1390 Stone Engraver Ceramic Tile Laser Engraving Cutting Machine 100W Laser Engraver 100W

Specifications

Working size: 30*40cm
Laser power: 40W
Max speed: 0-300mm/s
Packing size: 100*80*59cm
Packing Weight: 78KG

Features of the engraving machine
Air assist,remove heat and combustible gases from the cutting surface.
Intuitive control panel, set speed, power and more controls directly from the laser

The Applicable materials of DW-6040 seal engraving machine
Wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper, leather, rubber, ceramic, glass and other nonmetal materials.

Now seal engraving generally uses materials such as hard glue and rubber as the bottom surface of the seal. Using a small laser engraving machine to engrave the pattern of the seal greatly improves the production efficiency and reduces the production cost.

The common problems of laser engraving and cutting machine when working are that there is no laser when working, or sometimes there is no laser.
What should the laser engraving and cutting machine do when this problem occurs, how to detect and how to deal with it?
Dowin Laser has a complete service system to assist in solving this problem

The biggest advantage of laser seal engraving machine when engraving seal is that the size of text and pattern can be controlled, the content can also be changed, and the engraved pattern is also relatively fine.

Before using the CO2 laser engraving and cutting machine, read the instructions carefully and understand the basic steps and methods of machine operation.
When using the laser engraving and cutting machine, operate in strict accordance with the instructions of the laser machine, keep the work surface clean, improve work efficiency, and prolong the service life of the CO2 laser engraving machine

Dowin can provide certifications:

FDA Compliant
CE Certification
ISO Quality Certification

Power:
The integrated HY/ZY power supply features increased response speed, dependable performance, and cutting power – it’s beaming with possibilities!
A secondary LCD display panel monitors the electric current and auto-judges fault, reducing potential damage to the laser tube and power supply.
Cut up to 28 thick acrylic/plexiglass
Uses standard 110V/220V AC power connection

Features of the machine
Adjustable speed and power, smooth and precise engraving and cutting USB interface, U-flash disk supported, work with a PC

The patterns and texts engraved by laser stamps are very fine. Due to the small size after laser focusing, the small heat-affected area and the fine processing, some processes that cannot be achieved by conventional methods can be completed.

Dowin adopts CW-3000 water cooler, economical cooling device, easy to install and operate, compact and easy to move, good cooling effect, specially designed for CO2 laser engraving machine.

Wood, mobile phone cases, acrylic, billboards, etc. are widely used in daily life, DOWIN laser engraving machine can meet the engraving and cutting of non-metallic materials.

If you are a customer who has just started a business, you can rely on the laser engraving machine to engrave mobile phone cases, expand customer sources and increase income

1.DW-1390 CO2 laser engraving machine, able to engrave and cut various non-metals, like acrylic, double-color plate, marble, wood, MDF, plywood, textile, leather, glass, paper etc.

2.Widely applied in craft gifts, souvenir, Chinese paper cutting, advertising signs, clothes, furniture and many other industries.

3.Fast engraving and cutting speed, high precision. Can be configured with up-down lifting table, honeycomb table, rotary, etc.

4.Machine working size can be selected according to your needs.we have 600x400mm, 900x600mm, 1300x900mm, 1400x900mm, 1600x1000mm, 1300x2500mm, and so on.

The Application of Ruida Co2 Laser Cutting Machine:
Acrylic Acrylic, Plexiglass, PMMA, Perspex, Organic board, Double color sheet, Wood, Plywood, Veneer, MDF, Balsa, Leather, PU, Shoe Material, Synthetic Leather, Genuine Leather, Fabric, Cloth, Textile
Carpet, Mat, Rug,Wool Felt, Paper, Cardboard, Chipboard, Press Board
Ceramic,Tile, Marble, Glass, Plastic

Using a laser stamp engraving machine can minimize production costs and improve production efficiency. The use of stamp laser marking machine can be mass-produced to meet the increasing daily needs

