Applicable Materials of auto fabric cutting machine: Non-metal materials, such as: fabric, garment, leather, cloth,, epoxy resin, wool, stamp, bamboo products.
High Quality Laser Cutting Machine For Applique 1814 1610 1825 Fabric Cutting Machine Label Laser Cutter Dowin laser fabric cutting machines are widely used in the clothing industry, processing various clothing materials, cutting fabrics, fabrics, clothing, trademarks, etc. Laser fabric cutting has many advantages: 【1】Automatic feeding without manual operation, saving time and effort 【2】Saving materials and reducing waste 【3】 The laser head cuts flexibly and is not affected by the pattern
This fabric laser cutter especially applied in fabric and garments industry. -Automatic Feeding and Rolling System — Save man power and greatly reduce costs. -Fabric laser cutter is suitable for engraving and cutting on very long work piece, such as one roller of cloth, fabric, leather, garment. -Top-level configuration, such as: Ruida control system,Taiwan guide rail, famous laser tube, Leadshine drive,57 motor, etc. -Double heads (Optional) with high efficiency and effectiveness work simultaneously.
f customers. It is worth mentioning that DW-1390 Slimline Model as our newest laser equipment. Feature is that install 15CM up down table, bottom Legs are removable, Could pass 90cm door easily. For bulk purchases by agents, one 40 foot container can hold 24 units, saving 30% of the transportation cost and improving the price competitiveness.
The parameter of Co2 laser machine: Work Area (Inches): 35 x 51 Focusing: Automatic Red Dot Alignment Pointer: Yes Vertical Travel of Table (Inches): 13(Powered) Laser Power (Watts): 80, 100, or 130 Power Supply (V/Ph/Hz): 220/1/60 Compatible Software: Ruida, CorelDraw, Photoshop, Lightburn
DW-1814 laser cloth cutting machine is especially suitable for automatic identification, positioning and cutting of materials, automatic extraction of contour cutting, and it is the most advanced laser cutting machine on the market. Product advantages of laser cloth cutting machine: 1) The shooting format is large, the recognition accuracy is high, it is easy to deal with large-format pieces, and the cutting automatically recognizes the outline of the graphics 2) Easy to deal with simple man-machine interface, easy to learn and understand
The Applicable material of DW-1390 Co2 Laser Cutting Machine: DOWIN Co2 laser cutting machine proffessional for non metal materials cutting, such as acrylic,wood, MDF, Plexiglass etc.
CO2 laser engravers use a gas mixture of CO2 for electrical processing to generate a laser beam. The wavelength of the CO2 laser beam is about 10.6 microns. This wavelength is suitable for engraving non-metallic parts such as wood, plastic, textiles, paper and glass.
Compared with other cutting methods, the laser cutting machine has a wide range of applications, and most non-metallic materials can be cut, such as coconut shell, cloth, leather, etc. can be cut with CO2 laser cutting machine
Advantages of laser fabric cutting machine. 1) Support custom service, can be customized according to needs 2) Single and multiple laser heads are available, such as single head, double head, four head laser head 3) Wide range of applicable fabrics, suitable for cotton, linen, leather, paper, chemical fiber, etc..
80W 150W large size CO2 laser engraving cutting machine 13090 for plastic industry Laser cutting plastic and acrylic is widely used in all walks of life, such as light boxes, signs, signs, display stands, display cabinets, instrument dials, packaging boxes, decorations, handicrafts, etc. life can be seen everywhere. The overall quality of plastic acrylic processed by laser cutting machine is beautiful and exquisite, the cutting surface is smooth and smooth, the engraving texture is complete and clear, and the processing format is large, the speed is fast, the process is simple, and it is easy to operate. It is the perfect choice for processing such materials.
