M542C Leisai genuine two-phase digital driver drives 4/6/8 line stepper motor 32-bit DSP

Dowin stepper motor, reduce motor heat, improve efficiency, smooth motion and ultra-low motor noise, higher torque and higher speed, no need to adjust and always stable, zero speed stability, fast response, lower cost.

Features of100 watt laser engraver :
1. Configure high power and quality CWG laser tube, can work over 10000 hours.
2. With function of restoring from poweroff, continuation function from break point.
3. Transmit files directly from Corel draw and Ruida, Photoshop, Lightburn directly.
4. Adopt imported HIIWIN guide rail with high precision.

Features of the machine
Adjustable speed and power, smooth and precise engraving and cutting USB interface, U-flash disk supported, work with a PC

The Main Features of 1390 laser cutter 100w
1) Ruida 6445 controller + Hiwin guide rail + Leadshine motor and driver + American ⅡⅥ imported focus lens.
2) Front to rear design, suitable for large materials
3) CWG Laser tube or Reci tube optional ( 10000 hours work life-span ).
4) Electrical up and down blade work table, 1300mm*900mm work area, lift distance 300mm

When using a CO2 engraving machine to engrave wood, the engraving depth is generally required to be relatively deep, so the power is generally set to be relatively high. If you encounter hard wood it may make the engraved graphic presentation darker. If you want to make the color lighter, you can increase the engraving speed and try to engrave several times

The laser rubber engraving machine uses the thermal energy of the laser to engrave the material, and the laser in the laser engraving machine is its core. Generally speaking, laser rubber stamp engraving machines are more widely used and have higher engraving accuracy.

Dowin Co2 laser engraving cutting macine used in Acrylic sheet processing, food machinery, textile machinery, construction machinery, precision accessories, ships, metallurgical equipment, elevators, household appliances, craft gifts, tool processing, decoration, advertising, wood processing and other manufacturing and processing industries.

Compared with traditional processing technology, laser rubber seal engraving machine has obvious advantages. Laser cutting combines a high concentration of energy and pressure, enabling stamp engravers to cut smaller and narrower areas of material for engraving

Advantages of carbon dioxide laser engraving machine:
The marked pattern and words are clear and not worn, and the lines can even reach the order of millimeters to microns, which has a strong anti-counterfeiting function

1390 laser machine widely used in different industries. More and more customer want one high quality and stable laser machine, but there are so many different quality and price machines in the laser market, how to compare and get one good CO2 laser machine, hope this article will be helpful for your procurement.

The Dowin stepping motor adopts imported core components, and the raw materials have undergone strict testing and screening. The product materials are better, and the service life is longer, which can fully guarantee the long-term stable operation of the equipment using the stepping motor.

When making the stamp face, make sure that the design file has been mirrored, otherwise the imprint of the stamp will not be able to be read normally. Using a professional seal engraving machine can maximize the efficiency of seal engraving

1)the latest optical, mechanical and electrical integration of technology and design of high-tech products.
2)appearance, performance, accuracy to achieve the perfect combination of both.

CO2 laser cutting machine has the Honeycomb and Blade double workable, cutting and engraving professionally.

1)Red dot positioning Synchronize with the laser, which make the operation more convenient.
2)Ensure the accuracy higher than similar models on the market.
3) Knives and cellular dual cutting platform can meet the cut requirement of a variety of products.
4)DSP control system and Ruida board can ensure the engraving and cutting task completed quickly at one time.
5)Make the processing of various thickness material more convenient.
6)Wide range of applications: Advertising industry, Office industry, Packing industry, Gift industry, Decoration industry, Printing Industry.

The 1390 co2 laser engraving machine is an engraving machine using co2 laser technology. This type of laser equipment is a general-purpose model with a rear focus method, small size and high degree of integration.
The 1390 co2 laser engraving machine is suitable for marking most non-metallic materials, such as paper packaging, plastic products, label paper, leather cloth, glass ceramics, resin plastics, bamboo and wood products, PCB boards, etc.

