Best Laser Marking Machine Fiber Laser Marking Machine Desktop laser Marking Machine

Compared with traditional metal engraving, laser marking machine has many advantages:
1. The metal laser marking machine does not need to contact the engraved workpiece, which saves a lot of fixtures and tools. After marking, the workpiece will not generate internal stress, which ensures the original accuracy of the workpiece.
2. The working surface has no corrosion, no “tool” wear, non-toxic and non-polluting.

The enclosed laser marking machine adopts a fully enclosed design, which protects the human body from the influence of laser radiation to the greatest extent, improves the safety factor of the machine, and also enables the processing dust to be effectively and quickly removed, truly achieving environmental protection and safety.

The enclosed fiber laser marking machine has a protective cover. The enclosed fiber laser marking machine is easy to operate and supports automatic adjustment of the focal length. With protective glass to protect the operator’s safety. The best choice for home users and studios.

The hand-held laser marking machine is compact, easy to carry and carry, and has good flexibility. Customers can process products at home or in places with relatively small space, and flexibly change their work locations.

The hand-held laser marking machine does not need a huge water cooling system during use, only simple air cooling is enough.
Portable laser marking machine has low cost of use, low input cost, long service life, less consumables during use, and high cost performance

The laser marking machine uses a laser beam to make a permanent mark on the surface of the leather material.
The marking effect of the laser marking machine is to expose the deep material through the evaporation of the surface material, so as to carve exquisite patterns, trademarks and characters.
The laser marking machine vaporizes the dye on the surface of the leather through numerically controlled laser irradiation, so as to produce non-fading image patterns, gradient flower shapes, punching and hollowing out effects on various leathers.

Laser marking machines have obvious advantages in production:
1. It has the advantages of fast speed, high precision, good quality and small deformation, which greatly improves the appearance and brand effect of the product;
2. Wide range of applications, almost any material can be engraved, marked, and sprayed;

Laser marking machine using laser processing means, and no processing force between the workpiece, with no contact, no cutting force, the advantages of small thermal impact, to ensure the original accuracy of the workpiece. At the same time, it has wide adaptability to materials, and can make very fine marks on the surface of a variety of materials with good durability.

How to use laser marking machine?

1. Turn on the switch of the marking machine and turn on the marking machine.
2. Open EzCad2., open the previously written graphics, text, large numbers, etc.
3. Clearly mark the part and adjust the focal length.
4. After it is clear and accurate, start marking

Laser marking machines are mainly used to mark metal and non-metal materials, such as gold and silver jewelry, hardware accessories, medical equipment, etc.

Dowin laser is China famous laser machine manufacturer, our laser machine advantage as below:
1. Excellent beam quality with double red light pointer
2. Famous brand Raycus laser source, Laser long working life up to 100,000 hours
3. Machine support Windows operating system in English
4. Special marking software for all kinds of graphic, barcode, number, text, etc.

The laser head can be handheld, especially suitable for marking products that are not convenient to move. Portable design, compact size, easy to move; the machine’s mechanical structure is all made of aluminum alloy, light weight, good heat dissipation; independent research and development of control motherboard and marking software, easy to customize and maintain; can use any office computer to make drawings and markings, eliminating the need to convert graphics between different computers. Adopt imported laser light source, high beam quality, small focusing spot, make marking fine and high definition.

Compared with traditional mechanical engraving, chemical corrosion, screen printing, ink printing, etc., laser marking has the characteristics of low cost, high flexibility, and computer system control.
In comparison, the laser marking machine is more cost-effective and labor-saving as a whole.

General characteristics of the machine, exquisite design, easy to use, easy to move, save space, the use of general air cooling system. Optical fiber output, flexible application, easy operation. No daily maintenance, no consumable parts, long service life. Our portable fiber laser marking machine is compact in design, reasonable in appearance and structure, small and beautiful, suitable for all kinds of laser marking scenes. It is very convenient to operate in a large factory or a small office.

How to choose a marking machine
After all, laser marking machines are machines and equipment. If you encounter problems during long-term use, it is very important to have reliable technical support.
Dowin has been engaged in the production and sales of laser machines for many years, has its own technical team, and has a complete after-sales service system
When purchasing a laser marking machine, pay attention to the configuration of the machine. The higher the configuration of the marking machine, the stronger the stability.

Dowin laser is China laser machine manufacturer supply Fiber marker laser marking machine in China.
The mini fiber laser marking machine DW-20FIE offers a complete solution for fast speed marking and high precision on metal and some nonmetal materials such as some hard plastics.The mini fiber laser marking machine meets user’s requirements of the various elaborate patterns in tiny surface, so this kind of mini fiber laser marker is regarded as the”Smart Laser Marker”.

