Desktop Laser Engraver UV Laser Marking Machine 5w

Reaction UV laser ablation machining is achieved by laser chemistry,which reply on the laser energy to interrupt the bonding between atoms and molecules,making it a small molecule vaporized evaporate.

1. Marking Area: 70*70mm, 110*110mm, 150*150mm.

2. Best Marking Effect: Owning to the orignal Huaray laser source technology, the laser beam is fine and thin to ensure best marking effect.
3. Higher Accuracy: The fiber laser marking machines can reach up to 0.001mm precision.
4. Long lifetime: the lifetime can reach 80,000 – 100,000hours.
5. No consumption parts.

Fiber laser marking machine is one of multi funcitonal laser marking machines.This acrtical can teach you how to mark photo on materials by our laser marking machines. And the most important is if you are interested in this machine, please feel free to contact Summer- 008617788130246

It can process a variety of metal and non-metal materials. It is especially advantageous for marking high hardness, high melting point and brittle materials. It belongs to non-contact processing, does not damage the product, has no tool wear, and has good marking quality. The laser beam is thin, the processing material consumption is small, and the processing heat affected zone is small. High processing efficiency, computer control, easy to realize automation.

Fiber lasers on metal materials can etch deep and clear effects on metal surfaces, while UV lasers etch metals covered with paint or highly reflective metals like copper When there is a problem.

UV laser is cold light source. UV laser with short wavelength, focus, smaller spot, belongs to cold process with a little heat affecting, good beam quality, it can achieve perfect marking. Most materials can absorb ultraviolet laser, it is widely applied on industrial; with very little heat affecting area, it won’t have heat effect, there is no burning problem, pollution-free, non-toxic, high marking speed, high efficiency the machine performance is stable, low power consumption.

The rotating clamp is made of aluminum alloy, which is sturdy and durable. It can adjust the clamping range and the size of the bayonet, which is easy to replace the clamping accessories. It can be disassembled and installed with suitable tailstock accessories at will.

Hello, everyone. Welcome to DOWINCNC website.
Today, Summer will tell you the difference of 3D laser marking machine and 2.5D laser marking machine, If you wanna know more about these machines’ knowledge,pls contact dowin

Application Industry
Dowin UV laser marking machine with its unique low-power laser beam, especially suitable for the high-end market of ultra-fine processing.So uv laser marking machine is very suitable for wine glasses, cosmetics, drugs, food and other macro-molecule material packaging surface marking. The advantage is fine, clear and firmly,and better marking effect, anbd no pollution.

The difference between optical fiber and uv laser marking machine is that the laser is different. The fiber laser marking machine uses a fiber laser, and the uv laser marking machine uses a short wavelength uv laser.

UV laser marking machine is suitable for almost all plastic types of materials, including PE, PVC, PP, PS, PLA, PC and so on.
UV laser marking machine is generally divided into 3W/5W/10W, under normal circumstances 5W can meet most of the marking needs. If a UV marking machine is required, the wattage can be selected according to the material to be marked.

Here is the Photo marking stepsⅡ，StepⅠ,please refer to https://www.dowincnc.com/laser-machine/how-to-mark-photo-on-materials-by-laser-marking-machine-html.html

1. The machine takes 355nm light laser device as the light source. Ultraviolet laser marking machines have the advantage of limiting thermal stress that other laser machines do not.
2, The heat affected area is very small, will not produce thermaleffects, will not produce material scorching problem.
3, The good quality and small focus spotlight could achieve the ultrafine marking with high speed and high efficiency.
4, Pre-installed high-precision practical multi-functional work surface, the table has a number of flexible screw holes, convenient installation of special fixture platform.
5, The cooling system is air cooling, to ensure that the laser longlife, stability, reliable work and other characteristics.
6, High efficiency of the photoelectric conversion and long servicelife.

原文
This UV laser machine is a versatile solution for a range of industries. UV Laser Marking Machine. Medical device manufacturers use these UV or “cold marking” solutions to create smooth, hygienic marks to fulfill FDA requirements, including Unique Device Identification marks.
This UV laser machine is a versatile solution for a range of industries. UV Laser Marking Machine. Medical device manufacturers use these UV or “cold marking” solutions to create smooth, hygienic marks to fulfill FDA requirements, including Unique Device Identification marks.

UV laser can mark identification on common metals, such as stainless steel, copper, aluminum, gold, silver, carbon steel, various alloy steel, tool steel, hard alloy, aluminum alloy, chromium plating, nickel plating, zinc plating, various grinding, polished metal surface, etc. The identification can be logo, product name, technical parameter, supplier name, safety matters, etc.

