DOWIN CNC

The laser engraving machine is suitable for processing most non-metallic materials such as acrylic and MDF; it can be widely used in advertising signs, architectural models, and craft gifts.
Among them, MDF, as a versatile material, is widely used in furniture, building decoration, audio equipment, handicraft production and other industries.
Engraving MDF with a laser is more efficient than cutting it with a traditional knife. The traditional method is not only labor-intensive and inefficient, but also difficult to process complex graphics, which has great defects.

Laser engraving machine is suitable for processing most non-metallic materials such as fabric, acrylic, wood, leather, paper, rubber, plastic, glass, ceramics and marble; it can be widely used in advertising signs, architectural models, craft gifts, seal making, clothing and apparel , Printing and packaging, industrial proofing and other industries.
MDF is a board made of wood fiber or other plant fiber, prepared from fiber, applied with synthetic resin, and pressed under the condition of heating and pressure.

6040 engraving machine can cut any complex shape; high efficiency, low cost, computer design graphics, can cut any shape and size of lace. Fast development speed: Due to the combination of laser and computer technology, users can realize laser engraving output as long as they design on the computer. The machine engraving accuracy and cutting speed are very good, and it also has the characteristics of safe operation and simple maintenance.

The laser engraving machine uses the thermal energy of the laser to engrave the material, and the laser in the laser engraving machine is its core. Generally speaking, laser engraving machines are used in a wider range, with higher engraving precision and faster engraving speed. Moreover, compared with the traditional manual engraving method, laser engraving can also make the engraving effect very delicate, which is no less than the craftsmanship level of manual engraving.

Notes on using 6040 CO2 engraving machine
1. The initial user should first perform red light positioning when performing irregular processing.
2. When processing veneers and volatile materials, adjust the amplitude of the water to be less than 1mm.
3. When cutting, use the workpiece holder to be more than 2 cm away from the worktable.
4. Cleaning of reflective lens and focal length lens: Pinch the reflective lens with two fingers. The other hand holds the camera lens cleaning paper to clean the lens.

Notes on using 6040 CO2 engraving machine
1. When using auto focus, pay attention to the fact that the auto focus rod must be fastened, otherwise the work surface will hit the laser.
2. When the laser engraving machine is working, it is forbidden to open the cover.
3. Turn on the smoke exhaust and blowing equipment during processing.

Principle of CO2 laser cutting machine: In a CO2 laser cutting machine, light is produced when an electric current is passed through a gas-filled tube with mirrors at both ends. One mirror is fully reflective, while the other allows some light to pass through. These mirrors guide the laser beam into the material to be cut. This gas is usually a mixture of carbon dioxide, nitrogen, hydrogen and helium.
Any light produced by a Co2 laser is very powerful compared to ordinary light. This is because there are mirrors at the end of the gas tube. These mirrors reflect most of the light passing through the tube and cause the light waves to increase in intensity.

Trends in Chinese laser equipment:
1) High-speed and high-precision laser cutting machines have created favorable conditions for high-speed and high-precision laser cutting equipment due to the improvement of high-power laser beam patterns and the application of 32-bit microcomputers.
(2) Large-scale laser cutting machines for thick plate cutting and large-size workpiece cutting With the increase of laser power available for laser cutting, laser cutting is developing from sheet metal processing of light industrial thin plates to heavy industrial thick plate cutting.

6040 CO2 laser engraving machine is widely used in industry
Application industry:
Kitchen utensils metal sheet cutting, advertising characters, large-format truncation, clothing proofing, leather industry, shoe industry, decoration industry, furniture industry, packaging and printing industry, model industry, craft gift industry, etc.
Applicable materials:
Sheet metal, acrylic, plexiglass, glass, cloth, leather, paper, bamboo and wood products, film, canvas, etc.

DOWIN CO2 laser engraving and cutting machine has obvious advantages. The optimized design of the mechanical structure saves space, and the structure is not deformed, and the cutting precision is high. Taiwan imported square linear guide, long service life.
With automatic focus, red light positioning and other functions, the accuracy of the machine is improved and its functions are maximized. Able to work on most non-metallic materials, saving time and efficiency.

The 6040 laser engraving machine is widely used, and it is commonly used in the advertising industry and the clothing industry. The advantage of laser processing is that it can quickly engrave and hollow out various patterns on the surface of various upper materials. Since laser processing is a non-contact processing method, it will not produce any external deformation on the upper. It also has many advantages such as high engraving precision, hollow without burrs, and can process any shape.