Metal nameplate marking machine fiber laser marking machine on metal laser engraving machine
The beam quality is good, close to the diffraction limit, so that fine marking can be achieved. Using optical fiber output, equipped with high-speed digital scanning head, marking speed is 2-3 times that of traditional models. The electric-optical conversion rate is as high as 30%, and the power consumption is about 10% of that of traditional models. Adopt air cooling, the whole machine is compact in size. No consumables, no maintenance, long service life.

Fiber laser marking machine adopts fiber laser, galvanometer scanning system, stable output power, good optical mode, excellent beam quality, fast marking speed, good effect, high efficiency. The machine is beautiful in appearance, simple in operation, no consumables, low in depreciation cost, Trouble-free in long-term operation, maintenance-free, and can fully meet the needs of industrial continuous work.

Widely used in electronic components, communications, automobile and motorcycle parts, instruments and meters, aviation, hardware machinery, medicine, food and beverage, cosmetics, drug packaging, medical instruments, crafts and other fields, suitable for all kinds of metal and part of non-metal marking.
Laser power | 20W 30W 50W |
Laser wavelength | 1064nm |
Beam quality | M2<0.05 |
Control software | Ezcad |
Marking depth | ≤0.3mm |
Cutting depth | ≤1mm(30W 50W 100W mark 1-3mins repeatedly then can cut) |
Marking speed | ≤7000mm/s |
Minimum line width | 0.01mm |
Minimum character | 0.5mm |
Marking Size | 110 * 110mm ( 200mm 300mm optional ) |
Electric power | <500W |
Working voltage | 110/220V ± 10%, 50/60HZ |
Cooling way | Air cooling |
Ambient operating temperature | 5° C – 40 ° C |
Supported graphic formats | AI,BMP,DST,DWG,DXF,DXP,LAS,PLT |
System Operation | WinXP/ 7/8/10 32/64bits |
Life-span of Fiber Laser Module | 100 000hours |
Communication Interface | USB |
Machine net weight | 32KG |
Machine dimension size | 70* 35 * 78CM |