DOWIN standard UV Laser marking machine is a kind of high quality, high performance laser marking machine.This series are based on the domestic and foreign market, and configure of the international famous brand UV lasers and galvo scanner etc. core optical devices, and improve the performance and stability,greatly reduces the failure rate of the product. Digital configuration of the company independent research and development of high-speed marking control card and powerful software.

UV laser markers can also engrave and mark metals, but they don’t always have the same effect as fiber laser markers. Metal materials that can be engraved by UV laser marking machine include aluminum, gold, platinum, silver, titanium, brass, stainless steel, etc.

The flying laser marking machine is very small in size, so it is very convenient to use manually. The product can be marked manually by following the flow of the production line, which fully realizes the concept that the product can be directly stored in the warehouse after it is offline. It breaks through the trouble that the traditional laser marking machine can only mark static products.

The difference between UV laser marking machine and CO2 laser marking machine and optical fiber marking machine is that the wavelength of the laser is different. The laser wavelength of the optical fiber marking machine is 1064nm, and the laser wavelength of the carbon dioxide laser marking machine is 10.64μm. The laser wavelength of the machine is 355nm

Two characteristics of uv laser marking machine marking on plastic:
①Precision marking: The laser is a diode-pumped laser. Like the metal marking machine, it also has good focusing ability, so it is suitable for fine marking.
②Adaptation of absorption characteristics

DOWIN standard UV Laser marking machine is a kind of high quality, high performance laser marking machine.This series are based on the domestic and foreign market, and configure of the international famous brand UV lasers and galvo scanner etc. core optical devices, and improve the performance and stability,greatly reduces the failure rate of the product. Digital configuration of the company independent research and development of high-speed marking control card and powerful software.

UV laser marking machine can clearly mark all plastics and other materials that have adverse reactions to heat, and is especially suitable for marking food, pharmaceutical packaging materials, drilling micro-holes, high-speed division of glass materials and complex processing of silicon wafers. Graphic cutting and other application fields.

The light wave or ultraviolet spectrum of UV laser marking machine is one of the main reasons why this technology can mark on different materials, because it does not heat the surface of the material like fiber and carbon dioxide laser marking machines, it belongs to cold light engraving.
The laser source of uv laser marking machine is mainly INNGU\HUARAR/AOC, etc. Water cooling is generally used when using UV marking machine.

How to make the trademark LOGO of perfume glass bottles ,ceramic tile more anti-counterfeiting and high-grade matching? The traditional bathroom ceramic trademark adopts the firing process, the cost is high and cannot be changed and the printed trademark is easy to fall off, but the current process is to use a 355nm cold laser UV laser marking machine to engrave on the ceramic, the engraving speed is fast, the cost is low, no consumables, and friendly , The marked word, LOGO trademark is to leave a lasting mark on the surface of the material, with good effect, strong adaptability and wide application range.

What is the difference between UV laser and fiber laser?
The fiber laser uses a different power supplier than the UV laser, other of the difference is that the UV laser needs to be refrigerated by a water chiller, while the Fiber laser is refrigerated only by air

Dowin laser UV laser marking machine is developed with a 355nm UV laser, focused spot is extremely small, which can greatly reduce the mechanical deformation of the material and has little effect on processing heat. It is especially suitable for the high-end market of fine processing. The surface of packaging bottles for cosmetics, medicines, jewelry and other polymer materials is marked with fine effect, the marking is clean, better than ink coding and no pollution. Flexible pcb board marking, dicing, silicon wafer micro-hole, blind hole processing. Among them, 80% of the data lines on the market , the adapter marking is from the UV laser marking.

The UV laser marking machine can also engrave and mark on wood materials such as mahogany, walnut, oak, birch, maple, cherry, pine, spruce, etc. In addition, it can process garments rich in synthetic fibers, including glass and cardboard.

Hello, everyone. Welcome to DOWINCNC website.
Today, Summer will tell you the difference of 3D laser marking machine and 2.5D laser marking machine, If you wanna know more about these machines’ knowledge,pls contact dowin

Application Industry
Dowin UV laser marking machine with its unique low-power laser beam, especially suitable for the high-end market of ultra-fine processing.So uv laser marking machine is very suitable for wine glasses, cosmetics, drugs, food and other macro-molecule material packaging surface marking. The advantage is fine, clear and firmly,and better marking effect, anbd no pollution.

It can process a variety of metal and non-metal materials. It is especially advantageous for marking high hardness, high melting point and brittle materials. It belongs to non-contact processing, does not damage the product, has no tool wear, and has good marking quality. The laser beam is thin, the processing material consumption is small, and the processing heat affected zone is small. High processing efficiency, computer control, easy to realize automation.

Dowin laser UV laser pritner with good design, low maintenance, no consumables, to provide permanent high-quality coding. The DU series laser is suitable for wire, polymer materials, plastics, glass products, metallic paint, acrylic, film packaging, ceramics, pipes and other industries marking. It can print permanent and high-contrast logo on flexible packaging, hard plastic (PE/PP), metal and other materials.