By using laser as the processing means, there is no processing force between the workpiece and the workpiece, and it has the advantages of no contact, no cutting force, and little thermal influence, which ensures the original accuracy of the workpiece. At the same time, the adaptability to the material is wide, and it is possible to make very fine marks on the surface of many materials and the durability is very good.

We are a leading manufacturer, exporter and supplier of high tech laser machines for marking and engraving and many other material processing applications. We have sufficient technical knowledge and experience, which makes us stand out in the market. Because our products have excellent performance, long service life and low maintenance cost, they are in great demand in the industry. We provide technical guidance to existing and potential customers. Our customers trust us because of the quality and reliability of our laser machines, and we maintain that trust by providing consistent, attentive service.

The words and words on the bracelet can convey the belief of the wearer, and the laser marking machine can clearly mark the specific information. The laser marking machine can engrave logos, patterns and texts on silicone bracelets, plastics and other products, and the operation is simple and easy to learn.

Dowin laser is China famous laser machine manufacturer, our laser machine advantage as below:
1. Excellent beam quality with double red light pointer
2. Famous brand Raycus laser source, Laser long working life up to 100,000 hours
3. Machine support Windows operating system in English
4. Special marking software for all kinds of graphic, barcode, number, text, etc.

The optical parts of the machine are specially used for high-speed laser marking of metal materials, the machine does not need daily maintenance, no consumables, long service life, and the machine adopts a universal air-cooling system. Optical fiber output, suitable for blackening. This machine design is mainly used for barcode marking, data matrix marking, serial number marking, technical data sheet marking, anti-counterfeiting code marking, etc. The machine has small appearance, easy to use, easy to move, save space, flexible to use and easy to operate.

The fiber laser marking machine adopts an integrated modular design structure and a new optical path sealing method, which is generally stable and reliable, and has a beautiful appearance and high grade. The laser marking machine has further improved the stability of the whole machine by upgrading the software and control system

Fiber laser marking machine is mainly used for marking and engraving of stainless steel, aluminum, copper, gold, silver and other metals. The machine has fast marking speed and good effect. It is the first choice for laser marking machine.
1) Genuine EzCad software.
2) Raycus fiber laser sources come with a 3-year warranty.
3) High quality laser beam, the focal diameter does not exceed 20 μm.
4) Special laser head for high-speed marking and high-speed scanning.

What brand of laser marking machine is good?

Now the technology of the laser marking machine is relatively mature. When choosing a machine, it is necessary not only to understand the brand, but also to understand the configuration of the laser marking machine and the service of the supplier.

Fiber lasers stimulate a rare-earth metal known as 1,064nm wavelength. This wavelength is ideal to mark metals, as a good quantity of its energy is absorbed by the material.
Laser marking has become the technology of choice for manufacturers looking for high-quality marking, offering a multitude of advantages compared to older marking methods like dot peen marking, inkjet printing, and printed labels.

Dowin laser Animal tags laser marking machine with famous laser source, which can get good quality marking effect, This laser marking machine also named ear tags laser engraving machine, ear tags laser engraver, ear tags laser priting machine, animal tags laser printing machine, animal tags laser machine, fiber laser marking machine, fiber laser engraving macine for ear tags, cow ear tags laser marking machine, cattle tags laser marking machine, so if you are doing ear tags business, it’s an necessary to purhcase one laser marking machine which can marking logo series number on cattle ear tags, cow ear tags, sheep tags, etc, some buyer maybe want to marking their logo or company name on tags, so you need an laser marking machine for ear tags or laser priting machine.

Fiber laser marking machine adopts fiber laser, vibrating mirror scanning system, stable output power, good optical mode, excellent beam quality, fast marking speed, good effect, high efficiency. Beautiful appearance, simple operation, no consumables, low depreciation costs for long-term operation without failure, maintenance-free, can fully meet the needs of industrial continuous work.

Handheld Portable Fiber Laser Marking Machine 20W 30W 50W
1. Fiber laser marking machine for various metallic materials, some non-metallic materials.
2. Fiber laser source have high beam quality and high reliability. It is suitable for high processing fields that require marking depth, smoothness and precision.Like hardware tools, electronic components industry, medical equipment industry, glasses, watches and clocks, jewellery, plastic tool industry and kitchen and bathroom appliances.
3. Fiber laser marking machine have very long service life, usually 100,000hours and easy for maintain.

