Best Quality Rubber Stamp Seal Material for Laser Engraving

How you can use Dowin laser laser machine to cut and engrave rubber sheet?
With a laser engraving machine you can cut and engrave texts with particularly small fonts, logos with fine details or even images on rubber. The laser machine enables you to produce stamps efficiently, cost-effectively and in an environmentally-friendly manner. This creates rubber stamps with the highest precision and with a clean, detailed imprint quality. The use of chemicals is therefore unnecessary. You can also laser cut or engrave rubber for many other areas of application, e.g. arts & crafts or outdoor signage.

The advantages of co2 laser engraving cutting machine:

1. Wide range: CO2 laser can engrave and cut almost any non-metallic material. And it’s cheap!

2. Safe and reliable: non-contact processing will not cause mechanical extrusion or mechanical stress to the material. No “knife marks”, no damage to the surface of the workpiece; no deformation of the material;

3. Precise and meticulous: the machining accuracy can reach 0.02mm;

Rubber stamps are generally engraved by hand or laser engraved, and most of the stamps are now engraved by laser stamp engraving machines.
The stamp engraved by the laser stamp engraving machine is more fine and suitable for the engraving of complex patterns. Compared with traditional manual engraving, laser stamp engraving machine has higher precision and higher efficiency.

1390 Co2 laser cutting machine is widely used in electronic, craft and gift, garment, leather, toy, computerized embroidery, packing and printing, shoe making, furniture, advertising industries ect.
Application:
1) Acrylic engraving and cutting
2) Wood/MDF engraving and cutting
3) Leather engraving and cutting
4)Paper engraving and cutting
5) Rubber sheet engraving and cutting
6) Double color board & coated board engraving
7) Marble and stone engraving

1390 Co2 laser cutitng machine Applicable materials
Wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper, leather, rubber, ceramic, glass and other nonmetal materials.

Applicable industries
Advertisement, arts and crafts, leather, toys, garments, model, building upholster, computerized embroidery and clipping, packaging and paper industry.

1)the latest optical, mechanical and electrical integration of technology and design of high-tech products.
2)appearance, performance, accuracy to achieve the perfect combination of both.

This type 1390 laser cutter machine is a kind of laser engraving machine system equipped with Co2 laser tube,it is used to engrave on acrylic, PVC, rubber sheet, plastic, crystal, glass, wood, bamboo, oxhorn, figuline,marble, leather, cloth, double-color board, etc. nonmetal materials .

“对比深雕的传统方式，激光深雕印章具有无污染、精度高、雕刻内容灵活、可满足复杂雕刻工艺等优势。

”

The Main Features of 1390 laser cutter 100w
1) Ruida 6445 controller + Hiwin guide rail + Leadshine motor and driver + American ⅡⅥ imported focus lens.
2) Front to rear design, suitable for large materials
3) CWG Laser tube or Reci tube optional ( 10000 hours work life-span ).
4) Electrical up and down blade work table, 1300mm*900mm work area, lift distance 300mm

The suitable material
Wood products, paper, leather, cloth, plexiglass, epoxy resin, acrylic, wool, plastic, rubber, ceramic tile, crystal, jade, bamboo products and other non-metallic materials.
This type of machine is suitable for clothing, leather, cloth toys, computer embroidery and cutting, electronic appliances, models, handicrafts, advertising and decoration, packaging and printing, paper products and other industries.

The laser rubber seal engraving machine needs to use a fan when it is working. After the fan works for a period of time, a large amount of dust will accumulate in the fan and the exhaust pipe, and the dust will affect the exhaust efficiency of the fan. Maintenance method: Loosen the hose clamp connecting the exhaust pipe and the fan, remove the exhaust pipe, and clean the dust in the exhaust pipe and the fan.

Co2 1390 CNC Laser Cutting Edge Features:

ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to around 8cm or be fully retracted, allowing more control over different focal distance setups.
AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise.
Front REAR PASS THROUGH: There’s always extra room! And it can accommodate materials larger than the workbed size.
BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine.

The Applicable Industries of 100W Laser Cutter:
Rubber,plastic,cloth toys,leather ,computer embroidery cutting, mould, crafts ,bamboo and wood, advertising and building decoration ,packaging and printing ,paper products.

