UV laser marking machine is used for marking PVC pipes
Laser marking technology is widely used in industrial building materials. Dowin’s UV laser marking machine has the characteristics of long-lasting, anti-counterfeiting, anti-collision, high-quality, high-definition, and exquisite.
PVC plastic pipes are often used in construction, used for sewage transportation, drainage pipes, etc., and have very prominent characteristics in terms of hardness and cost performance. Generally, the required production batch, graphic information, etc. will be marked on the surface of the PVC pipe.
As for the marking quality that PVC plastic pipe manufacturers are most concerned about, the marked graphic information can now be guaranteed to be indelible, even if the plastic pipe is continuously used.
The UV laser marking machine manufactured by Dowin has been improved in service life, can run continuously for 24 hours, and has more possibilities in stability and operability. The speed has been improved, allowing it to participate in the flying assembly line and improve the overall production efficiency.
| Marking scope | 110*110(175*175)mm |
| Laser sources | Huaray |
| Laser Head | Sino-Galvo SG7110 |
| Wave length of laser | 355±10nm |
| Minimal character | 0.001mm |
| Marking speed | 7000mm/s |
| Support format | PLT, BMP, DXF, JPG, TIF, AI etc |
| Power supply | 110V/220V/ 50Hz/2kVA |
| Cooling ways | Water Cooling |
| Warranty | 24 months |
Model advantages
1、UV laser belongs to cold light source. Laser cutting or marking has lttle effect on heat, and it is more suitable for deep processing of materials which are sensitive to heat effect.
2、the laser diode pumped by German semiconductor laser is used to output 355nm wavelength laser at 3 times doubling frequency in the optical resonator. The conversion efficiency is high and the beam quality is TEM100 mode.
3、purple at the laser with a pulse width narrower and higher peak power, higher damage threshold of sapphire ceramic materials easily break their damage threshold, so it is easy to damage of polymer materials processing requirements of high threshold (such as medical wire, apple iphone8 connecting line).
4、the focus of the UV laser after the minimum spot can reach 15UM, so it is very suitable for drilling holes.
…
