Fiber laser marking machine marking plastic four questions and four answers
Optical fiber marking machine has the advantages of high production efficiency, wide application range and low cost of use. So can the logo marked on the plastic by the fiber laser marking machine be wiped off?
Q: Can the fiber laser marking machine mark plastic materials?
A: Can hit. However, it is only suitable for plastic materials with high ignition point in the marking part. (such as: PC, ABS), those who do not meet the conditions cannot play. There are many kinds of plastic materials. Generally, the hard texture and the darker the color, the easier it is to mark with a fiber optic marking machine.
Q: Can the logo marked on the plastic be wiped off?
A: No. Because laser marking is permanent, it cannot be wiped off unless the surface is scraped off.
Q: Can many different colors of logos be printed on plastic parts?
A: No. The color marked by the fiber laser marking machine is the color of the material itself. Generally, only gray-black can be printed, and the depth of its color can only be adjusted, but multiple colors cannot be printed.
Q: Will marking on plastic burn the product?
A: No. Because the fiber laser marking machine is non-contact processing and the output power is not high, as long as the parameters are adjusted properly, the laser will only vaporize a thin layer of the plastic surface without burning the plastic product itself.
…
…
