Application of 1390 laser engraving and cutting machine in acrylic material?
1390 co2 laser engraving and cutting machine is mainly used in non-metallic materials, such as common acrylic materials.
There are many kinds of plexiglass materials, and there are great differences between imported and domestic products. Therefore, when customers choose laser engraving and cutting machines, if possible, they can send samples to suppliers for testing.
Application of 1390 laser engraving and cutting machine in acrylic material?
1390 co2 laser engraving and cutting machine is mainly used in non-metallic materials, such as common acrylic materials.
There are many kinds of plexiglass materials, and there are great differences between imported and domestic products. Therefore, when customers choose laser engraving and cutting machines, if possible, they can send samples to suppliers for testing.
Acrylic is generally cut using low-speed machines. This is because the power of the laser tube is not large, and the accuracy of thin materials is relatively high. Generally, a CO2 laser engraving and cutting machine is used to cut a little thin acrylic material, the cutting effect is good, the cutting surface is smooth, and no secondary grinding is required.
Previously, a Vietnamese customer ordered a 1390 co2 laser engraving and cutting machine to cut 15-20mm acrylic, and found that many customers did not know how much power the machine needed for how thick the material was.
Generally speaking, for cutting acrylic materials below 1.2mm, you can use a 130-150w laser engraving and cutting machine. If you need to cut 15-20mm acrylic, you can use a 300W laser engraving machine for better results.