Using laser engraving can improve the efficiency of glass engraving, make the surface of the engraved place smooth and round, quickly reduce the temperature of the engraved glass, and reduce the deformation and internal stress of the glass. Even if the glass object is cylindrical, it can still be engraved by using the rotary attachment. Laser machines are ideal for processing and creating beautiful glass designs because they are less expensive, more flexible, faster and easier to operate.
● Personal Engraving ● Promotional Materials ● Optical ● Decorations ● Gifts ● Interior Design ● Bottomless Drinking Cups ● Mirrors

Stone laser engraving machines can engrave stone, granite, and tombstone. Stone laser engraving on stone produces a result similar to sandblasting or acid etching: a surface engraving that gives the impression that the stone has been bleached. Letters, photographs, and logos can be permanently printed on stone.

Dowin has accumulated many years of professional production experience, pursues excellence in design materials and workmanship, regards quality as the life of the enterprise, and uses a strict quality management system to meet national quality standards.

Dowin stepper motor, the shell is made of high-quality steel, with long service life, energy saving and quietness, stable operation, proper coordination of all parts, high-precision mold making, accurate size, and smooth operation in high and low temperature environments.

Dwoin laser engraving machine as a CNC engraving machine has the function of a CNC engraving machine, converting the pattern into a signal, and then converting the signal into the track of the engraving machine movement

Dowin Technology produces 6040 co2 laser engraving cutting machine with high quality! Module Linear with high accuracy,for long woking time. S&A CW3000 water chiller,can cool the laser tube down fastly and easily. Ball screw electrical moving table …

The laser rubber seal engraving machine needs to use a fan when it is working. After the fan works for a period of time, a large amount of dust will accumulate in the fan and the exhaust pipe, and the dust will affect the exhaust efficiency of the fan. Maintenance method: Loosen the hose clamp connecting the exhaust pipe and the fan, remove the exhaust pipe, and clean the dust in the exhaust pipe and the fan.

Our co2 laser engraving amchine with higher precision and higher quality.

(1) Cutting:
acrylic,perspex,wood,MDF,plywood,veneer,paper,leather,rubber,fabric,cloth,canvas,foil,leather,fur,foam,plastic,PES,PC,PA,PE,PP,composite material,PVC, etc.
(2) Engraving:
acrylic,perspex,wood,MDF,plywood,stone,marble,glass,jade,crystal, metal coating,paper,leather,rubber,fabric,cloth,plastic,PVC, etc.

Laser engraving is to use the computer to control the x-y console to drive the laser head to move and control the switch of the laser as required. The image information processed by the software has been stored in the computer in a certain way. When the information is read from the computer in sequence, The laser head scans back and forth line by line from left to right and top to bottom along the scanning track.
The 3040 laser engraver meets the engraving needs of most materials

Applicable industries
This type of machine is suitable for clothing, leather, cloth toys, computer embroidery and cutting, electronic appliances, models, handicrafts, advertising and decoration, packaging and printing, paper products and other industries.

The Dowin Acrylic Laser Cutting Machine Application:
It is widely used in electronic, craft and gift, garment, leather, toy, computerized embroidery, packing and printing, shoe making, furniture, advertising industries ect.
Application:
1) Acrylic engraving and cutting
2) Wood/MDF engraving and cutting
3) Leather engraving and cutting
4)Paper engraving and cutting
5) Rubber sheet engraving and cutting
6) Double color board & coated board engraving
7) Marble and stone engraving

The Dowin laser seal engraving machine is specially designed for engraving seals. The system and configuration of the laser engraving machine are converted into seal engraving design. The engraving accuracy and engraving effect are good, which can meet the various needs of customers.

The RDC6445G controller includes more complete and better motion control functions, large-capacity file storage, more compatible dual-channel independent adjustable laser power control interface, and more compatible U disk driver.

In the wood engraved by laser, since each wood has its own characteristics, we should choose the wood according to the specific object we want to engrave. We recommend researching the characteristics of the engraving machine before engraving unfamiliar woods.