130w co2 laser cutting machine non metal cutter laser.
1)TAIWAN square rails and belt,Leadshine 57 three compartment stepping motor and 3DM580 Driver.
2)Stainless steel electric ball screw lifting table control by software.
3)Famous YL brand Co2 Laser tube
4)RUIDA 6445 control system.
5)Imported ⅡⅥ adnd Wavelength mirror and lens.
6)Honeycomb or Knife working table.
7)Air Compressor ACO-008,550W Exhaust fan.
8)Red light point,Wifi control.
9)S&A Water chiller CW5200

Dowin 1390 co2 laser engraving machine is suitable for cutting and engraving most non-metallic materials, such as paper packaging, plastic products, label paper, leather cloth, glass ceramics, resin plastics, bamboo and wood products, PCB boards, etc.

Standard accessories
(01)Laser Engraving software Package(English Version)
(02)User Manual(CD)
(03)Industry water cooling system(Chiller)
(04)Airexhaust fan
(05)Air Pump
(06)Communication cable
(07)3 Reflect optics(installed in the machine)
(08)1 Focus optics(installed in the machine)
(09)1 Laser tube
(10)Other tools

Engrave stamps with a laser stamp engraver to laser engrave a large number of personalized stamps in minutes. The engraving in the mass production of stamp writing boards has also been significantly simplified and accelerated.
How to choose a stamp engraving machine is a problem encountered by many customers at present
The general seal laser engraving machine is small in size, light in weight and easy to move.
DOWIN laser stamp engraving machine is a machine specially designed for laser engraving, with high engraving precision and flexibility

The professional laser seal engraving machine is easy to operate, with standardized fonts, easy to learn and use, free conversion of orthographic, inverse, and yin and yang characters to meet the diverse needs of customers

The Main Features of 1390 laser cutter 100w
1) Ruida 6445 controller + Hiwin guide rail + Leadshine motor and driver + American ⅡⅥ imported focus lens.
2) Front to rear design, suitable for large materials
3) CWG Laser tube or Reci tube optional ( 10000 hours work life-span ).
4) Electrical up and down blade work table, 1300mm*900mm work area, lift distance 300mm

Co2 1390 CNC Laser Cutting Edge Features:
EXHUAST FAN: It can expel smoke and fumes to create a safer workspace and extend the service life of your machine.
WATER COOLING SYSTEM: Installed CW5200 water chiller to ensure tube cool down in time ,although for a long working time, the machine also can work smoothly.
WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube.

Made in China high technology 1390 cnc 130w co2 laser cutting engraving machine for wood
✦Applicable Materials:
Our Dowin high quality 130W CO2 laser cutting and engraving machine is usually used in acrylic,wood, leather, paper, plexiglax,rubber and other nonmetal materials

Our co2 laser engraving amchine with higher precision and higher quality.

(1) Cutting:
acrylic,perspex,wood,MDF,plywood,veneer,paper,leather,rubber,fabric,cloth,canvas,foil,leather,fur,foam,plastic,PES,PC,PA,PE,PP,composite material,PVC, etc.
(2) Engraving:
acrylic,perspex,wood,MDF,plywood,stone,marble,glass,jade,crystal, metal coating,paper,leather,rubber,fabric,cloth,plastic,PVC, etc.

Feature of 1390 Co2 CNC Laser Engraving Cutting Machine For Leather Fabric
1) Red dot positioning Synchronize with the laser, which make the operation more convenient.
2) Ensure the accuracy higher than similar models on the market.
3) Knives and cellular dual cutting platform can meet the cut requirement of a variety of products.
4) DSP control system and Ruida board can ensure the engraving cutting task completed quickly at one time.
5) Make the processing of various thickness material more convenient.
6) Wide range of applications: Advertising industry, Office industry, Packing industry, Gift industry, Decoration industry, Printing Industry.

Using a professional rubber laser engraving machine, the processing energy is very low. The laser engraving machine does not have any consumables and consumables of materials. Laser engraving only needs electricity, and it is still very low power consumption. Laser engraving machine processing has the advantage of low energy consumption.

The Advantage of Dowin CO2 laser machine:
VERSATILITY
SAFETY FRAME
SIMPLE CONTROL
SEASY MAINTENANCE
COMPACT DIMENSIONS
ENERGY-SAVING NO CONSUMABLES

The machine has a removable basement, start engraving anytime, anywhere. And the machine has the system of auto focusing.

The stepping motor of the DOWIN laser engraving machine Leadshine is made of high-quality cold-rolled copper sheets and high-temperature resistant permanent magnets, with high reliability and low motor heating. These stepper motors run very smoothly and have no significant resonance zones throughout the speed range.