The co2 laser engraving machine is suitable for marking most non-metallic materials, such as paper packaging, plastic products, label paper, leather cloth, glass ceramics, resin plastics, bamboo and wood products, PCB boards, etc. The engraving effect of the laser engraving machine on the coconut shell is also very good
6090 1390 Co2 laser cutting machine widely used in electronic, craft and gift, garment, leather, toy, computerized embroidery, packing and printing, shoe making, furniture, advertising industries ect. Application: 1) Acrylic engraving and cutting 2) Wood/MDF engraving and cutting 3) Leather engraving and cutting 4)Paper engraving and cutting 5) Rubber sheet engraving and cutting 6) Double color board & coated board engraving 7) Marble and stone engraving
The Application of Auto Cloth Cutting Machine: CCD laser cutting machine is equipped with advanced Vision system.Camera auto positioning and Laser cutting applied on printed fabric, such as digital printed apparel, sublimated sports garment, cycling clothes, racing suits, swimming suit, printed toys, carpet, home furnishing, banners, flags and so on.
6090 Co2 laser cutting machine FEATURES: 100W Co2 Laser tube RUDIA 6445 control system, support output from RUIDA directly CW5200Water chiller, which ensures the service life of laser tube efficiency. Standard red dot positioning system, auto focus function help operators to locate laser beam easily.
The Main Features of 1390 Co2 laser machine: 1. High speed laser cutting machine adopts high efficiency CWG/YL/RECI laser tube,the laser beam is more stable than the traditional type,and have long life time.
2. Compared with the ordinary laser machine,the series adopts more scientific design and high strength steel-frame structure,which increase the fuselage strength more than 40% to prevent the machine from distortion during long term work.
3. The humanized and modern appearance makes the operation and maintenance quite easy.
Main Features of Dowin dw-1390 laser engraving machine 80W CO2 LASER ENGRAVING MACHINE ENGRAVER Control system:Ruida software(Lightburn supported) Working size:130×90cm Laser tube type: Co2 Glass sealed laser tube Laser power: 80W/100W/130W/150W/180W… Driver type: Leadshine Stepping Motor
1390 Co2 laser cutting machine Advantages 1. Equipped with the protection cover, it not only guarantees the personal safety of the operator, and also makes the entire processing production more environmentally friendly. 2. Adopting the imported laser head, it has the advantages of high processing accuracy, high speed and low noise. 3. With a wide range of applications, it widely used in advertising industry handicraft production, decoration, rubber plate furniture and other industries. 4. With High processing accuracy and the processing accuracy can reach 0.02 mm.
Smart vision co2 laser cutter for fabric cutting machine with Auto feeding system 1: Auto feeding system 2: Inner moduel rail; lens form USA, cutting percision: 0.05mm 3: Advanced Trocen Control system for soft material cutting 4: Water Cooling System with Alarm Protection 5: CE; FDA certificates
CO2 laser engraving and cutting machine does not touch the surface of the object during cutting, to ensure that each product is of high quality, and is widely used in clothing punching, leather and leather goods cutting, etc.
Laser engraving and cutting machines have different classifications according to different lasers. According to different laser generators, the current market can be roughly divided into three types: CO2 laser cutting machine, YAG (solid) laser cutting machine, fiber laser cutting machine
The professional laser fabric cutting machine is equipped with a special CCD lens to ensure full-page cutting accuracy, no material leakage, fast recognition speed and high cutting efficiency. The automatic dual-camera positioning series for the sake of users, the automatic capture positioning cutting machine, the incision has no loose edges and no deformation, and the size is consistent and accurate. High efficiency, low cost, perfect effect, can be designed and manufactured at the same time.
Dowin 100 watt laser engraver machine adopts imported linear guide and RUIDA control software. The machine has stable performance and applicable for different industries. It is the ideal choice for non-metal processing industry.
Hardware characteristics of laser fabric cutting machine: 1. Select Taiwan’s Shangyin straight line motion guide rail to ensure that the laser head is smooth, high, and not shake during operation. It has the characteristics of small cutting, fast speed, and high accuracy 2. Software automatic typography. After designing the cutting pattern, the software automatically typeset, the material pattern is closely fitted to reduce the waste
The 1610 laser fabric cutting machine is specially designed for the fabric industry and plush fabric cutting.