As the requirements for machine components in the market are getting higher and higher, micromachining technology is becoming more and more important in the market.
More and more laser marking technology is used in the market, and laser marking machines are used for marking.
Using a laser marking machine to mark metal materials is faster, more flexible, and less costly.
The cost of fiber laser marking technology can be two to three times cheaper than traditional processing technology.

The laser marking machine uses a precision workbench in the process of use, which can perform fine micro-processing. The laser marking machine uses a microscope or a camera system to observe or monitor the condition of the processed surface.

Fiber laser marking machine adopts fiber laser, high-speed oscillator scanning system, stable output power, good optical mode, excellent beam quality, fast marking speed, good effect, high efficiency, small equipment size, no water cooling device, maintenance-free, modular design work stable and reliable, no consumables, low power consumption.

Energy saving and less pollution without consumables, high electro-optical conversion rate and low energy consumption. The marking content is diversified and flexible to meet the needs of personalized market. High marking speed and time efficiency, marking process and results are controllable and visible. The marking result is clear and delicate, and it is not easy to fall off when it is integrated with the substrate. Compact, small and stable equipment structure and strong integration.

If you want to open a small advertising production studio, a MOPA marking machine can meet your needs. DOWIN laser marking machine can paint on metal and help to create beautiful advertising pages.

Laser marking machine can be divided into static and flying according to the working mode. It is recommended to choose flying laser marking machine for marking products on the conveyor belt, and static laser marking machine for static secondary processing.
Fiber laser marking machines and CO2 laser marking machines are generally air-cooled.

Fast marking speed, suitable for industrial mass production, the equipment is widely used, suitable for marking, engraving and cutting in most metal materials. It adopts all digital laser marking and deep carving technology, which has friendly operation and enables more novel marking processes to be realized. It has strong adaptability and wide application range. The equipment can be customized, customers can choose 20W, 30W, 50W laser power according to their own needs, can be selected according to the characteristics of the workpiece with different platforms and fixtures.

The marking content of the fiber laser marking machine is permanent, and the label of the fiber laser marking will not gradually subsidize due to any changes in time, environment and other factors. Moreover, the logo effect is difficult to imitate and change, and it has a strong anti-counterfeiting function.

Applied Materials:
1. All metals: gold, silver, titanium, copper, alloy, aluminum, steel, manganese steel, magnesium, zinc, stainless steel, carbon steel / mild steel, all kinds of alloy steel, electrolytic plate, brass plate, galvanized sheet , Aluminum, all kinds of alloy plates, all kinds of sheet metal, rare metals, coated metal, anodized aluminum and other special surface treatment, electroplating the surface of the aluminum-magnesium alloy surface oxygen decomposition
2. Non-metallic: non-metallic coating materials, industrial plastics, hard plastics, rubber, ceramics, resins, cartons, leather, clothes , wood, paper, plexiglass, epoxy resin, acrylic resin, unsaturated polyester resin material

Fiber laser marking machine is low cost, energy-saving, environmentally friendly, non-fading, in line with international standards. One piece modular design, easy maintenance, compact size, save your valuable space.

How to make qr code by EZCAD software?And how to print qr code on metal and plastic product. We believe this article will help you learn more laser technology

Laser marking machines are widely used in the marking of necklaces, rings and other jewelry. Dowin’s Mini laser marking machine is small in size and light in weight.
Specific parameters of mini laser marking machine:
#High speed Digital Galvo scanner with double red pointer
# 110*110mm-175*175mm Working size
#Packing size : 75*57*34cm
#Gross Weight : 28Kgs

Features of enclosed fiber laser marking machine:
1. Fast marking speed, high efficiency and high precision.
2. Beautiful appearance and simple operation.
3. Closed design, protective cover protection.

The fiber laser marking machine is a relatively advanced marking equipment, and the appearance of the fiber laser marking machine has greatly improved the work efficiency of the marking market.
The small fiber laser marking machine has been favored by many customers for its advantages of fast engraving speed, long service life and good stability.

The fiber laser marking machine has high engraving and marking accuracy, good image and text contrast, smooth surface without burrs, and fiber laser engraving and marking graphics and text can also be processed on stainless steel and titanium materials, which is a good choice for metal marking.

With the development of laser technology, different styles of laser marking machines have appeared. 2 5D 3D deep engraving and embossing fiber laser marking machine is a special marking software that uses laser marking to carry out a deep marking on the surface of aluminum alloy materials to achieve deep engraving effect.

