High Quality Rings Laser Marking Machine Bird Ring Laser Marking Machine

The main configurations:
– Raycus/JPT fiber laser source (3 year warranty, lifetime last over 100000 hours)
-Genuine EZCAD marking software
-Original Beijing JCZ control card, support WinXP/7/8/10
-High speed Digital SINO GALVO SG7110 galvanometer
-Opex wavelength facial lens 150*150mm
-Meanwell power supply from Taiwan
-Double red light focus system
-Alumina protective shell and work plate
-CE approval

Fine marking effect, fast speed, high efficiency, low processing cost and simple operation. Wide range of power and marking, you can choose the most suitable according to the marking material and the expected effect can be marked on various metal materials, with wear-resistant, corrosion-resistant, permanent, non-polluting and other characteristics. Powerful control software to mark bar codes, 2D codes, product serial numbers, etc., and compatible with various formats of pictures and fonts.

The fiber laser marking machine adopts the laser marking produced by the fiber laser, and the beam quality is good. Its output center wavelength is 1064nm, and the life of the whole machine is about 100,000 hours. It is the most common and widely used laser marking method at present. It can process a variety of metals and non-metals, especially for marking high hardness, high melting point and brittle materials.

There is no need to master professional instructions or professional workshops to use the Dowin laser marking machine. The laser marking machine is small in size and suitable for private manual workshops. Metal and some non-metallic materials can be marked with the laser marking machine.

The advanced laser technology of the portable laser marking machine can quickly attract the curiosity of consumers, and some small objects around them become meaningful immediately through laser marking.

With the development of technology, people have higher and higher requirements for marking accuracy.
More and more people are beginning to use advanced laser marking machines with excellent beam quality to obtain processing effects similar to traditional processing technologies
Using a fiber laser marking machine for processing has high precision, but is cheaper, faster and more flexible.
The cost of fiber laser marking technology can be two to three times cheaper than traditional processing technologies.

Features of enclosed fiber laser marking machine:
1. Fast marking speed, high efficiency and high precision.
2. Beautiful appearance and simple operation.
3. Closed design, protective cover protection.

With the development of technology, laser marking machines are more and more used in our life, but how much do you know about laser marking machines?
The purpose of the lens of the laser marking machine is to form a uniform-sized focused spot of the laser beam in the entire marking plane, which is one of the important accessories of the marking machine.
Different lenses have different marking sizes, but the marking area cannot be increased blindly. If the marking area is too large, the spot diameter and spot size will become larger, which will lead to loss of laser energy, which is not conducive to precision marking

Laser marking machines are widely used in the marking of necklaces, rings and other jewelry. Dowin’s Mini laser marking machine is small in size and light in weight.
Specific parameters of mini laser marking machine:
#High speed Digital Galvo scanner with double red pointer
# 110*110mm-175*175mm Working size
#Packing size : 75*57*34cm
#Gross Weight : 28Kgs

The cost of fiber laser marking machine is low. The production and processing cost of fiber laser marking machine is relatively low. One-time laser compliance molding, low scrap rate, effectively reducing material costs.

The hand-held laser marking machine is small in size and is not limited by the size of the site in daily applications. At the same time, the handheld laser marking machine is easy to move and can meet the needs of large machine marking.
When marking tires, you can use a handheld laser marking machine to mark

Laser marking machine, also known as laser marking equipment, can be divided into fiber laser marking machine, CO2 laser marking machine, ultraviolet laser marking machine and so on according to the different marking products. There are many categories, what should we pay attention to when choosing a laser marking machine?

Fiber laser marking machine is one of multi funcitonal laser marking machines.This acrtical can teach you how to mark photo on materials by our laser marking machines. And the most important is if you are interested in this machine, please feel free to contact Summer- 008617788130246

Here is the Photo marking stepsⅡ，StepⅠ,please refer to https://www.dowincnc.com/laser-machine/how-to-mark-photo-on-materials-by-laser-marking-machine-html.html

The depth of deep engraving is generally deep, so generally the power of the marking machine for deep engraving is relatively large, and deep engraving usually requires a long working time. Laser marking machine should also pay attention to maintenance in daily use

Dowin pet tag engraver fiber laser marking machine. cheap price,high quality and best precision.
So do not miss out this model! It must meet your need, to help you make more money!

