional) with high efficiency and effectiveness work simultaneously.

Application of 100w 1610 automatic feeding laser cloth cutting machine:
Laser cloth cutting machine is mainly used in cotton, linen, leather, paper, chemical fiber and other textile and clothing fabrics
Features of 100w 1610 automatic feeding laser cloth cutting machine:
–Adopt non-contact cutting industry to reduce the deformation of cloth
–The laser machine is equipped with an automatic feeding device, which is suitable for cutting various flexible materials
–High cutting accuracy, no deformation of cutting materials

1390 CO2 laser engraving and cutting machine can be used to engrave and cut MDF. MDF is a board made of wood fiber or other plant fibers, coated with synthetic resin, and pressed under heating and pressure conditions.
1390 MDF can be used to make 3D crafts, and acrylic crafts can also be made

DOWIN Big vision auto Cloth laser cutting machine with ccd camera to one time realization the high precision imaging, which is including the large-format and multi-pattern.The characteristics of these auto cloth cutting machine, mutual recognition of disposable cutting multiple pattern, automatic find the border to correct the flexible and variability image, perfect solve the problem caused by material deformation and stretching. This machine adopting high precision stepper motor, automatic feed, automatically capture the border and cutting speed is 2.5 times than of the traditional, which is the best choice of modern high-speed fully automatic large enterprise.

The laser fabric cutting machine mainly uses the CO2 light source. It turns out that the CO2 laser cutting machine has a very large advantage in the texture of softened materials such as cutting fabrics and textiles.
Laser fabric cutting machine cutting the fabric more accuracy and faster speed, which greatly improves productivity and work efficiency

CO2 laser engraving and cutting machine is mainly suitable for the engraving and cutting of non-metallic materials, such as wood, acrylic, foam, etc.
Compared with the traditional cutting method, the laser engraving and cutting machine has high efficiency and fast cutting speed

DW-1390 is the best selling co2 laser engraving and cutting machine from DOWIN Laser.DW-1390 has a 1300*900mm working area, and scan speeds of up to 2000 mm/second. And main configuration includes S&A CW5200 water chiller and electrical moving table. A fast machine can meet you more needs and brings you more benefits.

Engraving Area: 600mm*900mm
Laser Type: CO2
Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT
Condition: New
CNC or Not: Yes
Cooling Mode: WATER COOLING
The above configuration can be changed according to user requirements

Application:
Laser processing can be carried out on bamboo, crystal, horn, paper plate, plexiglass, marble, cloth, leather, rubber, plastic and
other non-metallic materials.Clothing, embroidery, cloth toys, home decoration cloth, handbags, gloves, toy industry leather, leather cutting and surface carving.
3）

Features：
1. Safety protection electrical design。
2. Intelligent Marble engraving
3.Intelligent Protection System
4.Cover open protection system
5.Honey Comb Platform

Compared with the traditional engraving method, the laser engraving machine has excellent line effect, deep engraving, and three points into the wood. It is by no means comparable to the effect of ink processing, and it will never fall or fade.
The engraving content of the CO2 laser engraving machine is more refined, more economical and environmentally friendly

Wooden three-dimensional puzzles actually belong to the puzzle category in toys. It is a DIY toy that integrates knowledge and appreciation. CO2 laser engraving and cutting machines are widely used in wood cutting, and flat boards are assembled into various three-dimensional models.

The automatic feeding laser engraving and cutting machine is a professional automatic feeding laser cutting machine developed for clothing accessories. The machine is suitable for continuous work, meets the requirements of factory processing services, and has good stability and continuity.

The co2 laser engraving and cutting machine is mainly used for engraving and cutting on non-metallic materials.
Dowin laser engraving and cutting machine has fast cutting speed, no burr in the incision, no deformation in the slit, high precision, high efficiency and is not affected by the processing shape, easy to operate, suitable for large batches, multiple varieties, high-speed and high-precision production and processing client

The automatic feeding laser cloth cutting machine with camera has the characteristics of high precision, fast cutting, not limited to cutting pattern restrictions, and low processing cost.
Processing area ：1600*1000mm/1800*1400mm
Auto feed cutting table：yes
Cutting Speed: 0-18000mm/min
Camera: Canon
laser tube power:  80W/100W/130W/150W