High Quality 20W Fiber Laser Marking Macine Factory.
– Raycus/JPT fiber laser source (3 year warranty, lifetime last over 100000 hours)
-Genuine EZCAD marking software
-Original Beijing JCZ control card, support WinXP/7/8/10
-High speed Digital SINO GALVO SG7110 galvanometer
-Opex wavelength facial lens 150*150mm
-Meanwell power supply from Taiwan
-Double red light focus system
-Alumina protective shell and work plate
-CE/FDA approval

Laser marking machines can mark many products, mainly customized gifts, handicrafts, nameplates, water cups, gift boxes, etc.
The MINI laser marking machine is very small and portable, and can be used to mark anywhere.

The most common laser marking machines on the market mainly include co2 laser marking machines, fiber laser marking machines and Uv marking machines. These types of marking machines have a high market share.

With the development of science and technology, fiber laser marking machines are more and more accepted by more people. The characteristics of laser marking machines are very obvious: small size, low power consumption, long life, high efficiency, maintenance-free, fine spot, no consumables

What is the marking color of the fiber optic marking machine?
Optical fiber laser marking machine is mainly used for metal marking, of course, for some non-metallic materials that can absorb 1064nm, optical fiber marking machine can also mark.
The principle of the laser marking machine is to instantly gasify the surface of the material through the high temperature generated by laser focusing, and generally the color of the material is printed out.

Can process many kinds of metal and some non-metal materials. Marking of bar codes, 2D codes, text graphics, etc. is possible. It is non-contact processing, no damage to the product, and good marking quality. Fast processing speed, processing speed is 2-3 times of the traditional laser marking machine. Laser beam is fine, processing material consumption is very small, processing heat-affected zone is small. High processing efficiency, using computer control, easy to realize automation.

The Dowin laser marking machine process has the characteristics of fineness, high quality and flexibility, which makes the product marking more beautiful and smaller. The laser marking machine is non-contact and durable in the marking process. The fiber laser marking machine does not require consumables. Compared with the traditional marking process, the operating cost of the laser marking machine is low and it is worth long-term investment.

Laser marking machine processing method is simple and flexible, only need to set up the need to mark the graphics on the computer, you can complete the marking needs through the laser, marking the trademark logo can be completed in just a few seconds. Compared with traditional screen printing and other methods, it greatly reduces processing costs and improves processing efficiency, which can bring considerable economic benefits to enterprises. The use of laser marking machine hit the graphic information can not be erased, with the effect of never lose color, and the information is difficult to tamper, can give the product to play the effect of anti-counterfeiting and anti-tampering, can be traced back to the source of the product according to the marking information.

China factory Dowin laser support OEM & ODM, we are in laser industry over 12 years
1. Adopt scanning mirror, which has the advantages of high photoelectric conversion efficiency, long life, fast marking speed, small volume, good output beam quality, high reliability, no maintenance and so on.
2. The software control system supports the software output function such as CORELDRAW, Auto CAD, PHOTOSHOP and so on.

It can realize high-precision and high-speed automatic operation, high production efficiency, easy operation, and supports a variety of file formats.
1) Wuhan Raycus fiber laser generator with 3 years warranty.
2) Beijing genuine EZCAD software supports Win7/8/10.
3) Customized scanner working size 110*110mm-175*175mm.

No contact processing, will not cause pollution to the environment. Fiber laser marking machine marked information cleaning permanent, never fade off. Adopt air-cooled cooling mode, the machine size is small, the output beam quality is good, high reliability. Laser long service life, maintenance free, 100,000 hours of no loss, no power coupling loss, saving the operation cost.

All-in-one design, the fiber laser marking system is small in size, low in power consumption, long in life, high in efficiency, maintenance-free, and easy to install and disassemble. The weight of the whole machine is only 20KG, and the packaging weight is 28KG.

1.Metal: Aluminum, silver, brass, copper, stainless steel, gold, iron, steel,Titanium,coating material, anodized or treated metal,etc.
2.Nonmetal: Hard plastic, rubber, marble, granite, ceramic, ABS, leather, electroplating materials, coating materials, epoxy,etc.

Chips can integrate many electronic components on a silicone board to form circuits to achieve certain functions. However, the size of the chip is very small, which requires the chip laser marking machine to accurately and carefully mark the chip. The laser marking machine has fine, accurate and non-contact marking, and is widely used in chip marking.

The hand-held laser marking machine is small in size and is not limited by the size of the site in daily applications. At the same time, the handheld laser marking machine is easy to move and can meet the needs of large machine marking.
When marking tires, you can use a handheld laser marking machine to mark