The stamp laser engraving machine can perform deep engraving and shallow engraving on the surface of a variety of non-metallic materials, such as engraving identification codes, trademarks and more complex

Dowin’s laser cutting machine board adopts RDC6445G system, which has better hardware stability and better anti-high voltage and anti-static interference characteristics.

The Module linear of DW-6040 Laser engraver 4060.
Module Linear is made of high-strength special steel to ensure that the laser machine does not deform continuously for a long time. Improve laser engraving and cutting accuracy and extend the working life of the machine.

6090 Co2 laser cutting machine FEATURES:
100W Co2 Laser tube
RUDIA 6445 control system, support output from RUIDA directly
CW5200Water chiller, which ensures the service life of laser tube efficiency.
Standard red dot positioning system, auto focus function help operators to locate laser beam easily.

The rubber laser engraving machine adopts an open working platform to facilitate the placement of the processing materials, and can cooperate with the assembly line to meet the processing of large rubber materials.

100W Co2 Laser Cutting Machine Engraver for Stone Overall :
1. Installed high quality laser tube, can work 3000~10,000 hours (depend on laser power).
2. Transmit files directly from RUIDA and Lightburn,Photoshop, Tajima directly.
3. Adopt HIWIN guide rail with high quality
4. Electrical moving table makes thicker material engraving and utting more easy.

The main features of 1390 laser cutting machine :
The unique decelerate design make the mechanical system move stably and smoothly. The edge of cutting is smooth and there is no sawtooth. The software adopts conyinuous curve method to get faster cutting speed

The principle of laser engraving is that the laser beam is transmitted and focused on the surface of the material by the optical mechanism, and the material at the action point of the high-energy density laser beam is rapidly vaporized to form pits.
Mainly used in the engraving and cutting of non-metallic materials, such as wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper

The Package of 1390 Co2 laser cutting machine Includes:
1 x Laser Engraver Machine
1 x Water Chiller
2 x Water Hoses
1 x Grounding Wire
1 x Exhaust Fan
1 x USB Cable
1 x USB Drive with Software
10 x Hex Wrenches
1 x Double-sided Tape
1 x Power Cord
1 x Accessory Bag
2 x Keys
1 x Silicone Sealant
1 x Instruction Manual

Dowin laser rubber stamp engraving machine will be very easy to engrave rubber stamps with it. All you need to do is to draw a picture in CAD or CORELDRAW software, then load the file in the laser software and send it to the machine. Press the “Start” button and the cutting or engraving job will be completed in a short time.

The engraving accuracy of Dowin laser machines is very high, and the quality of the engraved products is very good. What’s more, you only need to spend a few minutes to complete a stamp, which is very efficient. Customers will be very happy to place an order if they know they don’t have to wait to get their exclusive stamp right away.
Dowin laser rubber stamp engraving machine will be very easy to engrave rubber stamps with it. All you need to do is to draw a picture in CAD or CORELDRAW software, then load the file in the laser software and send it to the machine. Press the “Start” button and the cutting or engraving job will be completed in a short time.

The engraving accuracy of Dowin laser machines is very high, and the quality of the engraved products is very good. What’s more, you only need to spend a few minutes to complete a stamp, which is very efficient. Customers will be very happy to place an order if they know they don’t have to wait to get their exclusive stamp right away.

Wood, mobile phone cases, acrylic, billboards, etc. are widely used in daily life, DOWIN laser engraving machine can meet the engraving and cutting of non-metallic materials.

If you are a customer who has just started a business, you can rely on the laser engraving machine to engrave mobile phone cases, expand customer sources and increase income

The 6040 laser engraving machine is widely used, and it is commonly used in the advertising industry and the clothing industry. The advantage of laser processing is that it can quickly engrave and hollow out various patterns on the surface of various upper materials. Since laser processing is a non-contact processing method, it will not produce any external deformation on the upper. It also has many advantages such as high engraving precision, hollow without burrs, and can process any shape.