Seal engraving is different from the engraving of general non-metallic materials, and requires high precision of the machine. When engraving rubber materials, a professional seal engraving machine should be used.
Dowin laser stamp engraving machine is a professional stamp engraving equipment, with higher engraving precision and flexibility, which can meet the needs of customers who want to paint more

The Dowin laser seal engraving machine is specially designed for engraving seals. The system and configuration of the laser engraving machine are converted into seal engraving design. The engraving accuracy and engraving effect are good, which can meet the various needs of customers.

Advertising industry: trophies, authorization card, dual color plates, acrylic etc.,processing
Office Industry: menus, recipes, tender, invitations, personalized business cards etc., processing
Packaging Industry: wine box, tea packing box etc., processing
Gift Industry: glass cup, bamboo etc., crafts Processing
Decoration Industry: grilles, tiles etc., engraving and cutting
Printing Industry: rubber, printed version

The engraving depth is related to factors such as the absorption of the laser by the engraved material, the power of the laser, and the duration of the laser on the engraved material. The laser can perform deep and shallow engraving on the surface of various materials, such as engraving identification codes, trademarks and more complex images.

Stone Laser engraving Machine
Model:DW-6090/DW-1390
Working area:130cm*90cm
Laser power:80W-150W
Laser type:CWG CO2 laser tube,water-cooled
Engraving speed:0-60000mm/min
Laser Output:1-100%software setting
Resetting positioning accuracy:≤±0.01mm
Power supply:220V/50HZ , 110V/60HZ
Operating temperature:0 – 45°C
Operating humidity:5 – 95%
Min. shaping character:English 1.0 x 1.0mm
Graphic format supported:BMP, PLT, DST, DXF, AI
Software supported:Ruida, PhotoShop, Lightburn
Driving system：Leadshine 57 stepper motor

CO2 engraving machine is not limited by the number of processing, for small batch processing services, laser processing is cheaper

Dowin rubber stamp laser engraving machine is used specially for the engraving of rubber stamps, small area art crafts, gifts and decoration.

It is suitable for Plexiglas, wood, density board, card, double-color board, leather, glass; compose diamond, horn, plastic, the nonmetal materials such as press used rubber plate

The Application of Ruida Co2 Laser Cutting Machine:
Acrylic Acrylic, Plexiglass, PMMA, Perspex, Organic board, Double color sheet, Wood, Plywood, Veneer, MDF, Balsa, Leather, PU, Shoe Material, Synthetic Leather, Genuine Leather, Fabric, Cloth, Textile
Carpet, Mat, Rug,Wool Felt, Paper, Cardboard, Chipboard, Press Board
Ceramic,Tile, Marble, Glass, Plastic

Co2 Laser Cutting Machine apply to leather, cloth anticipates, rubber, plastics, the wood of bamboo, bag clothing, shoe, engraving with incising.
Co2 Laser Cutting Machine is applicable to package area, embroidery house Spin and weave, trademark, template the paper products, ABS PVC Signs, etc.

Co2 1390 CNC Laser Cutting Edge Features:

RUIDA DIGITAL CONTROLLER: The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8.
LINEAR RAIL GUIDING SYSTEM: Equipped with X and Y stepper motors for efficient power transmission between the guide rails with high precision and long service life.
RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine’s path, and identifies positioning sizes, allowing an effortless project setup process.

Dowin laser engraving machine cutting machine adopts imported focusing lens, which has high light transmittance, low reflection of double-sided anti-reflection coating, stable light spot, clean and scratch-resistant.

Made in China high technology 1390 cnc 130w co2 laser cutting engraving machine for wood
✦Applicable Materials:
Our Dowin high quality 130W CO2 laser cutting and engraving machine is usually used in acrylic,wood, leather, paper, plexiglax,rubber and other nonmetal materials

DW-6040 laser engraving and cutting machine adopts Ruida 6445 control system, and is equipped with automatic lifting system and automatic focusing function. In addition to meeting basic engraving needs, it can carry out high-precision stamp engraving

Laser engraving and processing stamps requires relatively high laser power to achieve a certain level of production efficiency. The greater the laser power, the faster the laser engraving speed.

