Dowin CO2 lasers are ideal for laser marking, engraving and cutting systems due to their high performance, reliability and low cost. Dowin Rubber Stamp Laser Engraving Machine Professionally Engrave Stamps with Higher Efficiency
If there is a need to engrave and cut non-metallic materials, CO2 laser engraving and cutting machine is a good choice. Using a laser engraving machine to engrave rubber stamps has higher precision and can be used to engrave complex patterns.
Advantages and disadvantages of traditional mechanical processing seals: traditional process applications such as machining for engraving depth, the waste and coolant generated will also cause environmental pollution. Although the efficiency is improved, the accuracy is not high, and sharp angles cannot be engraved. Laser stamp engraving machine can overcome this shortcoming
The use of laser engraving in stamp production can significantly reduce processing time and improve the efficiency of stamp face engraving. The stamp laser engraving machine is controlled by computer, with higher precision and can engrave complex patterns
The configuration of the laser stamp engraving machine is: Electrical up-down system,Double power supply ,step motor ,Coreldraw software Red eye focus system, Electrical up-down
The configuration of the professional laser stamp engraving machine is: 1.Thicker frame and back door let allow long material pass through 2.Electrical up-down system,Double power supply,step motor,Coreldraw software
When engraving the seal, the laser seal engraving machine reduces the influence of external force on the material, protects the integrity of the seal to the greatest extent, and the edge is smooth, and the engraving effect is more obvious.
Compared with traditional processing technology, laser rubber seal engraving machine has obvious advantages. Laser cutting combines a high concentration of energy and pressure, enabling stamp engravers to cut smaller and narrower areas of material for engraving
When using the rubber laser engraving machine, pay attention to the maintenance of the laser head. The laser head is the main tool for work. In order to prolong the life of the laser head, our small engraving machine should try to rest for about 10-15 minutes after engraving for 50 minutes.
Rubber laser engraving machine is an engraving and cutting equipment. It adopts honeycomb or fixed strip working platform and front and rear through-type design. It is suitable for laser engraving and cutting of various non-metallic materials.
Now seal engraving generally uses materials such as hard glue and rubber as the bottom surface of the seal. Using a small laser engraving machine to engrave the pattern of the seal greatly improves the production efficiency and reduces the production cost.
Using a laser stamp engraving machine can minimize production costs and improve production efficiency. The use of stamp laser marking machine can be mass-produced to meet the increasing daily needs
With the maturity of the development of laser engraving technology, laser engraving machine engraving seals are widely used for graphic processing of products, and laser engraving machines are rapidly used in various materials that need to be engraved.
At present, the materials of seals are mainly rubber, wood, jade, etc. Among these materials, wood and rubber are the most widely used. Laser engraving machine is used to engrave rubber and wood stamps, with high work efficiency and fast speed
The Dowin laser seal engraving machine is specially designed for engraving seals. The system and configuration of the laser engraving machine are converted into seal engraving design. The engraving accuracy and engraving effect are good, which can meet the various needs of customers.
Odors and dust will be generated during laser processing of rubber, so it is very important to have a corresponding powerful dust extraction and purification system. It is recommended to use the top-down method for laser engraving to prevent the accumulation of soot particles from affecting the laser engraving effect.
Generally speaking, the depth setting of seal engraving should be 0.5-1.1mm, but the specific content should be judged according to the required engraving. Dowin laser engraving machine is equipped with its own manual, and provides online technical support to give customers a good experience
Dowin laser stamp engraving machine is a professional stamp engraving machine, suitable for engraving rubber stamps. When making the seal face, make sure that the design file has been mirrored, otherwise the imprint of the seal will not be able to be read normally
Laser engraving machine has a wide range of applications, mainly used to engrave various non-metallic materials: MDF, bamboo and wood products; two-color board, cloth; acrylic, leather; glass, jade, plexiglass, etc.
Laser engraving and processing stamps requires relatively high laser power to achieve a certain level of production efficiency. The greater the laser power, the faster the laser engraving speed.
Using a stamp engraving machine can improve work efficiency and save work time. Compared with the traditional use of expensive handwork, the laser stamp engraving machine has higher engraving efficiency and lower cost, and is more suitable for mass production
At present, the commonly used seals on the market include stone seals, jade seals, and rubber seals. In recent years, the demand for rubber seals is increasing, and the engraving demand for rubber seals is increasing day by day. It is particularly important to have a professional seal engraving machine.