The principle of laser engraving handicrafts refers to the use of high-energy conspiracy laser beams projected onto the surface of the material, so that the surface of the material can undergo physical and chemical changes, so as to obtain engraving handicrafts with visible patterns.
The engraving machine canbe used in crafts, models, advertising, decoration, electrical appliances, plastic industry acrylic board, medium density decorative board and other non-metal sheet precision cutting.

Using a professional rubber laser engraving machine, the processing energy is very low. The laser engraving machine does not have any consumables and consumables of materials. Laser engraving only needs electricity, and it is still very low power consumption. Laser engraving machine processing has the advantage of low energy consumption.

Advantages and disadvantages of traditional mechanical processing seals: traditional process applications such as machining for engraving depth, the waste and coolant generated will also cause environmental pollution. Although the efficiency is improved, the accuracy is not high, and sharp angles cannot be engraved.
Laser stamp engraving machine can overcome this shortcoming

Professional laser engraving machine configuration:
Power supply: 220V/50Hz, 110V/60Hz,
Laser energy control: 1-100% software setting
Supported graphic formats: BMP, PLT, DST, DXF, AI

1390 Co2 laser cutter
—Applicable industries
Advertisement, arts and crafts, leather, toys, garments, model , building upholster, computerized embroidery and clipping, packaging and paper industry.

The compatibility Dowin laser cutting machine

The Ruida control board works seamlessly with RDWorks for Windows PC (included) and LightBurn (not included)
RDWorks (included) and LightBurn (not included) are compatible with Windows 7, 8, 10 (64/32 bit), XP, 2000, and Vista.
The Ruida controller is compatible with macOS (Version 10.11 and higher) ONLY if you use LightBurn software (not included)
Photo-ready to convert images from HPLG, BMP, GIF, JPG, JPEG, DXF, DST, AI formats, and more into .RD files for laser processing.
4-Pin Port connection for rotary axis devices.

Dowin laser is China laser machine manufacturer supply Trophy Medal Logo Engraving Laser Trophies Cup Engraving Machine Cnc Laser Engraver
Laser engraving machine is perfect for engraving a wide variety of trophies, plaques, medals, awards and more. Our machines go through a strict quality control process so you know every engraved, marked, routed or cut item using the proper tools & setting will exude the same quality. We have a variety of systems that can handle flat, curved, odd-shaped, and cylindrical items in a wide range of materials. Our laser engraving machine offer the flexibility, capability and quality you need for all your awards engraving needs.

Suitable material
Wood products, paper, leather, cloth, plexiglass, epoxy resin, acrylic, wool, plastic, rubber, ceramic tile, crystal, jade, bamboo products and other non-metallic materials.
High-power CO2 lasers can also cut metal materials.

CO2 laser cutting and engraving machine has the high precision laser head, professional optical structure design, high stability ,contunuous and long working hours.

Laser engraving machine is suitable for processing most non-metallic materials such as fabric, acrylic, wood, leather, paper, rubber, plastic, glass, ceramics and marble; it can be widely used in advertising signs, architectural models, craft gifts, seal making, clothing and apparel , Printing and packaging, industrial proofing and other industries.
MDF is a board made of wood fiber or other plant fiber, prepared from fiber, applied with synthetic resin, and pressed under the condition of heating and pressure.

There are multiple power options for the rubber stamp engraving machine. Customers can choose the suitable power according to their needs. The higher the power of the laser stamp engraving machine, the faster the engraving speed. It is suitable for non-metallic materials such as rubber and two-color plates.

Using a stamp engraving machine can improve work efficiency and save work time. Compared with the traditional use of expensive handwork, the laser stamp engraving machine has higher engraving efficiency and lower cost, and is more suitable for mass production

The Dowin stepping motor adopts imported core components, and the raw materials have undergone strict testing and screening. The product materials are better, and the service life is longer, which can fully guarantee the long-term stable operation of the equipment using the stepping motor.