The co2 laser engraving machine is an engraving machine using co2 laser technology. This type of laser equipment is a general-purpose model with a rear focus method, small size and high degree of integration.
The laser beam is transmitted and focused on the surface of the material by the optical mechanism, and the material at the action point of the high-energy density laser beam is rapidly vaporized to form pit points, thereby realizing engraving and cutting.

Suitable material
Wood products, paper, leather, cloth, plexiglass, epoxy resin, acrylic, wool, plastic, rubber, ceramic tile, crystal, jade, bamboo products and other non-metallic materials.
High-power CO2 lasers can also cut metal materials.

The DOWIN CO2 laser engraving and cutting machine has obvious advantages. The optimal design of the mechanical structure and the smallest overall size of the machine not only saves your precious space, but also the structure should not be deformed and the cutting precision is high. Taiwan imported square linear guide, long service life.

The smoke purifier used in the co2 laser engraving machine manufactured by Dowin has strong suction, flexible movement, adjustable air volume, multiple filtration, energy saving and environmental protection.

CO2 laser engraving machine adopts EFR laser tube, which has stable machine performance and long service life, which is very suitable for engraving rubber seals and other products

6090 1390 Co2 laser cutting machine widely used in electronic, craft and gift, garment, leather, toy, computerized embroidery, packing and printing, shoe making, furniture, advertising industries ect.
Application:
1) Acrylic engraving and cutting
2) Wood/MDF engraving and cutting
3) Leather engraving and cutting
4)Paper engraving and cutting
5) Rubber sheet engraving and cutting
6) Double color board & coated board engraving
7) Marble and stone engraving

Dowin adopts CW-3000 water cooler, economical cooling device, easy to install and operate, compact and easy to move, good cooling effect, specially designed for CO2 laser engraving machine.

High Precision130W Lazer Engraving Machine Wood Co2 CNC Laser Cutting Machine can automatically adjust the working table to satisfy the demands of cutting different thicknesses materials. The lifting height can reach 35cm.

6090 Co2 laser engraving machine can be used to engrave and cut non-metallic materials. According to different materials and thickness, we sell DW-6090 with different powers: 60W, 80W, 100W, 130W and 150W. You can also choose different accessories, such as water cooler chiller, standard rotation and simple rotation.

This type 1390 laser cutter machine is a kind of laser engraving machine system equipped with Co2 laser tube,it is used to engrave on acrylic, PVC, rubber sheet, plastic, crystal, glass, wood, bamboo, oxhorn, figuline,marble, leather, cloth, double-color board, etc. nonmetal materials .

The Co2 Laser Cutting Machine Application:
1) Acrylic engraving and cutting
2) Wood/MDF engraving and cutting
3) Leather engraving and cutting
4)Paper engraving and cutting
5) Rubber sheet engraving and cutting
6) Double color board & coated board engraving
7) Marble and stone engraving

The 3040 CO2 laser engraver can be used to engrave and cut a wide variety of materials, such as wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics, and glass.
Widely used in advertising, gifts, shoe materials, toys and other industries.
At the same time, the CO2 laser engraving machine has various image formats such as HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI and so on.

Dowin stone laser engraving machines can engrave stone, granite, and tombstone. Stone laser engraving on stone produces a result similar to sandblasting or acid etching: a surface engraving that gives the impression that the stone has been bleached. Letters, photographs, and logos can be permanently printed on stone.

The ruida RDC6445G of Dowin laser engraving machine is a high-performance control system for laser engraving or cutting manufacturing, which can achieve 360-degree engraving effect. It is an ideal control system for clothing, leather cutting, plexiglass cutting, rubber engraving and other industries.

The Application of stone laser engraving machine:
It is widely used in cutting, engraving, through-carved, hole drilling on fabric, garment, leather, wood and bamboo, acrylic, craft and gift, marble and granite, ceramic, glass and other non-metal materials. Mainly applicable for engraving for heavy materials, such as gravestone, granite, marble etc.

6090 Co2 lazer engraving machine 80W 100W 130W 150W PCB circuit board lazer cutting machine.CO2 laser engraving machine with a working area of 600*900mm. It can be used to engrave and cut non-metallic materials.

