Fiber laser engraver marker raycus 30w fiber laser marking engraving machine printer laser date code machine
Fiber laser marking machine non-contact processing, no contact with the product surface, marking the workpiece will not produce internal stress, to ensure the original accuracy of the workpiece. No corrosion on the surface of the workpiece, no abrasion, no toxicity, no pollution, no consumables, no harmful substances to the environment and human body, no pollution, in line with international quality standards. The laser marking machine is controlled by an industrial computer, the laser beam under computer control can move at high speed and the marking process can be completed within seconds.
Applicable industries：
1.Mechanical parts: bearings, gears, standard parts, motors, etc.
2.Instrument: panel board, nameplate, precision equipment, etc.
3.Daily necessities: handicrafts, zippers, keychains, sanitary ware, etc.
4.Hardware tools: cutting tools, tools, measuring tools, cutting tools, etc.
5.Auto parts: pistons and piston rings, gears, shafts, bearings, clutches, lights, etc.
6.Electronic components: resistors, capacitors, chips, printed circuit boards, computer keyboards, etc.
1) Laser marking machine marking speed: fiber laser marking machine using laser beam marking, marking speed is relatively fast.
2) laser marking machine marking precision: fiber laser marking machine laser beam is very precise, can accurately help marking operations.
3) laser marking machine marking effect is good: fiber laser marking machine marking out of the pattern beautifully clear, will not appear blurred, the surface is not flat such a phenomenon.
4) laser marking machine without consumables: fiber laser marking machine adjusted to the product can be marked directly on the product, so the rate of consumables is small, marking a success.
| Work Area | 110x110mm,150*150mm,175*175mm,200x200mm ( Optional ) |
| Laser Power | 20W/30W/50W |
| Fiber laser generator | Raycus/Max |
| Laser Pulse Frequency | 20KHz – 200KHz |
| Laser scanner | Sino-Galvo SG7110 |
| Red light dot | Yes |
| Power supply | Taiwan MW (Meanwell) |
| Wavelength | 1064±10nm |
| Beam Quality M2 | <2 |
| Min Line Width | 0.01mm |
| Min Character | 0.15mm |
| Marking Speed | ≤10000mm/s |
| Marking Depth | ≤0.5mm |
| Repeat Precision | ±0.01mm |
| Power Supply | 110V /220V(±10%)/50Hz/4A |
| Gross Power | <500W |
| Laser Module Life | 100000h |
| Cooling Style | Air Cooling |
| System Composition | Laser source, Control System, Industrial Computer, Vibration lens |
| Working Environment | Clean and Dust Free |
| Operating Temperature | 10℃-35℃ |
| Humidity | 5% to 75% (Free of Condensed Water) |
| Power | AC220V, 50HZ, 10Amp Stable Voltage |
| Warranty | 12 Months ,Fiber laer source 35 months |
