This Rubber self-inking stamp laser making engraving machine could both engraving and cutting one time to make a Rubber self-inking stamp, high precision and fast.
Main Technical Parameters of the rubber stamp laser making machine
Processing area DW-3040B
Laser tube 40W (60W option)
Engraving speed 0-300mm/s
Cutting speed 0-500mm/s
Resolution ratio <0.01mm
Motor Step motors
Voltage 110V±10%/ 220V±10% ,50HZ ~60HZ
Minimum character Letter 1.0 x 1.0mm
Laser tube's life 5000+ hours
Control system Coreldraw (Ruida option)
Working table Alumina and Honeycomb working table
Graphic Format Supported PLT, DXF, AI, BMP, DST, etc.
Cooling system Water pump
Standard configurations Air compressor,exhaust fan, water pump , handle up-down included
Options Chiller CW-3000,Ruida software,Bracket stand
small desktop 40W 60W rubber stamp se
dowincnc 
High precision laser perfume glass bottles engraving machine UV laser printer
How to make the trademark LOGO of perfume glass bottles ,ceramic tile more anti-counterfeiting and high-grade matching? The traditional bathroom ceramic trademark adopts the firing process, the cost is high and cannot be changed and the printed trademark is easy to fall off, but the current process is to use a 355nm cold laser UV laser marking machine to engrave on the ceramic, the engraving speed is fast, the cost is low, no consumables, and friendly , The marked word, LOGO trademark is to leave a lasting mark on the surface of the material, with good effect, strong adaptability and wide application range.
CO2 Acrylic laser cutting machine laser cutter
there are many advantages of acrylic laser cutting , but also some Disadvantages:
1. Laser cutting equipment is expensive.
2. The cutting heat conduction is fast, and the highly reflective materials are not easy to cut, such as copper and copper alloy materials are not easy to cut.
3. Due to the fast heat conduction, it is easy to deform when cutting thin plates, and cutting mesh products will also produce thermal deformation, which is not suitable for mesh parts processing.
4. The surface of the material may be burnt black or oxidized, but it can be wiped clean.
Factory Supply Wood MDF CO2 Laser Cuting Machine Price Laser 1390
Generally speaking, laser engraving machines are used in a wider range, with higher engraving precision and faster engraving speed. Moreover, compared with the traditional manual engraving method, laser engraving can also make the engraving effect very delicate, which is no less than the craftsmanship level of manual engraving.
Common materials for laser engraving are plexiglass, wood, leather, fabric, plastic, rubber plate for printing, two-color plate, glass, synthetic crystal, horn, cardboard, MDF, marble, jade, etc.
Summer 
150W big size acrylic wood laser cutting machine 2500*1300mm
Advantages of acrylic laser cutting:
1. Not limited by molds, save mold resources: laser processing has great plasticity, and can process arbitrary graphics.
2. The cutting speed is fast, up to 40m /min, which is much faster than wire cutting.
3. Due to the fast cutting speed, all cutting surfaces are smooth and there is no burr on the cutting surface.
4. It will not damage the product, and the laser cutting head will not contact the surface of the material, so it will not scratch the product.
5. Since there is no need for contact cutting and the speed is fast, the cutting edge is less affected by heat and will not cause thermal deformation and slump.
6. It can cut a variety of materials, not only steel, stainless steel, aluminum alloy and other metals, but also non-metals such as plastic, wood, leather, plexiglass and acrylic.
Best Price Stone Engraving Machine CO2 Laser Cutting and Engraving Machine
Generally speaking, laser engraving machines are used in a wider range, with higher engraving precision and faster engraving speed. Moreover, compared with the traditional manual engraving method, laser engraving can also make the engraving effect very delicate, which is no less than the craftsmanship level of manual engraving.
Wide range of applications, commonly used in advertising processing, gift processing, packaging engraving, leather processing, fabric proofing, seal engraving, product marking, seal engraving and many other industries
Hot Sale 1390 Foam Cutting Machine Price 1390 CO2 Laser cut Machine
Machine configuration
1.CDWG brand tube,TAIWAN square rails
2.Leadshine 57 motors and 580 Drivers
3.RUIDA control system
4.Air Compressor,Exhaust fan,wooden package
5.Auto focus &Red pointer
6.Honey or Knife table
7.S&A brand chiller
High Quality Stone Engraving Machine Price CO2 Laser Cutting and Engraving Machine
CO2 Laser Engraving & Cutting Machine is a laser engraving machine system equipped with CO2 laser tube for engraving on materials such as wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics and glass.
The main application industries are advertising, gifts, shoe materials, toys, etc.
CO2 laser engraving and cutting machines generally support various graphic formats such as HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI, etc., which are convenient for engraving and cutting work.
