Co2 Laser Machine

CO2 laser engravers are very good at cutting and engraving non-metallic materials, the materials that can be cut and engraved include:
wood, acrylic, paper, cloth, epoxy resin, plastic, rubber, crystal, etc.
CO2 laser cutting machines are widely used in clothing, leather, cloth toys, computer embroidery and cutting, electronic appliances, models, handicrafts, advertising and other industries, as well as decoration, packaging and printing, paper products and other industries.

The co2 laser engraving machine has low cost when engraving items, and is not limited by the number of processing. For small batch processing services, laser processing is cheaper.
Low cost: Not limited by the number of processing, for small batch processing services, laser processing is cheaper.
The materials that CO2 laser engraving machine can cut and engrave include wood, acrylic, paper, cloth, epoxy resin, plastic, rubber, crystal, etc.

The advantages of co2 laser engraving machine processing:
1. Saving and environmental protection: the diameter of the beam and the spot is small, generally less than 0.5mm; the cutting process saves materials and is safe and hygienic;
2. Consistent effect: ensure that the processing effect of the same batch is completely consistent.
3. High-speed and fast: high-speed engraving and cutting can be performed immediately according to the pattern output by the computer.

The advantages of co2 laser engraving machine processing:
1. Wide range: carbon dioxide laser can engrave and cut almost any non-metallic material. And it’s cheap!
2. Safe and reliable: non-contact processing will not cause mechanical extrusion or mechanical stress to the material. No “knife marks”, no damage to the surface of the workpiece; no deformation of the material;
3. Precise and meticulous: the machining accuracy can reach 0.02mm

Laser engraving is to use the computer to control the x-y console to drive the laser head to move and control the switch of the laser as required. The image information processed by the software has been stored in the computer in a certain way. When the information is read from the computer in sequence, The laser head scans back and forth line by line from left to right and top to bottom along the scanning track.
The 3040 laser engraver meets the engraving needs of most materials

The co2 laser engraving machine is an engraving machine using co2 laser technology. This type of laser equipment is a general-purpose model with a rear focus method, small size and high degree of integration.
The laser beam is transmitted and focused on the surface of the material by the optical mechanism, and the material at the action point of the high-energy density laser beam is rapidly vaporized to form pit points, thereby realizing engraving and cutting.

✦Applicable Materials:
CO2 laser cutting and engraving machine is usually used in acrylic,wood, leather, paper, plexiglax,rubber and other nonmetal materials
✦Applicable Industries:
Rubber,plastic,cloth toys,leather ,computer embroidery cutting, mould, crafts ,bamboo and wood, advertising and building decoration ,packaging and printing ,paper products.

Machine Features
✦The drive system adopts high-precision linear guides and sliders, with high precision, wear resistance, low resistance, and fast speed; stable transmission, strong shock absorption capacity, and low noise.
✦The positioning of the red light is accurate, and it is convenient and quick to locate the engraving and cutting position.
✦The laser head is responsive and accurate to ensure the quality of engraving.

3040 CO2 laser engraving machine is mainly used in wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics and glass, etc.
It is widely used in advertising, gifts, shoe materials, toys and other industries.
At the same time, CO2 laser engraving machine has a variety of image formats, such as HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI.

New Laser Engraving and Cutting Machine. The machine is a kind of Laser Engraving Machine System equipped with CO2 laser Tube, it is used to engrave on wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics and glass and etc. It is most suitable and the preferred choice of equipments in industries such as advertisement, gifts, shoes,toys and etc. It supports multiple graphic formats, such as HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI and so on.

Dowin Laser Machine 100W 130W 150W 200W 300W Co2 Laser Cutting Machine Price.Dowin Co2 Laser Cutting Machine is a multi-function laser process device which combines the functions of drawing, engraving and cutting.And with high quality CWG laser tube and more stable lifetime, auto electrical moving table with stainless steel ball screw.

Dowin Co2 Laser Cutting Machine 1390 Features:
Adopt famous brand CWG laser tube and more stable beam.
With the function of restoring from power off continuation on break point.
Advanced DSP control system, professional motion control chip, consecutive, high-speed curve cutting and the shortest path selection function improve the efficiency.
Red light positioning device indicates the location of laser head, eliminate the trouble about manual positioning.

With the further maturity of laser engraving technology, laser engraving machines are more widely used in various industries, such as photo engraving and advertising sign production.
Using a laser engraving machine to engrave photos can help photos restore their true state. The key is to save users more time and maximize value.

The emergence of CO2 1390 laser engraving and cutting machine has successfully solved the problems of tediousness, complexity, difficulty and low efficiency, and provided a good solution for paper-cutting enthusiasts.
At present, CO2 engraving machines have been widely used in the paper-cutting industry, greatly improving the efficiency of paper-cutting.

In addition to making crafts and cutting, the CO2 engraving machine can also be used to engrave mobile phone cases, and the laser engraving and cutting machine can be used to process customized mobile phone cases, which can maximize the display of personalization and achieve the high-precision level of engraving.

CO2 engraving machines are widely used in non-metallic materials, especially in wood engraving and cutting. The laser engraving and cutting machine makes wooden handicrafts, bid farewell to the tedious steps of traditional handicrafts, can restore the authenticity of the material to the greatest extent, greatly improve the accuracy, but also improve the work efficiency.