The 1610 100w 130w laser cloth cutting machine can be equipped with a feeding device to realize continuous automatic cutting of coil materials.
The Dowin 1610 laser cloth cutting machine adopts the crawler transfer table, which makes the feeding and receiving convenient and fast, and the cutting efficiency is higher
The laser engraving machine is suitable for processing most non-metallic materials such as acrylic and MDF; it can be widely used in advertising signs, architectural models, and craft gifts. Among them, acrylic is also called PMMA or plexiglass, which is widely used in construction, advertising, transportation, lighting, medicine and other industries. Compared with traditional cutting methods, the use of CO2 laser cutting and engraving machines usually has the following advantages: fast cutting speed, high flexibility, good quality, clean edges (no polishing required), easy operation, low cost.
1] The advantages of 1610 laser cloth cutting machine: –Cut without wear –High efficiency, cost saving, increase benefit –Automatic feeding device, there is no limit to the length of the cut fabric 2] 1610 100w 130w laser fabric cutting machine is mainly used in the fabric industry: Clothing, embroidery cutting, cloth toys, paper products, leather goods industry, model industry, etc. need large-format material cutting, engraving and other industries
The Advantage of Dowin CO2 laser machine: VERSATILITY SAFETY FRAME SIMPLE CONTROL SEASY MAINTENANCE COMPACT DIMENSIONS ENERGY-SAVING NO CONSUMABLES
Laser engraving machine is an advanced equipment that uses laser to engrave the material that needs to be engraved.
Features of laser engraving machine: high processing efficiency, smooth processing edge, wide range of applications.
At present, laser engraving machines are used in various industries, such as advertising industry, woodworking industry, decoration industry, decoration industry, construction industry, sheet metal industry, etc.
There are many factors that affect the price of CO2 laser engraving machine, such as the brand of the machine, parts, CO2 laser tube power and working size, etc. The size of the workbench is not her, the price is different. CO2 CNC laser cutting machines are usually not equipped with large size tables. Common sizes of workbenches are 600*900mm, 1300*900mm, 1300*2500mm. The larger the table size of the machine under the same brand, the higher the price of the CO2 laser cutting machine.
The application of laser cloth cutting machine is mainly: leather garment processing industry: synthetic leather, artificial leather, cloth, fur, etc. The laser fabric cutting machine can engrave, cut, engrave and hollow out complex characters and graphics on leather or fabric. Cutting, engraving, transcending fashion, and expressing individuality in the clothing, home furnishings, gloves, handbags, shoes, hats and toy industries.
The Product Application of 100W Co2 Laser Cutter: Dowin 100w laser cutters are better at cutting non-metallic materials such as bamboo, crystal, horn, paper, plexiglass, marble, cloth, leather, rubber, plastic, etc. Clothing, embroidery, cloth toys, home furnishings, handbags, gloves, toys, leather, leather cutting and surface carving.
Dowin Auto cloth cutting machine with auto feeding system fixed with a selective rolling & automatic feeding system, which make the whole cloth processing steps finish in one time. Dowin Auto cloth cutting machine is suitable for engraving and cutting on very long work piece, such as one roller of cloth,fabric, leather, garment.
The DOWIN1814/1610/1825 laser cutting machine is a fully automatic intelligent model. The machine is equipped with a CCD camera, which can shoot the contour of the cutting object, so as to automatically cut the edge. *Processing area: 1600*1000mm/1800*1400mm *Auto feed cutting table: yes *Cutting Speed: 0-18000mm/min *Camera: Canon *laser tube power: 80W/100W/130W/150W *Laser wave length: 10.6um *Minimum shaping character: Chinese character 2mm/ letter 1mm
1390 co2 laser engraving and cutting machine is mainly used in non-metallic materials, such as common acrylic materials. There are many kinds of plexiglass materials, and there are great differences between imported and domestic products. Therefore, when customers choose laser engraving and cutting machines, if possible, they can send samples to suppliers for testing.