Fiber laser marking machine field mirror light sensing light uniformity, compact size, vibrating mirror using new technology new materials new working principle design and manufacturing. Good laser beam, long service life, fast marking speed. Humanized control panel, USB interface, exquisite marking effect. High performance scale, high accuracy, accurate marking positioning.

The laser marking machine adopts non-contact processing and can mark any special-shaped surface without deformation or internal stress. It is suitable for various materials such as metal, plastic, glass, ceramic, wood, leather and so on.

Fiber laser marking machines provide a non-contact process in which the laser beam does not physically interact with the material it is directed at. This ensures that only the area being heated will be affected without damaging any surrounding areas of the material. This is a unique process in which fiber laser marking machines leave extremely accurate, precise and high-quality marks that are readable by both the machine and the human eye.

The non-contact processing method has no mechanical effect during the processing, and will not cause damage to the product, and the yield is high. Full computer control, intuitive operation, simple and friendly interface, using general software to input pattern documents, easy input and powerful.

Advantages of laser marking machine
1. Marking durability: Laser marking is essentially a “destructive removal” process. The marked marks are not easy to imitate and change, and the marks will not be affected by the environment (touch, acidic and alkaline gases, high temperature, low temperature, etc.) and subsided.
2. Non-contact processing: laser marking is processed by non-mechanical “”light knife””, which can print marks on any regular or irregular surface, and the workpiece will not generate internal stress after marking, ensuring the original quality of the workpiece. There is precision.

The nameplate is engraved by the fiber laser marking machine, and the engraving pattern will not become blurred or faded due to the length of the environment and time. The laser marking machine marking the nameplate has the advantages of permanent non-fading, exquisite effect, and fast marking speed.

Flying fiber laser marking machine, also called online laser marking machine. This machine attachs advanced digital high-speed scanning galvanometer-sg7210 scanner. and It can be widely used in food and beverage, pharmaceutical, tobacco, leather industry.

The enclosed fiber laser marking machine can be equipped with different brands of lasers, 20W/30W/50W/100W and other lasers with different powers. The higher the power, the deeper the engraving depth.

The special fixture for Dowin fiber laser marking machine is made of aluminum alloy, which is specially designed for clamping thin sheets, and the quality is guaranteed. It is suitable for marking and cutting of gold sheets, tin and platinum sheets, etc.

It is adopted international advanced technology and the working material is fiber. The diode coupling with fiber to process pump, the pump light will course the particles reverse which can emit high quality laser beam.
1. Compact: The high-tech product, which is combined of laser device, computer, auto controller and precision machinery.
2. High Precision: Re-position precision is 0.002mm
3. High Speed: Imported scanning system makes the scanning speed is up to 8000mm/s~15000mm/s.
4. Easily Operating:Afford the specific marking software based on Windows, which is real-time adjust the laser power and pulse frequency. You can input and output by computer according to edit in the both of the specific marking software and the graphic software such as AutoCAD, CorelDRAW and Photoshop.

Laser marking technology is very popular in all walks of life. With the continuous expansion of market demand, various industries have more and more functional requirements for laser marking machines.
The hand-held laser marking machine is characterized by its very small size, which can be put into the trunk of a car for easy handling, and it can work even in a small workshop.

Choose the most suitable filling method to improve marking efficiency:
1. Two-way filling: the marking efficiency is the best, and the effect is good
2. Back-shaped filling: it is only used when marking thin graphics and fonts, and the efficiency is similar to that of bow-shaped filling
3. One-way filling: the marking efficiency is the slowest, and it is rarely used in actual processing
4. Bow filling: The marking efficiency is the highest, and sometimes there will be problems of connecting lines and unevenness. When marking thin graphics and fonts, the above problems will not occur, so the bow filling is the first choice.