The laser inkjet printer adopts ultraviolet laser, the laser power density is uniform, and the output optical power is stable. The special design scheme ensures that the laser has no light leakage, no anti-interference and other characteristics when the laser is turned off, even on special materials. There will be no shadows and virtual breaks. Digital high-speed scanning galvanometer, small size, fast speed and good stability.

Application Industry
Dowin UV laser marking machine with its unique low-power laser beam, especially suitable for the high-end market of ultra-fine processing.So uv laser marking machine is very suitable for wine glasses, cosmetics, drugs, food and other macro-molecule material packaging surface marking. The advantage is fine, clear and firmly,and better marking effect, anbd no pollution.

DOWIN standard UV Laser marking machine is a kind of high quality, high performance laser marking machine.This series are based on the domestic and foreign market, and configure of the international famous brand UV lasers and galvo scanner etc. core optical devices, and improve the performance and stability,greatly reduces the failure rate of the product. Digital configuration of the company independent research and development of high-speed marking control card and powerful software.

Here is the Photo marking stepsⅡ，StepⅠ,please refer to https://www.dowincnc.com/laser-machine/how-to-mark-photo-on-materials-by-laser-marking-machine-html.html

Dowin laser UV laser marking machine can drill or cut common materials, such as plastic, glass, metals ,etc. Higher laser power, thicker materials to drill or cut. Our 5W UV laser can cut materials with thickness 1mm. Successful UV laser commercialized applications include clothing manufacture, shoe manufacture, crafts and gifts manufacture, machine, parts production, etc. lazer printer marking machine color 3w desktop uv laser marker for Wrist Watch Machine

What’s the features of UV laser marking machine?
Small beam diameter and fine marking line
Good quality and high laser beam stability
Complete machine stability, simple and easy operation
Narrow pulse width, small heat affected zone, workpiece without damage
Suitable for sensitive material as cold light source

1. Higher pulse stability, namely better pulse consistency of laser produces the same carving effect, so the UV marker is very suitable for precision uv marking. Higher pulse repetition frequency meets the need of quick marking and high production efficiency.
2. High efficiency of the photoelectric conversion and long service life.
3. he UV marker can support logos and graphs designed in DXF format from PLT, BMF, AI, JPG, etc.

原文
This UV laser machine is a versatile solution for a range of industries. UV Laser Marking Machine. Medical device manufacturers use these UV or “cold marking” solutions to create smooth, hygienic marks to fulfill FDA requirements, including Unique Device Identification marks.
This UV laser machine is a versatile solution for a range of industries. UV Laser Marking Machine. Medical device manufacturers use these UV or “cold marking” solutions to create smooth, hygienic marks to fulfill FDA requirements, including Unique Device Identification marks.

Fiber laser marking machine is one of multi funcitonal laser marking machines.This acrtical can teach you how to mark photo on materials by our laser marking machines. And the most important is if you are interested in this machine, please feel free to contact Summer- 008617788130246

Small size, low power consumption, the power consumption of the whole machine is less than 500W, water cooling method, small footprint, easy installation, truly energy-saving and portable. High electro-optical conversion efficiency, easy to use, no need for optical adjustment or maintenance, compact structure, high system integration, and fewer failures. Does not require any maintenance, has a long service life and is suitable for working in harsh environments. The processing speed is fast, which is 2-3 times that of the traditional marking machine. The optical scanning galvanometer, the laser repetition frequency is high, and the high speed has no distortion.

The flying laser marking machine is very small in size, so it is very convenient to use manually. The product can be marked manually by following the flow of the production line, which fully realizes the concept that the product can be directly stored in the warehouse after it is offline. It breaks through the trouble that the traditional laser marking machine can only mark static products.

The galvanometer scanning system has stable output power, good optical mode, excellent beam quality, fast marking speed, good effect and high efficiency, which can fully meet the needs of customers for mass production. Our company’s fiber laser marking machine has a beautiful appearance, simple operation, no consumables, and maintenance-free, which can fully meet the needs of industrial continuous work.

1. The machine takes 355nm light laser device as the light source. Ultraviolet laser marking machines have the advantage of limiting thermal stress that other laser machines do not.
2, The heat affected area is very small, will not produce thermaleffects, will not produce material scorching problem.
3, The good quality and small focus spotlight could achieve the ultrafine marking with high speed and high efficiency.
4, Pre-installed high-precision practical multi-functional work surface, the table has a number of flexible screw holes, convenient installation of special fixture platform.
5, The cooling system is air cooling, to ensure that the laser longlife, stability, reliable work and other characteristics.
6, High efficiency of the photoelectric conversion and long servicelife.