Co2 1390 CNC Laser Cutting Edge Features:
ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to around 8cm or be fully retracted, allowing more control over different focal distance setups. AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise. Front REAR PASS THROUGH: There’s always extra room! And it can accommodate materials larger than the workbed size. BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine.
CO2 laser engraving and cutting machine is widely used in the engraving and cutting of non-metallic materials. The studio uses a laser engraving and cutting machine to assemble flat boards into various three-dimensional models, such as animals, cars and boat models, etc.
CO2 laser engraving machine features: 1. Customized linear slide, high precision, low wear and long service life. 2. high strength, low deformation.
Advantages of CO2 laser cutting machine 1. Fast cutting speed 2. High cutting efficiency 3. Small heat affected zone 4. Narrow incision 5. Suitable for cutting non-metallic materials 6. Not affected by workpiece shape 7. Save material and labor
With the development of economy, the application of laser engraving machine in daily life is more and more extensive, and the laser cloth cutting machine can greatly improve the efficiency of cloth cutting and reduce the production cost.
Laser- type: Sealed CO2 laser tube Control system: Ruida 6445G controller Table type: Auto feeding table Driving system: Stepper motor and driver Position system: Red dot
6090 Co2 lazer engraving machine 80W 100W 130W 150W PCB circuit board lazer cutting machine.CO2 laser engraving machine with a working area of 600*900mm. It can be used to engrave and cut non-metallic materials.
Dowin1610 laser fabric cutting machine has a variety of laser heads such as single head and two heads to choose from. The laser cutting machine adopts a crawler-type working platform, which has fast cutting speed and high utilization rate of fabrics.
The laser cloth cutting machine has multiple power options, 80W, 100W, 130W, and so on. 1600mm×1000mm crawler-type working platform, accuracy ±0.01mm, can be equipped with automatic feeding.
1390 CO2 laser engraving and cutting machine is mainly used in MDF, Plywood, Acrylic and other materials. Engraving MDF with a laser is more efficient than cutting it with a traditional knife. The traditional method is not only labor-intensive and inefficient, but also difficult to process complex graphics, which has great defects.
The advantage of Auto Cloth Cutting Machine Large format: maximum one-time processing 1800x1000mm graphics, to overturn the traditional camera cutting machine can process small graphical problems. High precision: can cope with complex graphics to achieve high-precision cutting, deformation matching algorithm, the deformation can be precisely cut format. Auto feeding system:Saving materials and environmental protection;multi-model cut and arranged parallel algorithms to improve efficiency, save materials, automatic suction humidity and significantly improving the working environment. Configuration 1500W pixel digital camera, to achieve full-page second shot function, effective guarantee uniformity of brightness of the visual field.
Application industry of 1610 100w 130w laser cloth cutting machine: Garment processing industry, plush toy processing industry, leather processing industry, automobile interior processing industry Applicable materials for 1610 100w 130w laser cloth cutting machine: Leather materials, cloth, paper and other non-metallic materials.
CO2 laser engraving and cutting machine can cut quickly at work, with small heat-affected zone and small deformation, which can protect the workpiece to the greatest extent and improve the cutting accuracy
Advantages of laser fabric cutting machine: 1) High precision: can deal with complex graphics to achieve high-precision cutting, deformation matching algorithm, deformation can accurately cut the format
2) Fast cutting speed: Equipped with a high-pixel digital camera, combined with CCD and automatic feeding functions, effectively improving the cutting speed
Laser technology is an advanced processing technology. Medium power CO2 lasers for light industrial customers are widely used. According to different product application fields, they can be divided into low-end, mid-end and high-end, forming different levels of product ladder structure to meet the needs of different levels of customers.