The laser marking machine has obvious advantages in the convenience of jewelry engraving. The laser marking machine has a satisfactory marking effect. It can also mark various fine and complex patterns required by users on the surface of tiny jewelry.

The fiber laser marking machine is easy to use, the technology is relatively mature, the application area is relatively wide, the light spot is small, and it is suitable for fine processing. Air cooling is adopted to reduce the cost of consumables required for water cooling.
1WorkArea: 110x110mm/200x200mm/300*300mm
2) Laser Power: 20W/30W/50W
3) Laser Pulse Frequency:
20KHz – 200KHz

If you want to open a small advertising production studio, a MOPA marking machine can meet your needs. DOWIN laser marking machine can paint on metal and help to create beautiful advertising pages.

Laser marking machines are often used in fields such as auto parts, electronic communications, process processing, and pvc pipes. The production of genus signs is mainly based on raw materials such as stainless steel, copper, iron, aluminum, zinc alloy, and titanium.

The fiber laser marking machine can mark on the metal, so as to realize the personal customization function of the ring by using the fiber laser marking machine, and the beam quality of the fiber laser marking machine is good, which can finely engrave very small workpieces, and the slits are flat Beautiful, fast engraving

Dowin provides customized services, and can provide corresponding machine solutions according to the actual needs of customers to meet the customized needs of customers.
Laser marking machine can mark text, graphics, etc. on leather, acrylic, ABS, PC, stainless steel, etc.

The laser marking machine is mainly composed of three parts: laser, vibrating lens and marking card.
The marking machine that uses fiber laser to produce laser has good beam quality, its output center is 1064nm, and the life of the whole machine is about 100,000 hours.
Compared with other types of laser marking machines, the fiber laser marking machine has a longer service life and has outstanding performance in terms of energy saving and environmental protection.

Fiber laser marking machine marking effect is clear, durable, beautiful, and can be effective anti-counterfeiting; marking machine to replace the traditional inkjet printer, no supplies, long service life, no pollution. Non-contact processing can be in any regular or irregular surface printing mark, and marking the workpiece will not produce internal stress, greatly improving the scope of marking applications.

Dowin adopts an integrated design structure and a new optical path sealing method, which is generally stable and reliable, and has a simple and smooth appearance. It inherits the maturity and practicability of previous generations of solid-state laser marking machines, and further improves the stability of the whole machine by upgrading the software and control system.

It only takes a few seconds for the laser marking machine to engrave some simple text or patterns. The MINI laser marking machine supports QR codes, numbers, text, patterns, photos and other types. The marking is fast and accurate, and the processed information is wear-resistant. Good performance, very suitable for marking content of bird rings, ear tags, dog tags, etc.

Here is the Photo marking stepsⅡ，StepⅠ,please refer to https://www.dowincnc.com/laser-machine/how-to-mark-photo-on-materials-by-laser-marking-machine-html.html

Dowin laser Fiber Laser Marking Machine Advantages as following
1. Focus Finder Can Quickly Find the Focal Length Without Using a Ruler, Just to See if the Red Dots and Red Lines Overlap on the Surface of the Product Which You Want to Mark
2. F-theta Scan Lens.typically Distortion Less Than 1%, Air-spaced Design and High Efficiency Ar Coatings Excellent Throughput and Durability.
3. EZCAD 2.14.7 Stable Performance and High Reliability,ensuring Higher Stability and Shield-utilizing Part of Complex Functions. Compatible with Windows XP/Vista/7/8/10.
4. Quickly Find the Focal Length Without Using a Ruler, Just to See if the Red Dots and Red Lines
5. Customer and Technical Support. Easy Operation, English User Manual and Video.

Laser marking machines can mark many products, mainly customized gifts, handicrafts, nameplates, water cups, gift boxes, etc.
The MINI laser marking machine is very small and portable, and can be used to mark anywhere.