The Application of Ruida Co2 Laser Cutting Machine:
Acrylic Acrylic, Plexiglass, PMMA, Perspex, Organic board, Double color sheet, Wood, Plywood, Veneer, MDF, Balsa, Leather, PU, Shoe Material, Synthetic Leather, Genuine Leather, Fabric, Cloth, Textile
Carpet, Mat, Rug,Wool Felt, Paper, Cardboard, Chipboard, Press Board
Ceramic,Tile, Marble, Glass, Plastic

The main configuration:
*Famous brand CO2 laser tube
*Laser head with auto focus pen
*High precision HIWIN guide rail
*Leadshine 3 phase 57 motors
*Leadshine drivers
*Moving platform controlled by software
*Ruida 6445 software
*S&A brand CW-5200 water chiller
*Double smoke cleaning system
*550W exhaust fan
*008 air pump

The advantages of DW-6040 Laser engraving cutting:
1.It can great control over beam intensity, length and heat output,
2.It uses an extremely low level of power consumption,
3.It can work with a huge range of materials.

Machine work with Coreldraw control system , support different kinds of languages. We can import the stamp design into software,setting suitable parameter and to do cutting And engraving , words with different languages, logos, QR code, bar code, patterns etc All work can be done very well.

1390 Co2 laser cutitng machine Applicable materials
Wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper, leather, rubber, ceramic, glass and other nonmetal materials.

Applicable industries
Advertisement, arts and crafts, leather, toys, garments, model, building upholster, computerized embroidery and clipping, packaging and paper industry.

The machining accuracy of the CO2 engraving machine can reach 0.02mm, which is precise and meticulous, and has no blade, which is safe and hygienic

Co2 1390 CNC Laser Cutting Edge Features:
EXHUAST FAN: It can expel smoke and fumes to create a safer workspace and extend the service life of your machine.
WATER COOLING SYSTEM: Installed CW5200 water chiller to ensure tube cool down in time ,although for a long working time, the machine also can work smoothly.
WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube.

Machine Features
✦Drive system with high precision linear guide and slide block, high precision ,wearresistance, small resistance, high
speed;arc-gear synchronous belt 3m,stabletransmission, strong shock absorption ability and small noise.
✦Red cross accurate position, convenient and quick in finding engraving and cutting position.
✦Equipment with automatic / manual modulation focused laser head, responsive andaccurate to ensure sculpture quality.

Standard accessories
(01)Laser Engraving software Package(English Version)
(02)User Manual(CD)
(03)Industry water cooling system(Chiller)
(04)Airexhaust fan
(05)Air Pump
(06)Communication cable
(07)3 Reflect optics(installed in the machine)
(08)1 Focus optics(installed in the machine)
(09)1 Laser tube
(10)Other tools

Using a laser stamp engraving machine can minimize production costs and improve production efficiency. The use of stamp laser marking machine can be mass-produced to meet the increasing daily needs

Dowin laser engraving machine is equipped with a rotating shaft, three claws with tailstock, good stability, and can engrave cylindrical objects in 360 degrees.

The best selling co2 laser machine is 6090&1390 co2 laser cutting machine in Dowin technology, and with CWG laser tube can improve edge quality, electrical moving table is around 30cm Zaxis height,S&A water chiller can cool down the laser tube easily and quickly and other high quality configurations…

Generally speaking, the depth setting of seal engraving should be 0.5-1.1mm, but the specific content should be judged according to the required engraving.
Dowin laser engraving machine is equipped with its own manual, and provides online technical support to give customers a good experience

Features of100 watt laser engraver :
1. Configure high power and quality CWG laser tube, can work over 10000 hours.
2. With function of restoring from poweroff, continuation function from break point.
3. Transmit files directly from Corel draw and Ruida, Photoshop, Lightburn directly.
4. Adopt imported HIIWIN guide rail with high precision.

6090 1390 Co2 laser cutting machine widely used in electronic, craft and gift, garment, leather, toy, computerized embroidery, packing and printing, shoe making, furniture, advertising industries ect.
Application:
1) Acrylic engraving and cutting
2) Wood/MDF engraving and cutting
3) Leather engraving and cutting
4)Paper engraving and cutting
5) Rubber sheet engraving and cutting
6) Double color board & coated board engraving
7) Marble and stone engraving

Laser engraving is to use the computer to control the x-y console to drive the laser head to move, and to control the laser switch as needed. The image information processed by the software has been stored in the computer in a certain way. When the information is sequentially read from the computer, the laser head scans back and forth line by line from left to right and top to bottom along the scanning track.
The 3040 laser engraving machine meets the engraving needs of most materials, such as wood, acrylic, etc.