Jewelry laser marking machine 50w metal laser marking machine laser engraving machine jewelry fiber engraving laser machine
Fiber laser marking machine using fiber laser, vibrating mirror scanning system, stable output power, good optical mode, beam, marking speed, good effect, high efficiency, can customer mass production needs. The machine looks good, easy to operate, no consumables, low depreciation cost long-term operation trouble-free, maintenance-free, can industrial continuous work requirements.
Fiber laser marking machine is suitable for a wide range of products, especially for hardware tools, knives and kitchenware, plastic products, computer keyboards, metal jewelry, buttons, integrated circuits, packaging bottles and jars, eyeglass frames, sanitary faucets and other products marked engraved. Clear and beautiful marking, permanent marking. Less consumables, simple maintenance. Small size and light weight, small occupation area, can be easily installed on the production line for online marking.
1）The use of high-speed digital oscillator, marking speed, high efficiency of light, no maintenance later.
2）Key start, high safety factor, control protection switch design plus with USB data transmission interface.
3）Large table, with its own hole positioning aluminum plate, free to adjust the fixed marking position.
4) can be precisely adjusted up and down the focal length, insulated material lifting handle wear-resistant and durable, high accuracy of the scale.
| Laser Power | 20W/30W/50W/60W/70W/100W |
| Laser source | JPT/Raycus (IPG optional) |
| Laser Wavelength | 1064nm |
| Q-frequency | 20KHz~30KHz |
| Divergence | 0.3mard |
| Marking Range | 110*110mm/200*200mm/300*300mm |
| Minimum Line Width | 0.02mm |
| Indicate light | Double red light |
| Minimum Character | 0.15mm |
| Marking Depth | 0 ~0.5mm |
| Engraving Line Speed | ≤7000mm/s |
| Repeatability Accuracy | ±0.001mm |
| Beam Quality | M2:1.2~1.8 |
| Support operation system | Win7/8/10 system |
| Graphic Format Supported | BMP,IPG,GIF,TGA,PNG,TIF,AI,DXF,DST,PLT,etc |
| Working Voltage | 110V/220V 50~60Hz |
| Unit Power | <0.5kw |
| Use of the Environment | Clean and Dust Free or Dust less |
| Working Condition:Humidity | 5%-75%,Free of Condensed Water |
| Laser Module Life | >100000 hours |
…