When using the rubber laser engraving machine, pay attention to the maintenance of the laser head. The laser head is the main tool for work. In order to prolong the life of the laser head, our small engraving machine should try to rest for about 10-15 minutes after engraving for 50 minutes.

The Application of stone laser engraving machine:
It is widely used in cutting, engraving, through-carved, hole drilling on fabric, garment, leather, wood and bamboo, acrylic, craft and gift, marble and granite, ceramic, glass and other non-metal materials. Mainly applicable for engraving for heavy materials, such as gravestone, granite, marble etc.

1325 Co2 laser cutting engraving machine is widely used in electronic, craft and gift, garment, leather, toy, computerized embroidery, packing and printing, shoe making, furniture, advertising industries ect.
Application:
1) Acrylic engraving and cutting
2) Wood/MDF engraving and cutting
3) Leather engraving and cutting
4)Paper engraving and cutting
5) Rubber sheet engraving and cutting
6) Double color board & coated board engraving
7) Marble and stone engraving

The machine’s top cover can hold on anywhere, independent feeding port, easy to operate. Integrated top cover with large visible area and bright lighting.

Advantages and disadvantages of traditional mechanical processing seals: traditional process applications such as machining for engraving depth, the waste and coolant generated will also cause environmental pollution. Although the efficiency is improved, the accuracy is not high, and sharp angles cannot be engraved.
Laser stamp engraving machine can overcome this shortcoming

Dowin stepper motor, the shell is made of high-quality steel, with long service life, energy saving and quietness, stable operation, proper coordination of all parts, high-precision mold making, accurate size, and smooth operation in high and low temperature environments.

CO2 engraving machine is very efficient. The CO2 engraving machine has no “knife marks” during use, and does not damage the surface of the workpiece

Co2 Laser Cutting Machine apply to leather, cloth anticipates, rubber, plastics, the wood of bamboo, bag clothing, shoe, engraving with incising.
Co2 Laser Cutting Machine is applicable to package area, embroidery house Spin and weave, trademark, template the paper products, ABS PVC Signs, etc.

The advantages of DW-6040 Laser engraving cutting:
1.It has very low maintenance costs and cheap parts for replacement,
2.it use module linear and can delivers precise cuts with smooth finishe,
3.It can switch quickly between multiple applications and setups, reducing time wastage and the need for multiple machines

In our daily engraving process, the engraving depth of the rubber seal engraved by the laser engraving machine is related to factors such as the absorption of the laser by the engraved material, the power of the laser, and the time of the laser on the engraved material.

The Application of stone laser engraving machine:
It is widely used in cutting, engraving, through-carved, hole drilling on fabric, garment, leather, wood and bamboo, acrylic, craft and gift, marble and granite, ceramic, glass and other non-metal materials. Mainly applicable for engraving for heavy materials, such as gravestone, granite, marble etc.

The rubber stamp laser engraving machine fully demonstrates the combination of traditional craftsmanship and technological innovation. Small professional laser engraving machines are more precise when engraving seals, and can meet the requirements of complex engraving patterns.

3040 CO2 laser engraving machine is mainly used in wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics and glass, etc.
It is widely used in advertising, gifts, shoe materials, toys and other industries.
At the same time, CO2 laser engraving machine has a variety of image formats, such as HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI.

There are many kinds of materials for seals, usually metal, jade rubber, wood, etc. When choosing a stamp engraving machine, you should choose according to the material. General metal, jade materials choose fiber laser machine; wood or rubber and other materials can choose professional rubber seal engraving machine for engraving

Laser engraving seals have more advantages in terms of work efficiency and production cost. The traditional corrosion process will not only bring environmental pollution, but also lower efficiency. Machining and other traditional process applications for engraving depth, the generated waste and coolant will also cause environmental pollution. Although the efficiency is improved, the accuracy is not high, and sharp angles cannot be engraved.

1390 Laser engraving cutting machine is generally used in wood products, plexiglass, stone, crystal, Corinne, paper, two-color plate, alumina, leather, resin and so on.