High speed stainless steel laser marker jpt fiber laser marking machine for deep engraving
Fiber laser marking machine is a new type of laser marking technology, marking exquisite, beautiful, fine lines, can reach the micron level. And laser marking machine marking of products marked is permanent, can not be erased, will not fade, all can not be changed, it is also difficult to imitate. Whether it is a large workpiece or a small workpiece, fiber laser marking machine is easy to complete, the marking effect is delicate and beautiful, fiber laser marking machine using non-contact processing, will not cause pressure damage to the product workpiece.
High speed stainless steel laser marker jpt fiber laser marking machine for deep engraving
As a new type of laser marking technology, the marking effect is very good and can reach the level of millimeter to micron. For those parts with small and complex shapes, fiber laser marking machine can easily do the marking work, not only the effect is beautiful, but also will not directly touch the object and will not damage it.
The laser marking equipment itself is computer-controlled and can be easily connected to a database system. After integrating the database function into the marking software, customers can verify the authenticity of the product by using the laser code on the corresponding product in the database. The anti-counterfeit data of fiber laser marking machine can be text, barcode, 2D code, etc.
| Work Area | 110x110mm/200x200mm/300*300mm ( Optional ) |
| Laser Power | 20W/30W/50W |
| Fiber laser generator | Raycus |
| Laser Pulse Frequency | 20KHz – 200KHz |
| Laser scanner | Sino-Galvo SG7110 |
| Red light dot | Yes |
| Power supply | Taiwan MW (Meanwell) |
| Wavelength | 1064±10nm |
| Beam Quality M2 | <2 |
| Min Line Width | 0.01mm |
| Min Character | 0.15mm |
| Marking Speed | ≤10000mm/s |
| Marking Depth | ≤0.5mm |
| Repeat Precision | ±0.01mm |
| Power Supply | 110V /220V(±10%)/50Hz/4A |
| Gross Power | <500W |
| Laser Module Life | 100000h |
| Cooling Style | Air Cooling |
| System Composition | Laser source, Control System, Industrial Computer, Vibration lens |
| Working Environment | Clean and Dust Free |
| Operating Temperature | 10℃-35℃ |
| Humidity | 5% to 75% (Free of Condensed Water) |
| Power | AC220V, 50HZ, 10Amp Stable Voltage |
| Warranty | 12 Months ,Fiber laer source 35 months |