Factory Supply Laser Engraving Bottle Machine CO2 Laser Engraving and Cutting Machine
There are many factors that affect the price of a CO2 laser engraving machine, such as the brand of the machine, parts, CO2 laser tube power and working size.
When choosing a brand machine, we must pay attention to the service of the manufacturer. Whether it is pre-sale or after-sale, service is an important factor.
Full service provides customers with machine safety and timely maintenance of CO2 laser engraving machines. A reliable CO2 laser machine manufacturer can provide a complete and consistent service, such that the quality of the product is higher.
Best Price Rubber Stamp Laser Engraving Machine CO2 Laser Engraving Machine 1390
There are many factors that affect the price of CO2 laser engraving machine, such as the brand of the machine, parts, CO2 laser tube power and working size, etc.
The size of the workbench is not her, the price is different.
CO2 CNC laser cutting machines are usually not equipped with large size tables. Common sizes of workbenches are 600*900mm, 1300*900mm, 1300*2500mm. The larger the table size of the machine under the same brand, the higher the price of the CO2 laser cutting machine.
1390 Paper Cutting Laser Machine CO2 Laser Cutter and Engraver
There are many factors that affect the price of CO2 laser engraving machine, such as the brand of the machine, parts, CO2 laser tube power and working size, etc.
CO2 laser tube power is different, the price is different.
The thickness of the material cut by the wood laser cutting machine varies according to different CO2 laser powers. The higher the CO2 laser power, the thicker the CO2 wood laser cutter can cut. The CO2 laser tube of the same brand, the higher the power, the higher the price.
Best Quality Leather Cloth Engraving and Cutting Machine 1390 CO2 Laser
There are many factors that affect the price of CO2 laser engraving machine, such as the brand of the machine, parts, CO2 laser tube power and working size, etc.
As the main device for generating laser beam, CO2 laser tube is the most important core component of CO2 laser cutting machine. In addition, there are other major components, such as optical lenses, guide rails, racks, stepper motors, chillers, etc. Dowin parts are of excellent quality, stable performance and long service life.
Factory Supply Acrylic Crystal Cutter CO2 Laser Cutting and Engraving Machine
The co2 laser engraving machine is an engraving machine using co2 laser technology. This type of laser equipment is a general-purpose model, with a rear focus method, small size and high degree of integration.
When the laser engraving machine processes the material, it has no contact with the surface of the material, is not affected by mechanical movement, the surface will not deform, and generally does not need to be fixed. Not affected by the elasticity and flexibility of the material, it is convenient for soft materials.
Hot Sale Wood Plywood Laser Cutting Machine CO2 Laser Cuting Machine
CO2 laser engraving and cutting machine has high processing accuracy, fast speed and wide application fields. It is often used in advertising processing, gift processing, packaging engraving, leather processing, fabric proofing, seal carving, product marking, seal carving and many other industries.
Common materials for laser engraving are plexiglass, wood, leather, fabric, plastic, rubber plate for printing, two-color plate, glass, synthetic crystal, horn, cardboard, MDF, marble, jade, etc.
130W 150W big size 1300*2500mm acrylic plastic laser cutting engraving machine
Laser cutting plastic and acrylic is widely used in all walks of life, such as light boxes, signs, display stands, display cabinets, instrument dials, packaging boxes, decorations, handicrafts, etc. life can be seen everywhere. The overall quality of plastic acrylic processed by laser cutting machine is beautiful and exquisite, the cutting surface is smooth and smooth, the engraving texture is complete and clear, and the processing format is large, the speed is fast, the process is simple, and it is easy to operate. It is the perfect choice for processing such materials.
small size high precision rubber stamps laser engraving machine for seal
Rubber stamp Application
Dowin professional seal stamp engraving machine uses high-precision guide rails imported from South Korea selected by Dowin’s professional stamp engraving machine ensure stable mechanical structure and high precision, so the engraved ink storage pad stamp surface is relatively flat, the stamping force is relatively uniform, and there will be no “light printing color in the middle”. , the phenomenon of squeezing ink around the thick “.
The laser spot of Dowin laser tube is thin and the light output is stable, which ensures that the engraving will not have jaggedness, no hair on the edge, and round and blunt corners.
The software is convenient and the engraving and cutting can be completed at one time.
50W aluminum metal laser marking engraving machine
Fiber laser marking machine is capable to mark the metal materials and partial non-metal materials, especially suitable for some fields required more precise and higher smoothness.
The machine is widely used in the electronics separation components, integrated circuit, electrical engineering circuit, mobile communication, hardware, tools, kitchen wares, tool fittings, precise apparatus, eyeglasses and clock, computer keyboard, jewelers’ accessories, plastic buttons, water heating fittings, sanitary ware, PVC pipelines, medical apparatus and packing container, etc.