The Dowin laser seal engraving machine is specially designed for engraving seals. The system and configuration of the laser engraving machine are converted into seal engraving design. The engraving accuracy and engraving effect are good, which can meet the various needs of customers.
Eva 
Advantages of Rubber Stamp Laser Engraving Machine
Using a professional rubber laser engraving machine, the processing energy is very low. The laser engraving machine does not have any consumables and consumables of materials. Laser engraving only needs electricity, and it is still very low power consumption. Laser engraving machine processing has the advantage of low energy consumption.
How deep is the laser engraving machine engraving seal
The engraving depth is related to factors such as the absorption of the laser by the engraved material, the power of the laser, and the duration of the laser on the engraved material. The laser can perform deep and shallow engraving on the surface of various materials, such as engraving identification codes, trademarks and more complex images.
Advantages of engraving stamps with laser engraving machine
Laser engraving seals have more advantages in terms of work efficiency and production cost. The traditional corrosion process will not only bring environmental pollution, but also lower efficiency. Machining and other traditional process applications for engraving depth, the generated waste and coolant will also cause environmental pollution. Although the efficiency is improved, the accuracy is not high, and sharp angles cannot be engraved.
How to clean the stamp face after laser engraving and cutting
The best way is to use an ultrasonic cleaner, of course, it is also possible to use a detergent to scrub with water.
After using the laser stamp engraver
How can the rubber stamp laser engraving machine further improve production efficiency?
Laser engraving and processing of rubber requires relatively high laser power to achieve a certain level of production efficiency. The higher the laser power, the faster the laser engraving speed.
Can rubber stamps also be laser cut?
Dowin laser engraving machine is a professional seal engraving equipment. When using laser engraving, input the pattern you want to engrave into the computer, and the laser can engrave, which is convenient and fast.
What aspects should be paid attention to when laser processing rubber?
Odors and dust will be generated during laser processing of rubber, so it is very important to have a corresponding powerful dust extraction and purification system. It is recommended to use the top-down method for laser engraving to prevent the accumulation of soot particles from affecting the laser engraving effect.
How deep do I need to be to laser engrave a rubber stamp?
Generally speaking, the depth setting of seal engraving should be 0.5-1.1mm, but the specific content should be judged according to the required engraving.
Dowin laser engraving machine is equipped with its own manual, and provides online technical support to give customers a good experience
How to make a stamp face by laser engraving?
Dowin laser stamp engraving machine is a professional stamp engraving machine, suitable for engraving rubber stamps.
When making the seal face, make sure that the design file has been mirrored, otherwise the imprint of the seal will not be able to be read normally