The advantages of DW-6040 Laser engraving cutting: It is a non-contact process.This reduces heat damage to the surrounding area, which increases productivity by decreasing downtime and repair costs
Features Of DW-1390 CO2 Laser Cutting Machine (1)1390 series laser cutting machines adopt DSP digital controlling technology, self-design laser power supply, incorporate designed frame and structure to guarantee stable work. (2)The newest software is matched to Ruida,Lightburn and all other graphics processing softwares for outputing original graphics. (3)This laser cutting machine uses USB port data interface, all parameter storage in USB disk ,to realize high efficiency without accounting computer resource. (4)The RUIDA controlling panel brings friendly computer-human interface and easy operation.
The DW-1390 Co2 Laser Engraving & Cutting Machine: Our range of products include Co2 laser engraving & cutting machine, laser cutting machine, wood laser cutting machine,leather laser cutting machine, acrylic laser cutting machine and portable laser fabric cutting machine.
How to maintain the linear guide rail of the laser engraving machine? Correct maintenance and maintenance of laser engraving machine, laser engraving machine can work better Today we will talk about the maintenance methods of the parts of the laser engraving machine in detail
Application of 1390 co2 laser cutter engraving machine: Wood,orgnic,glass,plastic,garments,paper,leather,rubber,and other nonmental materials. Applicable industries of co2 laser cutter engraving machine: Advertisement,arts,and crafts,toys,computerized embroidery and clipping,garments,model,and construction industy.
The features of DW-1390 Co2 Laser Cutting Machine: #. Professional for non-metal materials cutting, such as acrylic, wood, MDF, etc. #. High Precision and Good Stability: With inported lens and mirroes, famous belts, Ruida system control, etc, the machine can meet the precision parts processin, stable dynamic performance as well as long time working. #. Strenth stainless steel ball screw frame ensures the machine working steability and accuracy after long term use.
The application of co2 engraving machine can be found in almost every industry, and it has become a very common equipment in our daily work. Now, it is mainly used in advertising industry, craft industry, mould industry, construction industry, printing and packaging industry, wood industry, decoration industry, leather industry…
The CO21390 laser engraving and cutting machine can also engrave plywood, which is artificial wood and is one of the commonly used materials for furniture. Carving on plywood is not much different from carving on wood, but it should be noted that the carving depth should not be too deep
The Advantages of DW-1390 Co2 Laser Cutting Machine: 4. Stable running: adopt top world import fiber lasers, stable performance, key parts can reach 100,000 hours; 6. Low cost: Save energy and protect environment. 7. Low maintenance: save maintenance cost.
The machines of DW-1610 laser cloth cutting machine are widely used in the cloth cutting industry: –Automatic feeding CO2 laser cutting machine can automatically cut graphics to achieve infinite length material cutting — Equipped with a crawler-type work platform with a positioning accuracy of 0.1mm –Two exhaust systems ensure perfect cutting results and keep the working environment clean and tidy
As a professional laser factory,and we are always upgrading our machines, for now, the configuration of our 1390 co2 laser cutting engraving machine: -130*90cm working size -CW5200 water chiller with S&A brand -Famous HIWIN square rail from Taiwan -CWG laser tube -Ball screw electrical moving table controlled by softeware -Leadshine 57 3DM5800S motor and driver -Ruida 6445 (work with Lightburn) -ACO008 air pump and 550w exhaust fan -Double exhaust pipes If you have any questions about laser machine,please contact with DOWIN laser.
Dowin Technology produces 6040 co2 laser engraving cutting machine with high quality! Module Linear with high accuracy,for long woking time. S&A CW3000 water chiller,can cool the laser tube down fastly and easily. Ball screw electrical moving table …
The DOWIN1814/1610/1825 laser cutting machine is a fully automatic intelligent model. The machine is equipped with a CCD camera, which can shoot the contour of the cutting object, so as to automatically cut the edge. Advantages of DOWIN Laser Cloth Cutting Machine: 1. Accurate cutting, no focal edge, no yellow edge. 2. The system is lightweight, saves space and is easy to operate. 3. Perfect optical system, stable laser power and long life.