1390 CO2 laser engraving and cutting machine is mainly used in MDF, Plywood, Acrylic and other materials.
Engraving MDF with a laser is more efficient than cutting it with a traditional knife. The traditional method is not only labor-intensive and inefficient, but also difficult to process complex graphics, which has great defects.

The laser engraving machine is suitable for processing most non-metallic materials such as acrylic and MDF; it can be widely used in advertising signs, architectural models, and craft gifts.
Among them, MDF, as a versatile material, is widely used in furniture, building decoration, audio equipment, handicraft production and other industries.

1390 CO2 laser engraving and cutting machine can cut any complex shape; high efficiency, low cost, computer design graphics, can cut lace of any shape and size.
Fast development speed: Due to the combination of laser and computer technology, users can realize laser engraving output as long as they design on the computer. The engraving accuracy and cutting speed of this machine are very good, and it also has the characteristics of safe operation and simple maintenance.

1390 CO2 laser engraving and cutting machine can be used to engrave and cut MDF. MDF is a board made of wood fiber or other plant fibers, coated with synthetic resin, and pressed under heating and pressure conditions.
1390 MDF can be used to make 3D crafts, and acrylic crafts can also be made

The 1390 CO2 Laser Engraver is suitable for processing most non-metallic materials such as fabric, acrylic, wood, leather, paper, rubber, plastic, glass, ceramic and marble
1390 laser engraving and cutting machine is widely used in advertising signs, architectural models, craft gifts, seal making, clothing and apparel, printing and packaging, industrial proofing and other industries

The carbon dioxide engraving machine is widely used in life and has become a very common equipment in our daily work. It is mainly used in the advertising industry, handicraft industry, mold industry, construction industry, printing and packaging industry, wood industry, decoration industry, leather industry… …

Dowin factory products co2 laser cutting machines and co2 laser engraving machines with high quality.
Dowin 1390 co2 laser cuttes can engrave and cut wood,plywood,mdf,acrylic,paper,stone …with high precision anf quality. And Dowin Factory products different laser machines, such as co2 laser cutting engraving machine,fiber laser cutting machine, fiber laser marking machine, co2 laser marking machine,uv laser marking machine ,cnc plasma cutting machine,laser welding machine and so on.

1390 co2 laser cutter with RUIDA software,electrical moving table and S&A CW5200 water chiller .Dowin factory products co2 laser cutting machine and co2 laser cutting machine and also can customize the machine according to your needs.

The feature of co2 laser cutting machine 150w:
1)Module linear and belt,Leadshine 57 three compartment stepping motor and 3DM580 Driver.
2)Stainless steel electric ball screw lifting table control by software.
3)Famous YL brand Co2 Laser tube
4)RUIDA 6445 control system.
5)Imported ⅡⅥ adnd Wavelength mirror and lens.
6)Honeycomb or Knife working table.
7)Air Compressor ACO-008,550W Exhaust fan.
8)Red light point,Wifi control.
9)S&A Water chiller CW5200

The Application of 1390 co2 laser machine:
It is widely used in electronic, craft and gift, garment, leather, toy, computerized embroidery, packing and printing, shoe making, furniture, advertising industries ect.
Application:
1) Acrylic engraving and cutting
2) Wood/MDF engraving and cutting
3) Leather engraving and cutting
4)Paper engraving and cutting
5) Rubber sheet engraving and cutting
6) Double color board & coated board engraving
7) Marble and stone engraving

The 1390 CO2 laser cutting machine uses a focusing mirror to focus the CO2 laser beam on the surface of the material to melt the material, and at the same time, use the compressed gas coaxial with the laser beam to blow away the melted material, and make the laser beam and the material move relatively along a certain trajectory. , so as to form a certain shape of the slit.
The advantage is:
Good cutting quality: non-contact cutting, the cutting edge is less affected by heat, there is basically no thermal deformation of the workpiece, and the slump formed when the material is punched and sheared is completely avoided, and the cutting seam generally does not require secondary processing.

Laser engraving machines are widely used in the garment industry. Fabrics are very common in our lives, such as clothes, refrigerator covers, etc. are all processed from fabrics. Laser cutting fabric without worrying about wrinkling or twisting, and ensuring consistent cuts across batches. At present, more and more people use laser engraving and cutting machines for processing and bring their crafts to the market to maximize the use of laser engraving technology.

CO2 laser cutting machine technology has developed rapidly in recent years, due to its high cutting dimensional accuracy, no burr in the incision, no deformation of the incision, fast cutting speed and no limitation of processing shape, etc.
The 1390 laser engraving and cutting machine is not affected by the shape of the workpiece during engraving and cutting: the laser processing is flexible, can process any graphics, and can cut pipes and other special-shaped materials

The 1390 CO2 laser cutting machine technology has high cutting dimensional accuracy, no burr in the incision, no deformation in the cutting seam, and can cut non-metals: such as plastic, wood, PVC, leather, textiles and plexiglass, etc.
The 1390 engraving and cutting machine does not damage the workpiece during use: the laser cutting head will not contact the surface of the material to ensure that the workpiece will not be scratched