Before laser marking machines were widely used, the traditional method was to use silk screen printing to print on the surface. The silk screen printing ink had a strong contrast, the screen printing dots were not delicate enough, it was difficult to follow the color, and the printing effect was not ideal.
With the widespread emergence of laser marking machines, and many businesses turn to use laser marking machines to mark logos, use this new low-carbon and environmentally friendly process

For customers who have engraving needs such as pen lettering, corporate logo, etc., it is recommended to use laser marking equipment to complete the laser engraving process, especially engraving some blessings on the pen, which can create a personal sense of exclusivity.

Features of laser marking machine:
1 Typesetting can be done at will on the computer, which can reduce processing costs
2 The body of the fiber laser marking machine is small and convenient, and the three-dimensional space occupies a small area
3 The fiber laser marking machine has a long service life and is not easy to be damaged.

Laser marking is a marking method that uses a high-energy density laser to locally irradiate the surface of an object to vaporize or change the surface material, thereby leaving a permanent mark. Therefore, the dog tags and animal ear tags marked by the laser marking machine are Or the nameplate can be used for a longer time, which is more suitable for the use of pet dog tags

Laser marking machine adopts brand fiber laser, high power stability, good beam quality, completely air-cooled and maintenance-free, long life. High-speed oscillator, high processing accuracy, fast marking speed and stable performance. Software interface humanized, easy to learn operation, powerful editing.

Marker Control Panel Instructions
M1: FM laser control mode, suitable for guide post, punching needle, template
M2: without first pulse suppression, use less
M3: Continuous output according to the light signal, suitable for the upper seat of the independent guide post
T-on: Force light output, output laser according to the set mode
T-off: Lock off. (Any mode does not close)
RUN: Running state, output laser according to computer control signal
INNER: Internal control mode (already set, please pull the switch to this position)

The market for laser marking products is very broad, such as jewelry, small pendants, metal lighters, etc., which all require laser marking machines for marking.
The laser marking machine can laser mark any picture and text on the product, including trademark, model, production date, serial number, etc.

Product features of laser marking machine:
1. Lasers belong to four types of lasers, and the radiation is relatively small. The radiation hazard to the human body is within the safe range. Users can use it with confidence.
2. The wavelength of the laser emitted by the laser is 1064nm, which is an infrared laser.

Feature of fiber laser marking machine
1.High-tech,and it can make on both metal and non-metal.
2.Self-clean system
3.Lifetime over 100000hours.
4.Accuracy and speed is very well.
5. This Fiber laser marking machine price is economic and reasonable.

Laser marking machines are one of the fastest marking processes on the market. Among them, the processing speed of the fiber laser marking machine is fast, which is 2-3 times that of the traditional marking machine.
The laser marking machine has high precision and the laser light speed is very fine, which is suitable for marking fine instruments and parts.

The handheld laser marking machine has the characteristics of maintenance-free, and the use cost of the machine is low.

The maintenance of the laser machine is one of the methods to make the machine work better, and the feature of maintenance-free saves customers a lot of unnecessary trouble, saves time, and indirectly improves work efficiency.
Hand-held laser marking machine marking characters are clear, fine, and low energy consumption.

Fiber laser marking machine has good beam quality, smaller focusing spot, can realize ultra-fine marking, wider application range, small heat affected area, no thermal effect, no burning problem, fast marking speed, high efficiency, complete machine It has the advantages of stable performance, small size and low power consumption.

With the development of the jewelry industry, traditional processing methods have been unable to meet the needs of the market. As an advanced processing equipment, laser marking machine has fast processing speed and high efficiency. It can perform non-contact marking processing without any material loss to jewelry products, and the marking pattern is fine and beautiful.

What is the difference between fiber laser marking machine and CO2 laser marking machine?
The main applicable materials of fiber laser marking machine: metal, engineering plastics, electroplating materials, coating materials, spraying materials, etc.
CO2 marking machine is mainly suitable for materials: paper, plastic, resin, wood, leather, glass, etc.
For metal products and non-metal products, users should choose the appropriate marking machine type.