Laser engraving machine factory

The 6040 laser engraving machine is mainly used to engrave and cut non-metallic materials, such as wood, acrylic, stone and so on.
Laser engraving machines are mastered and used by many small and medium-sized handicraft processors, especially non-metallic laser engraving machines and non-metallic marking machines are widely used in wood products, glass, bamboo slips and bamboo tubes, folk paper-cuts, shadow play and other processing industries.

Laser engraving machines can be subdivided into non-metallic laser engraving machines, such as wooden handicraft engraving machines, stone shadow engraving machines, etc.
The 6040 laser engraving machine is mainly used to engrave and cut non-metallic materials, such as wood, acrylic, stone and so on.

CO2 lasers can engrave and cut almost any non-metallic material. The price of CO2 engraving machine is also relatively cheap, and this is used in many industries, such as advertisement, arts and crafts, leather, toys, garments, model, building upholstery, computerized embroidery and clipping, packaging and paper industry

CO2 engraving uses the computer to control the x-y console to drive the laser head to move and control the laser switch as required. The image information processed by the software has been stored in the computer in a certain way. When the information is read from the computer in sequence, the laser head Just scan back and forth line by line from left to right and top to bottom along the scanning trajectory.

The principle of laser engraving is that the laser beam is transmitted and focused on the surface of the material by the optical mechanism, and the material at the action point of the high-energy density laser beam is rapidly vaporized to form pits.
Mainly used in the engraving and cutting of non-metallic materials, such as wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper

CO2 engraving machines are very widely used in the leather industry. The use of laser cutting machines breaks the problems of traditional manual and electric shears, such as slow speed, difficult typesetting, low efficiency and serious material waste. It is fast and easy to operate
Applicable industries:
advertisement, arts and crafts, leather, toys, garments, model , building upholster, computerized embroidery and clipping, packaging and paper industry.

The principle of laser engraving handicrafts refers to the use of high-energy conspiracy laser beams projected onto the surface of the material, so that the surface of the material can undergo physical and chemical changes, so as to obtain engraving handicrafts with visible patterns.
The engraving machine canbe used in crafts, models, advertising, decoration, electrical appliances, plastic industry acrylic board, medium density decorative board and other non-metal sheet precision cutting.

When using a CO2 engraving machine to engrave wood, the engraving depth is generally required to be relatively deep, so the power is generally set to be relatively high. If you encounter hard wood it may make the engraved graphic presentation darker. If you want to make the color lighter, you can increase the engraving speed and try to engrave several times

In the wood engraved by laser, since each wood has its own characteristics, we should choose the wood according to the specific object we want to engrave. We recommend researching the characteristics of the engraving machine before engraving unfamiliar woods.

The co2 engraving machine can be applied to logs, which are unprocessed wood. It is one of the most common laser processing materials in our daily life, and it is also easy to be engraved and cut. For example, light-colored woods such as birch, cherry or maple are easily vaporized by the laser and are more suitable for carving.
The machine can be used in wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper, leather, rubber, ceramic,glass and other nonmetal materials.

The application of co2 engraving machine can be found in almost every industry, and it has become a very common equipment in our daily work. Now, it is mainly used in advertising industry, craft industry, mould industry, construction industry, printing and packaging industry, wood industry, decoration industry, leather industry…

Co2 Laser engraving machine well work for all non-metal material such as wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper, leather, rubber, ceramic, glass, etc.

The feature of 3040 40w co2 laser engraving machine DIY
1)Perfectly tidy power supply system.The power supply system of the whole machine is strictly in accordance with international standards. Different control power signal lines adopt separate routing design, avoiding electromagnetic interference between various types of signal lines.

2)Adopt high-precision guide rails imported from South Korea.Improve laser engraving and cutting accuracy and ensure that the laser machine runs efficiently and stably for a long time.

3)5mm thick aluminum alloy oxidation work platform, to ensure the level of the work platform, improve the accuracy of object carving.

4)High precision drive motor.The X / Y axis uses a high-precision belt-driven Leadshine motor to improve response speed and cutting engraving accuracy.

5)The latest manual rotary lifting system is fast and stable.

6) Red dot positioning Synchronize with the laser, which make the operation more convenient.