Two different models 1390 100W co2 laser cutting machines, one is slim model with around 15cm up-down table, can pass 90cm door and can load 24 sets in one 40HQ. Other is standard model with around 30cm up-down table and with 4 cbm.

Compatible Materials:

Laser Cutting:
Acrylic,Wood,Leather,Plastics,Fabrics,MDF,Cardboard,Paper,Corian,Foam,Fiberglass,Rubber…
Marking/Engraving:
Acrylic,Wood ,Leather,Plastics,Fabrics,Glass,Rubber,Cork,Brick,Granit,Marble,Tile,River Rock,Bone,Melamine,Phenolic

Standard accessories
(01)Laser Engraving software Package(English Version)
(02)User Manual(CD)
(03)Industry water cooling system(Chiller)
(04)Airexhaust fan
(05)Air Pump
(06)Communication cable
(07)3 Reflect optics(installed in the machine)
(08)1 Focus optics(installed in the machine)
(09)1 Laser tube
(10)Other tools

CO2 lasers can engrave and cut almost any non-metallic material. The price of CO2 engraving machine is also relatively cheap, and this is used in many industries, such as advertisement, arts and crafts, leather, toys, garments, model, building upholstery, computerized embroidery and clipping, packaging and paper industry

Rubber stamp engraving machine is mainly application for rubber stamp making , with super accuracy and high precision , engraving and cutting effect very smoothly, no glitch, even if mini letters can show super clear 

The applicable industries of 1325 co2 laser cutting machine:
This type of machine is suitable for clothing, leather, cloth toys, computer embroidery and cutting, electronic appliances, models, handicrafts, advertising and decoration, packaging and printing, paper products and other industries.

Stone laser engraving machines can engrave stone, granite, and tombstone. Stone laser engraving on stone produces a result similar to sandblasting or acid etching: a surface engraving that gives the impression that the stone has been bleached. Letters, photographs, and logos can be permanently printed on stone.

Notes on using 6040 CO2 engraving machine
1. When using auto focus, pay attention to the fact that the auto focus rod must be fastened, otherwise the work surface will hit the laser.
2. When the laser engraving machine is working, it is forbidden to open the cover.
3. Turn on the smoke exhaust and blowing equipment during processing.

For many entrepreneurs who like engraving or niche, laser engraving machines are very good helpers.
Common laser engraving machines have sizes of 3040, 6040, 6090, 1390 and so on. DOWIN 3040 laser engraving machine is specially designed for laser stamp engraving with high engraving precision

The best way is to use an ultrasonic cleaner, of course, it is also possible to use a detergent to scrub with water.
After using the laser stamp engraver

The Dowin Acrylic Laser Cutting Machine Application:
It is widely used in electronic, craft and gift, garment, leather, toy, computerized embroidery, packing and printing, shoe making, furniture, advertising industries ect.
Application:
1) Acrylic engraving and cutting
2) Wood/MDF engraving and cutting
3) Leather engraving and cutting
4)Paper engraving and cutting
5) Rubber sheet engraving and cutting
6) Double color board & coated board engraving
7) Marble and stone engraving

The Application of stone laser engraving machine:
It is widely used in cutting, engraving, through-carved, hole drilling on fabric, garment, leather, wood and bamboo, acrylic, craft and gift, marble and granite, ceramic, glass and other non-metal materials. Mainly applicable for engraving for heavy materials, such as gravestone, granite, marble etc.

The application of 1325 co2 laser cutting machine
1) Acrylic engraving and cutting
2) Wood/MDF engraving and cutting
3) Leather engraving and cutting
4)Paper engraving and cutting
5) Rubber sheet engraving and cutting
6) Double color board & coated board engraving
7) Marble and stone engraving

The compatibility Dowin laser cutting machine

The Ruida control board works seamlessly with RDWorks for Windows PC (included) and LightBurn (not included)
RDWorks (included) and LightBurn (not included) are compatible with Windows 7, 8, 10 (64/32 bit), XP, 2000, and Vista.
The Ruida controller is compatible with macOS (Version 10.11 and higher) ONLY if you use LightBurn software (not included)
Photo-ready to convert images from HPLG, BMP, GIF, JPG, JPEG, DXF, DST, AI formats, and more into .RD files for laser processing.
4-Pin Port connection for rotary axis devices.