Ruida Control System 1390 Laser Engraving Machine CO2 Laser Cutting Machine Nonmtal Engraving Machine
What should be done for the daily maintenance of the laser cutting machine?
Laser engraving machines are widely used in engraving and cutting of non-metallic materials,
The daily maintenance of the laser engraving and cutting machine requires daily inspection of the machine tool. What are the steps of daily inspection? let’s go into detail
Ruida Control System 1390 Laser Engraving Machine CO2 Laser Cutting Machine Nonmtal Engraving Machine
What should be done for the daily maintenance of the laser cutting machine?
Laser engraving machines are widely used in engraving and cutting of non-metallic materials,
The daily maintenance of the laser engraving and cutting machine requires daily inspection of the machine tool. What are the steps of daily inspection? let’s go into detail
- Before starting up, check the pressure of the laser working gas and cutting gas. If the pressure is not enough, it needs to be replaced in time;
- Check if the X-axis, Y-axis, Z-axis zero point, laser ready status and other buttons are damaged (check the indicator light).
- Check the circulating water level in the chiller, if the water level is insufficient, it needs to be added in time;
- Check whether there is any leakage in the circulating waterway of the external optical path. If there is leakage, it should be cleaned up in time, otherwise it will affect the life of the optical lens;
- After the daily work is completed, the waste materials on the work site should be cleaned up in time to keep the site clean and tidy.
